View the manual for the Onkyo TX-NR686 here, for free. This manual comes under the category receivers and has been rated by 35 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Onkyo TX-NR686 or do you need help? Ask your question here
Power output per channel (20-20KHz@8 Ohm) | - W |
Audio output channels | 7.2 channels |
Receiver type | Surround |
Power output per channel (1KHz@6 Ohm) | 165 W |
Total Harmonic Distortion (THD) | 1 % |
Input impedance | 47 Ω |
Audio D/A Converter (DAC) | 32-bit/384kHz |
HDMI in | 7 |
Component video (YPbPr/YCbCr) in | 2 |
Composite video in | 2 |
Digital audio optical in | 2 |
Audio (L/R) in | 7 |
Digital audio coaxial in | 1 |
Ethernet LAN (RJ-45) ports | 1 |
USB ports quantity | 1 |
Number of HDMI outputs | 2 |
Line-out | ✓ |
Speakers connectivity type | - |
Connectivity technology | Wireless |
Ethernet LAN | ✓ |
Wi-Fi | ✓ |
Bluetooth | ✓ |
Bluetooth version | 4.1 |
Bluetooth profiles | A2DP, AVRCP |
Bluetooth Low Energy (BLE) | ✓ |
Supported radio bands | AM, FM |
AM band range | 522 - 1710 kHz |
FM band range | 57.5 - 108 MHz |
Preset stations quantity | 40 |
Optical drive included | ✗ |
Card reader integrated | ✗ |
Supported graphics resolutions | 3840 x 2160 |
Supported video modes | 2160p |
3D | ✗ |
Video D/A Converter (DAC) | 32-bit/384kHz |
HDCP | ✓ |
HDCP version | 2.2 |
Display | - |
Audio decoders | DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital 5.1, Dolby TrueHD |
Apple docking | - |
Remote control included | ✓ |
Product colour | Silver |
AC input voltage | 220 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 570 W |
Power consumption (standby) | 0.15 W |
Width | 435 mm |
Depth | 379.5 mm |
Height | 173.5 mm |
Weight | 10000 g |
Package dimensions (WxDxH) | 539 x 450 x 260 mm |
Package weight | 12500 g |
Package width | 539 mm |
Package height | 260 mm |
Package depth | 450 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Onkyo TX-NR686 below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Onkyo and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Onkyo owners to provide you with a good answer.
Yes
How do I do it. It only turns on and off and volume up and down
I have a Onkyo 686 receiver running to sub it’s a 7.2 with # 2 subwoofers output only to input working
set tuner to fm station
Can I use a rc-511 on my tx-nr626
On our OnkyoTX-NR686 suddenly we have no sound on the main zone. I can get sound on zone 2. I think my husband may have changed some setting to make this happen but I don’t know what. I tried the troubleshooting guide with no luck. Anybody have any ideas? Thanks
how to get set up screen after never show again
How play 2 zones with same music
What does NG: LCRSLSRBLBR mean?
Posso ligar um subwoofer passivo de 4 ohms + 1 coluna central de 6 ohms+ 6 colunas frontais e traseiros e superiores de 8 ohms?
it cliks when i try to set power on on and of all the time
Number of questions: 17