Onkyo TX-NR1010 manual
EnAV RECEIVERTX-NR1010Instruction ManualContentsSafety Information and Introduction ............2Table of Contents...........................................6Connections .................................................13Turning On & Basic Operations..................23Advanced Operations ..................................54Controlling Other Components...................88Appendix.......................................................97Internet Radio GuideRemote Control Codes
Need help?
Number of questions: 0Do you have a question about the Onkyo TX-NR1010 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Onkyo TX-NR1010 owners to properly answer your question.
About the Onkyo TX-NR1010
View the manual for the Onkyo TX-NR1010 here, for free. This manual comes under the category Receivers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: Engels. Do you have a question about the Onkyo TX-NR1010 or do you need help? Ask your question here
Onkyo TX-NR1010 specifications
General
| Brand | Onkyo |
| Model | TX-NR1010 |
| Product | Receiver |
| EAN | 4961330035888, 4961330035895 |
| Language | Engels |
| Filetype |
Audio
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Audio output channels | 2.0 channels |
| Dynamic power per channel (3 Ohm) | 320 W |
| Dynamic power per channel (4 Ohm) | 270 W |
| Dynamic power per channel (8 Ohm) | 160 W |
| Total Harmonic Distortion (THD) | 0.05 % |
| Input sensitivity | 200 mV |
| Input impedance | 47000 Ω |
| Maximum input level | 5.5 V |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Impedance | 75 Ω |
| Power output per channel (1KHz@6 Ohm) | 200 W |
| Receiver type | Surround |
Inputs
| HDMI in | 9 |
| Component video (YPbPr/YCbCr) in | 2 |
| Composite video in | 5 |
| Digital audio optical in | 3 |
| Remote (IR) input | 1 |
| Digital audio coaxial in | 3 |
| Line-in | ✓ |
| Ethernet LAN (RJ-45) ports | 1 |
| PC in (D-Sub) | ✓ |
| USB ports quantity | 2 |
| Multichannel audio input type | RCA |
Outputs
| Number of HDMI outputs | 2 |
| Component video (YPbPr/YCbCr) out | 1 |
| Composite video out | 1 |
| Remote (IR) output | 1 |
| Multichannel audio output type | RCA |
Ports & interfaces
| Speakers connectivity type | RCA |
| Connectivity technology | Wired |
| 12V trigger | ✓ |
| 12V trigger ports quantity | 12 |
| VGA (D-Sub) ports quantity | 1 |
| RS-232 ports | 1 |
File formats
| Audio formats supported | AAC,FLAC,LPCM,MP3,OGG,WAV,WMA |
Network
| Ethernet LAN | ✓ |
| Wi-Fi | ✗ |
Radio
| Supported radio bands | AM,FM |
| Radio Data System (RDS) | ✓ |
| RDS features | PS,PTY,RT,TP |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Preset stations quantity | 40 |
Optical drive
| Optical drive included | ✗ |
Technical details
| Display | LCD |
| Audio decoders | Dolby Pro Logic,DTS Neo:6 |
| Handheld remote control | ✓ |
| Product colour | Black |
| Apple docking compatibility | Not supported |
| AirPlay | ✗ |
Power
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 850 W |
| Power consumption (standby) | 0.15 W |
Weight & dimensions
| Width | 435 mm |
| Depth | 463.5 mm |
| Height | 198.5 mm |
| Weight | 23000 g |
Packaging content
| Manual | ✓ |
| FM antenna | ✓ |
Other features
| Package width | 610 mm |
| Package depth | 594 mm |
| Package height | 337 mm |
Storage
| Card reader integrated | - |
Video
| 3D | ✓ |
Related product manuals
Frequently Asked Questions
Below, you will find the most frequently asked questions about the Onkyo TX-NR1010.
Is your question not listed? Ask your question here