Numark NVII manual

Numark NVII
8.6 · 10
PDF manual
 · 92 pages
English
manualNumark NVII
13

Effects Controls

49. FX 1, FX 2, FX 3: These buttons have different functions on each Deck depending on the
current FX Mode: Single-FX Mode or Multi-FX Mode.
Single-FX Mode: FX 1 activates or deactivates the effect; FX 2 activates or
deactivates the first effect parameter (if applicable); FX 3 activates or deactivates the
second effect parameter (if applicable). Press and hold Shift and press FX 1 to
select the desired effect. Alternatively, press and hold Shift and then turn the FX
Knob under the effect name to move quickly through the list.
Multi-FX Mode: The buttons activate or deactivate the first, second, and third
effects in the effects chain, respectively. Press and hold Shift and press one of the
buttons to select the effect for that point in the effects chain. Alternatively, press and
hold Shift and then turn the FX Knob under the effect name to move quickly
through the list.
50. FX 1 Knob, FX 2 Knob, FX 3 Knob: These knobs have different functions on each Deck
depending on the current FX Mode: Single-FX Mode or Multi-FX Mode
Single-FX Mode: the FX 1 Knob controls the "wet-dry" balance of the effect; the FX
2 Knob controls the first effect parameter; the FX 3 Knob controls the second effect
parameter. When Touch Mode is activated, touch the FX 1 Knob to activate its
effect, and release the knob to deactivate it.
Multi-FX Mode: The knobs control the "wet-dry" balance of the first, second, and
third effects in the effects chain, respectively. When Touch Mode is activated, touch
a knob to activate its effect, and release the knob to deactivate it.
51. Beat / Mode: Tap this button repeatedly at the desired tempo to set the rate of the
effects' low-frequency oscillators (LFOs). Press and hold this button to reset Beat
Multiplier to the Deck's BPM. Press and hold Shift and then press this button to switch
between Single-FX Mode and Multi-FX Mode.
52. Beat Knob: Turn this knob to set the Time Division for the selected effects.
53. FX Assign: Use these buttons to apply Effect A and/or B to the corresponding channel.
You can apply Effect A and/or B to the entire Program Mix by using the FX Send buttons
below the Master Volume kn
ob
. (Each effect can be applied to any or all of the four
channels and/or the Program Mix.)
54. Channel Filter: Turn this knob to adjust the filter on the corresponding channel. The type
of filter it adjusts will depend on the Filter Mode button.
55. Filter Mode: Press this button to toggle through the Filter Modes, which affect the
Channel Filter knobs: Off, Filter-Roll Mode, or Filter-FX Mode.
Off: When this button is off, the Channel Filter knob will apply and adjust a low-
pass filter to the corresponding channel when turned counter-clockwise or a high-
pass filter when turned clockwise.
Filter-Roll Mode: Press this button once to activate Filter-Roll Mode (the button will
light solid red). The Channel Filter knob will apply and adjust a low-pass filter to the
corresponding channel when turned counter-clockwise or a high-pass filter when
turned clockwise. In addition, it will apply a Loop Roll to the filter and will decrease
in length as the knob moves further away from the center position. Press this button
once to deactivate Filter-Roll Mode.
Filter-FX Mode: Press and hold Shift and then press this button to activate Filter-FX
Mode (the button will flash red). The Channel Filter knob will apply and adjust a
low-pass filter to the corresponding channel when turned counter-clockwise or a
high-pass filter when turned clockwise. In addition, it will adjust Parameter 1 of the
effects applied to that channel as the knob moves further away from the center
position. Press this button once to deactivate Filter-FX Mode.

Manual

View the manual for the Numark NVII here, for free. This manual comes under the category DJ gear and has been rated by 10 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Numark NVII or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Numark and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
V
ViktorAugust 30, 2023

Hello, I need your help. I accidentally connected a different power cable to my Numark NV mixer. The console turned on fine, but the displays were very bright. So I turned it off and left it overnight. Today, I turned it on with the correct cable and it is doing this to me. Do you know what might be wrong?

This message has been automatically translated

Numark NVII specifications

Below you will find the product specifications and the manual specifications of the Numark NVII.

The Numark NVII is a DJ gear that offers a range of features suitable for professional DJs. It is designed to provide a reliable and user-friendly experience for DJs of all skill levels. This DJ controller is equipped with a built-in display that allows users to easily navigate and control their music library. It also features touch-sensitive knobs and performance pads for intuitive and precise control over various DJ functionalities. The Numark NVII offers a wide range of connectivity options, including USB, RCA, and XLR. It also includes a microphone input and headphone output, allowing DJs to mix and monitor their audio seamlessly. This DJ gear is compatible with both Mac and PC operating systems, enabling DJs to seamlessly integrate it into their existing setup. In terms of performance, the Numark NVII boasts high-quality audio output and a responsive touch-sensitive platter that allows for seamless scratching and mixing. It also features 16 backlit performance pads, which can be used for triggering samples, loops, and cue points. Additionally, the Numark NVII includes professional-grade crossfaders and EQ controls, providing DJs with precise control over their mixes. The compact and portable design of this DJ gear makes it suitable for both home and professional use. Overall, the Numark NVII is a reliable and versatile DJ gear that offers a range of features and connectivity options. It is an ideal choice for DJs looking for a user-friendly and high-performance controller to enhance their mixing and scratching capabilities.

General
BrandNumark
ModelNVII | NVII
ProductDJ gear
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Numark NVII below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

How do I connect my Numark NVII to my laptop?

To connect your Numark NVII to your laptop, use the included USB cable to connect the USB port on the back of the NVII to a USB port on your laptop. Ensure that you have the proper drivers installed on your computer for a seamless connection.

How do I adjust the crossfader curve on the Numark NVII?

To adjust the crossfader curve on the Numark NVII, press and hold the SHIFT button, then press the RIGHT DECK FILTER button. Use the PARAMETER knob to navigate through the menu options, selecting "Crossfader Curve." Rotate the PARAMETER knob to choose your desired curve setting.

How can I assign effects to the touch-capacitive knobs on the Numark NVII?

You can assign effects to the touch-capacitive knobs on the Numark NVII by entering the FX Mode. Press the FX SELECT button to access the effects section. Use the PARAMETER knob to scroll through the available effects, and press the respective knob to enable/disable the selected effect.

How do I adjust the pitch range on the Numark NVII?

To adjust the pitch range on the Numark NVII, press and hold the SHIFT button, then press the PITCH BEND + or - buttons. Use the PARAMETER knob to select your desired pitch range, which can be set to ±8%, ±16%, or ±50%.

How do I update the firmware on my Numark NVII?

To update the firmware on your Numark NVII, visit the official Numark website and navigate to the NVII product page. Look for the "Downloads" or "Support" section and locate the latest firmware update file specifically for the NVII. Follow the provided instructions carefully to successfully update the firmware.

Is the manual of the Numark NVII available in English?

Yes, the manual of the Numark NVII is available in English .

Is your question not listed? Ask your question here

No results