View the manual for the Omron M3W Wide Cuff here, for free. This manual comes under the category sphygmomanometer and has been rated by 2 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Omron M3W Wide Cuff or do you need help? Ask your question here
| Brand | Omron |
| Model | M3W Wide Cuff |
| Product | sphygmomanometer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Omron M3W Wide Cuff below.
Systolic pressure is the top number that the blood pressure monitor will indicate. Systolic pressure refers to the amount of pressure in your arteries during the contraction of your heart muscle.
Diastolic pressure is the lowest number that the blood pressure monitor will indicate. The bottom number refers to your blood pressure when your heart muscle is between beats.
A normal blood pressure is about 120/80.
To turn on the Omron M3W Wide Cuff sphygmomanometer, follow these steps: 1. Press the power button located on the device. 2. Check the batteries. If the device does not turn on, the batteries may be empty. Replace them with new ones according to the instructions in section 2.1 of the manual. 3. Ensure that the batteries are inserted correctly, with the correct polarity (+/-). Incorrect insertion can prevent the device from turning on. Refer to section 2.1 of the manual for guidance. 4. If the device still does not turn on, press the power button again and repeat the measurement. 5. If the problem persists, try replacing the batteries with new ones. 6. If none of the above steps resolve the issue, it is recommended to contact your OMRON retail outlet or distributor for further assistance. Please note that these steps are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
There could be several reasons why the Omron M3W Wide Cuff sphygmomanometer is not turning on. Here are the possible causes and their corresponding remedies: 1. Empty batteries: Replace the batteries with new ones. Refer to section 2.1 of the manual for instructions on installing/replacing the batteries. 2. Incorrect battery insertion: Ensure that the batteries are inserted correctly, with the correct polarity (+/-). Refer to section 2.1 of the manual for guidance on proper battery insertion. 3. Other problems: Press the O/I START button and repeat the measurement. If the problem persists, try replacing the batteries with new ones. If none of these steps solve the problem, it is recommended to contact your OMRON retail outlet or distributor for further assistance. Please note that these troubleshooting steps are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
To properly apply the arm cuff of the Omron M3W Wide Cuff sphygmomanometer, follow these steps: 1. Remove any tight-fitting clothing or rolled-up sleeves from your upper arm. 2. Insert the air plug into the air jack on the device. 3. Put your arm through the cuff loop. 4. Position your arm correctly, ensuring that the bottom edge of the cuff is 1 to 2 cm above your elbow. The marker (arrow under the tube) should be centered on the middle of your inner arm. 5. Close the fabric fastener firmly to secure the cuff in place. Please note the following: - Do not place the cuff over thick clothes. - When measuring on the right arm, be careful not to rest your arm on the air tube. - The blood pressure can differ between the right arm and the left arm, so it is recommended to always use the same arm for measurement. If you encounter any issues or have further questions, please refer to the Troubleshooting section in the manual or contact your OMRON retail outlet or distributor for assistance.
There could be several reasons why the arm cuff of the Omron M3W Wide Cuff sphygmomanometer is not inflating. Here are the possible causes and their corresponding remedies: 1. Arm cuff not applied correctly: Ensure that the arm cuff is applied correctly according to the instructions in section 3.1 of the manual. 2. Movement or talking during measurement: Remain still and avoid talking during the measurement. This can interfere with the proper inflation of the arm cuff. Refer to section 3.3 of the manual for more information. 3. Clothing interfering with the arm cuff: Remove any clothing that may be obstructing the arm cuff. This can prevent proper inflation. Refer to section 3.1 of the manual for guidance. 4. Air tube not securely connected: Check that the air tube is securely connected to the main unit. Ensure a proper connection according to section 3.1 of the manual. 5. Air leakage from the arm cuff: If there is air leakage from the arm cuff, it may need to be replaced with a new one. Refer to Chapter 5 of the manual for instructions on replacing the arm cuff. If none of these steps resolve the issue, it is recommended to contact your OMRON retail outlet or distributor for further assistance. Please note that these troubleshooting steps are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
To take a blood pressure reading with the Omron M3W Wide Cuff sphygmomanometer, follow these steps: 1. Sit in a comfortable and relaxed position with your feet flat on the floor and your back supported. 2. Insert the air plug into the air jack on the device. 3. Put your arm through the cuff loop and position the cuff on your upper arm, ensuring that the bottom edge of the cuff is 1 to 2 cm above your elbow. 4. Close the fabric fastener firmly to secure the cuff in place. 5. Press the O/I START button to turn on the device. 6. Sit still and avoid talking during the measurement. 7. The cuff will automatically inflate and deflate, and the device will display your blood pressure reading on the screen. 8. Take note of your systolic (top number) and diastolic (bottom number) blood pressure values. 9. Press the O/I START button again to turn off the device. Please note that it is important to follow the instructions in the manual for accurate and reliable blood pressure measurements. If you have any concerns or questions, consult the Troubleshooting section in the manual or contact your OMRON retail outlet or distributor for assistance.
