One for all Grundig URC 1915 manual

One for all Grundig URC 1915
8.6 · 2
PDF manual
 · 50 pages
English
manualOne for all Grundig URC 1915

IMAGE & FUNCTION

1. SUB - SUBTITLES
Subtitles / Untertitel / Sous-titres / Subtítulos / Legendas / Sottotitoli / Ondertiteling
2.
AV INPUT
AV Input / AV-Eingang / Entrée AV / Entrada de AV / Entrada AV / Ingresso AV / AV-ingang
3.
HOME
Home Menu / Home Menü / menu d’accueil / menú de inicio / Menu inicial / Menu Home /
Hoof
dmenu
4. GUIDE
TV Guide, EPG, Guia de television, Guia de TV, guida TV, Tv-gids
5. NETTV
Netflix
154
23

Manual

View the manual for the One for all Grundig URC 1915 here, for free. This manual comes under the category controllers and has been rated by 2 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the One for all Grundig URC 1915 or do you need help? Ask your question here

Need help?

Do you have a question about the One for all and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

One for all Grundig URC 1915 specifications

Below you will find the product specifications and the manual specifications of the One for all Grundig URC 1915.

General
BrandOne for all
ModelGrundig URC 1915
Productcontroller
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the One for all Grundig URC 1915 below.

A battery in my controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What should I do if my television is not responding to the One for all Grundig URC 1915 controller during the initial setup?

If your television is not responding to the One for all Grundig URC 1915 controller during the initial setup, follow these steps: 1. Ensure that the batteries are properly inserted into the controller. 2. Test some of the keys on the controller to see if they work. If they do, your remote is ready to use. If not, proceed to the next step. 3. Point the controller towards the TV and hold down the POWER key until the TV turns off. The remote will send a different power signal every 3 seconds. 4. As soon as the TV turns off, release the POWER key. The LED on the controller will blink twice. 5. Test the rest of the keys on the remote. If they work as your original remote did, your One for all Grundig URC 1915 controller is ready to use. Make sure that your TV is turned on and not on standby mode. If the issue persists, you may need to refer to the troubleshooting section of the manual or contact customer support for further assistance.

How can I fix the issue if some keys on the One for all Grundig URC 1915 controller are not working or not working as expected?

To fix the issue if some keys on the One for all Grundig URC 1915 controller are not working or not working as expected, follow these steps: 1. Test some of the keys on the controller to see if they work. If they do, your remote is ready to use. If not, proceed to the next step. 2. Point the controller towards the TV and hold down the POWER key until the TV turns off. The remote will send a different power signal every 3 seconds. 3. As soon as the TV turns off, release the POWER key. The LED on the controller will blink twice. 4. Test the rest of the keys on the remote. If they work as your original remote did, your remote is ready to use. 5. If some keys still do not work as expected, hold down the key that is not working correctly (e.g., Home key) and point the controller towards the TV. The remote will send a signal every 3 seconds. 6. When the correct function is shown on the TV screen, let go of the key. The LED will blink twice, indicating that your remote is ready to use. If the issue persists or you need to learn new functions to your remote, refer to the manual for further instructions or contact customer support for assistance.

How do I use the power key on the One for all Grundig URC 1915 controller to turn off my television?

To use the power key on the One for all Grundig URC 1915 controller to turn off your television, follow these steps: 1. Ensure that your TV is turned on and not in standby mode. 2. Point the controller towards the TV. 3. Press and hold down the POWER key on the controller. 4. Continue holding the POWER key until the TV turns off. 5. Release the POWER key. 6. The LED on the controller will blink twice, indicating that the TV has been successfully turned off. 7. To turn on the TV again, simply press the POWER key once. If the TV does not turn off or the POWER key does not work as expected, make sure that the batteries in the controller are properly inserted and have sufficient power. If the issue persists, refer to the troubleshooting section of the manual or contact customer support for further assistance.

How can I test the functionality of the One for all Grundig URC 1915 controller after setting it up?

To test the functionality of the One for all Grundig URC 1915 controller after setting it up, follow these steps: 1. Ensure that the controller is properly set up with your TV according to the instructions in the manual. 2. Point the controller towards the TV. 3. Press different keys on the controller, such as volume up/down, channel up/down, or the number keys. 4. Observe if the corresponding functions are performed on the TV. For example, if you press the volume up key, check if the volume on the TV increases. 5. Test other keys on the controller to ensure that they work as expected. 6. If any keys do not work or do not perform the intended functions, refer to the troubleshooting section of the manual for possible solutions. 7. If all the keys on the controller work correctly and perform the desired functions on the TV, the functionality of the One for all Grundig URC 1915 controller has been successfully tested. If you encounter any issues or need further assistance, you can contact customer support for help.

What should I do if the LED on the One for all Grundig URC 1915 controller does not blink twice to indicate that it is ready to use?

If the LED on the One for all Grundig URC 1915 controller does not blink twice to indicate that it is ready to use, you can try the following steps: 1. Ensure that the batteries in the controller are properly inserted and have sufficient power. 2. Point the controller towards the TV and hold down the POWER key until the TV turns off. The remote will send a different power signal every 3 seconds. 3. As soon as the TV turns off, release the POWER key. The LED on the controller should blink twice to indicate that it is ready to use. 4. Test the functionality of the other keys on the remote to ensure they work as expected. 5. If the LED still does not blink twice, try resetting the controller. Hold down the RED + BLUE keys until the LED behind the POWER key blinks twice. 6. After resetting, repeat the setup process and test the functionality of the keys again. If the issue persists, refer to the troubleshooting section of the manual or contact customer support for further assistance.

