OCZ e84 PCI-E SSD

OCZ e84 PCI-E SSD manual

(1)
  • 1. Locate the 4-pin molex power connector
    from your power supply.
    2. Plug the power connector into your
    Z-Drive
    3. Locate an x8 or x16 PCI-Express slot and
    carefully seat the drive. Be sure you have
    consulted the motherboard compatibility
    guidelines before installing the Z-Drive.
    The motherboard compatibility guideline
    is available online at
    www.ocztechnology.com.
    4. To set the Z-Drive as your primary boot device, you must first
    define in the BIOS. It will appear as a SCSI “LUN0 LSI LOGIC”
    drive.
    If you are using your Z-Drive in a pre-Vista Service Pack 2, you may need to install the appropriate
    drivers. Drivers are available online at www.ocztechnology.com
    Z-DRIVE QUICKSTART GUIDE
OCZ e84 PCI-E SSD

Need help?

Number of questions: 0

Do you have a question about the OCZ e84 PCI-E SSD or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other OCZ e84 PCI-E SSD owners to properly answer your question.

View the manual for the OCZ e84 PCI-E SSD here, for free. This manual comes under the category Computer Accessories and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the OCZ e84 PCI-E SSD or do you need help? Ask your question here