There could be several reasons why the Omron M3W Wide Cuff sphygmomanometer is not displaying a blood pressure reading. Here are the possible causes and their corresponding remedies: 1. Arm cuff not applied correctly: Ensure that the arm cuff is applied correctly according to the instructions in section 3.1 of the manual. 2. Movement or talking during measurement: Remain still and avoid talking during the measurement. This can interfere with the accurate reading. Refer to section 3.3 of the manual for more information. 3. Weak or unstable pulse: If your pulse is weak or irregular, the device may not be able to detect it properly. Ensure that you are in a calm and relaxed state during the measurement. 4. Device not positioned correctly: Make sure that the device is positioned at heart level. Sit in a comfortable position with your back supported and your arm resting on a table or armrest. 5. Low battery power: Check the battery level and replace the batteries if necessary. Refer to section 2.1 of the manual for instructions on installing/replacing the batteries. If none of these steps resolve the issue, it is recommended to contact your OMRON retail outlet or distributor for further assistance. Please note that these troubleshooting steps are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
To use the memory function of the Omron M3W Wide Cuff sphygmomanometer, follow these steps: 1. Press the button to view the average value on the screen. 2. Select your USER ID (A or B) using the or button. 3. To view the readings stored in memory, press the or button. The newest set of readings will be numbered as "1". 4. Use the or button to navigate through the readings. Press to view older readings and to view more recent readings. 5. To delete all the values stored in memory for a specific user, first press the button. Then, while holding it down, press the O/I START button simultaneously for about 2-3 seconds. 6. Please note that it is not possible to partially delete values stored in memory. All values for the selected user will be deleted. These steps allow you to view and manage the readings stored in the memory of the Omron M3W Wide Cuff sphygmomanometer. Please note that these instructions are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
There could be several reasons why the memory function of the Omron M3W Wide Cuff sphygmomanometer is not working. Here are the possible causes and their corresponding remedies: 1. No readings stored in memory: If you have not taken any blood pressure readings, there will be no values stored in memory. Ensure that you have taken at least one reading before expecting to see any stored values. 2. Incorrect user selection: Make sure you have selected the correct user (USER A or USER B) to view the stored readings. Use the or button to switch between users and check if the readings appear. 3. Memory full: If the memory is full, the device may not be able to store any more readings. Delete older readings to free up space for new ones. Refer to the manual for instructions on how to delete readings from memory. 4. Battery power low: Check the battery level and replace the batteries if necessary. Low battery power can affect the memory function. If none of these steps resolve the issue, it is recommended to contact your OMRON retail outlet or distributor for further assistance. Please note that these troubleshooting steps are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
To troubleshoot issues with the Omron M3W Wide Cuff sphygmomanometer, follow these steps: 1. Check the batteries: If nothing happens when you press the buttons, the batteries may be empty. Replace them with new ones according to the instructions in section 2.1 of the manual. 2. Ensure correct battery insertion: If the batteries have been inserted incorrectly, the device may not function properly. Make sure to insert the batteries with the correct polarity (+/-) as indicated in section 2.1 of the manual. 3. Repeat the measurement: If the problem persists, press the O/I START button and repeat the measurement. Sometimes, this can resolve the issue. 4. Replace batteries: If the problem continues, try replacing the batteries with new ones. 5. Contact OMRON support: If none of the above steps solve the problem, it is recommended to contact your OMRON retail outlet or distributor for further assistance. Please note that these troubleshooting steps are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
To clean and maintain the Omron M3W Wide Cuff sphygmomanometer, follow these steps: 1. Cleaning the main unit: Use a soft, dry cloth to clean the main unit. Do not use volatile liquids or immerse it in water. Avoid subjecting the unit to extreme temperatures, humidity, moisture, or direct sunlight. 2. Cleaning the arm cuff: Use a soft, moistened cloth and soap to clean the arm cuff. Do not use petrol, thinners, or similar solvents. Avoid folding the cuff or tubing tightly. 3. Storage: When not in use, keep the unit in its storage case. Unplug the air tube from the air connector and gently fold the air tube into the arm cuff. Avoid bending the air tube excessively. Do not store the unit in wet conditions or locations exposed to extreme temperatures, humidity, direct sunlight, dust, corrosive vapors, vibrations, shocks, or at an angle. 4. Calibration and service: It is generally recommended to have the unit inspected every two years to ensure correct functioning and accuracy. Consult your authorized OMRON dealer or OMRON Customer Service for calibration and service. Please note that these instructions are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
The technical specifications of the Omron M3W Wide Cuff sphygmomanometer are as follows: - Compliance: The device fulfills the provisions of EC directive 93/42/EEC (Medical Device Directive). - Design: The blood pressure monitor is designed according to the European Standard EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and Part 3: Supplementary requirements for electromechanical blood pressure measuring systems. - Quality System: The Omron M3W is produced under the strict quality system of Omron Healthcare Co. Ltd., Japan. The core component, the Pressure Sensor, is produced in Japan. - Electro Magnetic Compatibility (EMC): The device conforms to the EN60601-1-2:2007 standard for both immunity and emissions. This standard regulates the requirements for EMC to prevent unsafe product situations caused by electromagnetic interference. - Disposal: The device should not be disposed of with other household wastes. It should be separated and recycled responsibly to promote the sustainable reuse of material resources. Please note that these specifications are specific to the Omron M3W Wide Cuff sphygmomanometer and may not apply to other models or brands.
Yes, the manual of the Omron M3W Wide Cuff is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Omron and is the answer not in the manual?
Question and answer
Number of questions: 0