Numark NVII manual

Numark NVII
8.6 · 10
PDF manual
 · 92 pages
English
manualNumark NVII
26
30. Automático / Regreso: Este botón de modo de pad cambia los pads entre dos modos:
Loop automático y loop con regreso. Cuando el botón está apagado, la primera
pulsación selecciona siempre el modo de loop automático.
Nota: Estas disposiciones de pads coinciden con el esquema de división de tiempo de
loop automático por defecto. Si desplaza el rango de divisiones de tiempo mostrado en
el software, la disposición del pad cambia para coincidir con él.
Modo de loop automático: Cada pad dispara o libera un loop automático de una
longitud diferente. Mantenga pulsado Shift y pulse el botón Parameter <
(Parámetro <) o Parameter > (Parámetro >) para desplazar el loop automático hacia
atrás o adelante.
Modo de loop con regreso: Cada pad dispara un loop con regreso momentáneo.
Pulse el botón Parameter < (Parámetro <) o Parameter > (Parámetro >) para
cambiar la división de tiempo del loop con regreso.
31. Loop (Bucle): Este botón de modo de pad alterna los pads entre dos bancos de loops
guardados y controles de loop. Cuando el botón está apagado, la primera pulsación
selecciona siempre el primer banco.
Modo Loop guardado: Los pads 1-4 (la fila superior) hacen que la pista vuelva a
uno de sus loops guardados. Puede crear y guardar un loop utilizando los pads 5-8
(la fila inferior). Las disposiciones de pads de los dos bancos son idénticas.
o Para crear un loop, pulse el pad 5 para establecer el punto de entrada del
loop, y a continuación pulse el pad 6 para establecer el punto de salida y
dispare el loop.
o Para guardar un loop, mientras está activo, pulse cualquiera de los pads 1-4
(la fila superior) que no tenga un loop asignado. Puede hacer esto
independientemente de la forma en la que se creó el loop (modo Loop
guardado, modo Loop automático, modo Loop con regreso, etc.).
o Para disparar un loop guardado, pulse cualquiera de los pads 1-4 (la fila
superior) que tenga un loop guardado. Pulse el pad 7 para activar o desactivar
el loop. Pulse el pad 8 para que la pista vuelva al último loop disparado y lo
reactive ("repetición de loop").
o Para eliminar un loop guardado, mantenga pulsado Shift y presione el pad
correspondiente (de los pads 1-4).
o Para duplicar o dividir a la mitad la longitud de un loop, pulse el botón
Parameter < (Parámetro <) o Parameter > (Parámetro >).
o Para desplazar un loop hacia adelante o hacia atrás, mantenga pulsado
Shift y pulse el botón Parameter < (Parámetro <) o Parameter > (Parámetro
>).
Loop 1
Loop 2
Loop 3
Loop 4
Entrada del
loop
Salida del
loop
Activar /
desactivar
loop
Repetición
de loop
1/8 beat
1/4 beat
1/2 beat
1 beat
2 beat
4 beat
8 beat
16 beat

Manual

View the manual for the Numark NVII here, for free. This manual comes under the category DJ gear and has been rated by 10 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Numark NVII or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Numark and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
V
ViktorAugust 30, 2023

Hello, I need your help. I accidentally connected a different power cable to my Numark NV mixer. The console turned on fine, but the displays were very bright. So I turned it off and left it overnight. Today, I turned it on with the correct cable and it is doing this to me. Do you know what might be wrong?

This message has been automatically translated

Numark NVII specifications

Below you will find the product specifications and the manual specifications of the Numark NVII.

The Numark NVII is a DJ gear that offers a range of features suitable for professional DJs. It is designed to provide a reliable and user-friendly experience for DJs of all skill levels. This DJ controller is equipped with a built-in display that allows users to easily navigate and control their music library. It also features touch-sensitive knobs and performance pads for intuitive and precise control over various DJ functionalities. The Numark NVII offers a wide range of connectivity options, including USB, RCA, and XLR. It also includes a microphone input and headphone output, allowing DJs to mix and monitor their audio seamlessly. This DJ gear is compatible with both Mac and PC operating systems, enabling DJs to seamlessly integrate it into their existing setup. In terms of performance, the Numark NVII boasts high-quality audio output and a responsive touch-sensitive platter that allows for seamless scratching and mixing. It also features 16 backlit performance pads, which can be used for triggering samples, loops, and cue points. Additionally, the Numark NVII includes professional-grade crossfaders and EQ controls, providing DJs with precise control over their mixes. The compact and portable design of this DJ gear makes it suitable for both home and professional use. Overall, the Numark NVII is a reliable and versatile DJ gear that offers a range of features and connectivity options. It is an ideal choice for DJs looking for a user-friendly and high-performance controller to enhance their mixing and scratching capabilities.

General
BrandNumark
ModelNVII | NVII
ProductDJ gear
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Numark NVII below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

How do I connect my Numark NVII to my laptop?

To connect your Numark NVII to your laptop, use the included USB cable to connect the USB port on the back of the NVII to a USB port on your laptop. Ensure that you have the proper drivers installed on your computer for a seamless connection.

How do I adjust the crossfader curve on the Numark NVII?

To adjust the crossfader curve on the Numark NVII, press and hold the SHIFT button, then press the RIGHT DECK FILTER button. Use the PARAMETER knob to navigate through the menu options, selecting "Crossfader Curve." Rotate the PARAMETER knob to choose your desired curve setting.

How can I assign effects to the touch-capacitive knobs on the Numark NVII?

You can assign effects to the touch-capacitive knobs on the Numark NVII by entering the FX Mode. Press the FX SELECT button to access the effects section. Use the PARAMETER knob to scroll through the available effects, and press the respective knob to enable/disable the selected effect.

How do I adjust the pitch range on the Numark NVII?

To adjust the pitch range on the Numark NVII, press and hold the SHIFT button, then press the PITCH BEND + or - buttons. Use the PARAMETER knob to select your desired pitch range, which can be set to ±8%, ±16%, or ±50%.

How do I update the firmware on my Numark NVII?

To update the firmware on your Numark NVII, visit the official Numark website and navigate to the NVII product page. Look for the "Downloads" or "Support" section and locate the latest firmware update file specifically for the NVII. Follow the provided instructions carefully to successfully update the firmware.

Is the manual of the Numark NVII available in English?

Yes, the manual of the Numark NVII is available in English .

Is your question not listed? Ask your question here

No results