How do I troubleshoot if the keys on my One for all Grundig URC 1915 controller are not working as expected?

To troubleshoot if the keys on your One for all Grundig URC 1915 controller are not working as expected, follow these steps: 1. Test the keys: After inserting the batteries, test some of the keys on the remote. If they work, your remote is ready to use. If not, proceed to the next step. 2. Power key troubleshooting: Point the remote towards the TV and hold down the power key until the TV turns off. The remote will send a different power signal every 3 seconds. As soon as the TV turns off, let go of the power key. The LED will blink twice. Now test the rest of the keys on the remote. If they work as your original remote did, your remote is ready to use. 3. Individual key troubleshooting: If some keys still do not work as expected, point the remote towards the TV and hold down the key that is not working correctly (e.g., Home key). The remote will send a signal every 3 seconds. When the correct function is shown on the screen, let go of the key. The LED will blink twice, indicating that your remote is ready to use. By following these troubleshooting steps, you should be able to resolve any issues with the keys on your One for all Grundig URC 1915 controller.

How can I fix the issue if the power key on my One for all Grundig URC 1915 controller is not turning off my television?

To fix the issue if the power key on your One for all Grundig URC 1915 controller is not turning off your television, follow these steps: 1. Ensure the TV is on: Make sure your television is turned on and not in standby mode. 2. Power key troubleshooting: Point the remote towards the TV and hold down the power key until the TV turns off. The remote will send a different power signal every 3 seconds. As soon as the TV turns off, let go of the power key. The LED on the remote will blink twice. 3. Test other keys: After the TV turns off, test the functionality of other keys on the remote. If they work as expected, your remote is ready to use. 4. Individual key troubleshooting: If the power key still does not turn off the TV, point the remote towards the TV and hold down the key that is not working correctly (e.g., power key). The remote will send a signal every 3 seconds. When the correct function is shown on the TV screen, let go of the key. The LED on the remote will blink twice. By following these troubleshooting steps, you should be able to fix the issue with the power key not turning off your television using the One for all Grundig URC 1915 controller.

What should I do if I am unable to set up my One for all Grundig URC 1915 controller with my television?

If you are unable to set up your One for all Grundig URC 1915 controller with your television, follow these steps: 1. Test the keys: After inserting the batteries, test some of the keys on the remote. If they work, your remote is ready to use. If not, proceed to the next step. 2. Power key troubleshooting: Point the remote towards the TV and hold down the power key until the TV turns off. The remote will send a different power signal every 3 seconds. As soon as the TV turns off, let go of the power key. The LED will blink twice. Now test the rest of the keys on the remote. If they work as your original remote did, your remote is ready to use. 3. Individual key troubleshooting: If some keys still do not work as expected, point the remote towards the TV and hold down the key that is not working correctly (e.g., Home key). The remote will send a signal every 3 seconds. When the correct function is shown on the screen, let go of the key. The LED will blink twice, indicating that your remote is ready to use. By following these troubleshooting steps, you should be able to set up your One for all Grundig URC 1915 controller with your television successfully.

How can I test the functionality of the keys on my One for all Grundig URC 1915 controller?

To test the functionality of the keys on your One for all Grundig URC 1915 controller, follow these steps: 1. Ensure the batteries are inserted: Make sure the batteries are properly inserted into the remote. 2. Point the remote towards the TV: Aim the remote towards your television. 3. Press the keys: Press each key on the remote one by one. For example, press the volume up key, volume down key, channel up key, channel down key, and other relevant keys. 4. Observe the TV response: As you press each key, observe the response on your TV. Check if the volume changes, channels switch, or any other expected action occurs. 5. Test additional keys: If your remote has additional keys for specific functions, such as menu, input, or power, test those keys as well. 6. Verify functionality: Ensure that each key performs the intended function on your TV. If any key does not work as expected, refer to the troubleshooting steps in the manual or contact customer support for further assistance. By following these steps, you can test the functionality of the keys on your One for all Grundig URC 1915 controller and ensure that they are working correctly with your television.

What should I do if my One for all Grundig URC 1915 controller is not working after completing the setup process?

If your One for all Grundig URC 1915 controller is not working after completing the setup process, follow these steps to troubleshoot the issue: 1. Check the batteries: Ensure that the batteries in the remote are properly inserted and have enough power. Replace the batteries if necessary. 2. Reprogram the keys: If some keys are not functioning correctly, try reprogramming them. Point the remote towards the TV and hold down the key that is not working as expected. The remote will send a signal every 3 seconds. When the correct function is shown on the TV screen, release the key. The LED on the remote will blink twice. 3. Reset the remote: If reprogramming the keys does not resolve the issue, try resetting the remote. Remove the batteries from the remote and press any key for 10 seconds. Then, reinsert the batteries and test the functionality of the keys again. 4. Contact customer support: If the above steps do not solve the problem, reach out to One for all customer support for further assistance. They can provide additional troubleshooting steps or arrange for a replacement if necessary. By following these troubleshooting steps, you should be able to resolve any issues with your One for all Grundig URC 1915 controller not working after completing the setup process.

Is the manual of the One for all Grundig URC 1915 available in English?

Yes, the manual of the One for all Grundig URC 1915 is available in English .

Is your question not listed? Ask your question here

No results