Nikon MH-65 manual

Nikon MH-65
7 · 1
PDF manual
 · 242 pages
English
manualNikon MH-65
Technical Notes and Index
F2
Technical Notes and Index

Caring for the Products

The Camera

To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.
Be sure to read and follow the warnings of “For Your Safety” (Avi to viii) and
“<Important> Shockproof, waterproof, dustproof, condensation, GPS/digital
compass“ (Axi to xvi) thoroughly before using the products.

B Do Not Allow Damp to Enter Inside the Camera

COOLPIX AW100 is provided with JIS/IEC protection class 8 (IPX8) equivalent waterproofing. If water
seeps inside the camera, however, this could cause the components to rust and result in a high
repair charge or the camera may not be repairable. After using the camera at the beach or
underwater, make sure that the battery-chamber/memory card slot cover is firmly closed, and then
immerse the camera in a shallow container filled with freshwater for ten minutes. After using the
camera underwater, do not leave the camera wet for 60 minutes or more. This could cause
deterioration of the waterproofing performance.

B Prevent Water From Seeping Inside the Camera

If the inside of the camera becomes wet, this could result in camera malfunction and the camera
may not be repairable. To prevent water seeping (water submersion) accidents, be sure to observe
the following cautions when using the camera.
When the battery-chamber/memory card slot cover is closed, make sure that the camera strap,
hair, lint, dust, sand grains, other foreign substances, or dirt are not attached on the waterproofing
packing and portions that make a contact with the waterproofing packing.
Do not open and close the battery-chamber/memory card slot cover in areas exposed to water
spray, high winds, dust or sand.
When an external force is applied on the camera, it could become deformed or the airtight seals
may become damaged and cause water to seep inside the camera. Do not place a heavy object
on the camera, drop the camera, or apply excessive force on the camera.
If water seeps inside the camera, immediately stop using the camera. Wipe off moisture from the
camera, and at once take the camera to your Nikon-authorized service representative.

B Shock and Vibration

Do not drop the camera, strike it against a hard object such as a rock, or throw it at a water surface.
Do not leave the camera in an area subject to vibration. If the camera is subjected to excessive shock,
this could result in camera malfunction or damage.

B Maximum Depth

COOLPIX AW100 is designed to withstand water pressure up to a depth of 10 m (33 ft) for
approximately 60 minutes. At greater depth, water could seep inside the camera, resulting in camera
malfunction.
B Precautions on Handling the Camera in Cold Locations
The operation of this camera has been confirmed at temperatures of –10°C (14°F). If the camera is
left with snow or water droplets adhered to the exterior, snow or water droplets between the gaps
may become frozen and it may be difficult to operate parts of the camera.

View the manual for the Nikon MH-65 here, for free. This manual comes under the category chargers for mobile devices and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Nikon MH-65 or do you need help? Ask your question here

Need help?

Do you have a question about the Nikon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Nikon MH-65 is a charger designed specifically for mobile devices. With an output voltage of 240V, this charger is capable of providing a reliable source of power for your mobile devices. This charger is created with the intention of being portable and easy to use. Its compact size ensures that it is easily transportable, allowing you to conveniently charge your mobile devices on the go. The Nikon MH-65 is constructed with premium materials to ensure its longevity and durability. This ensures that the charger will be able to withstand regular use without compromising its functionality. This charger is designed to be compatible with a wide range of mobile devices, making it a versatile option for users who may have multiple devices from different brands. The design of the Nikon MH-65 takes into consideration the safety of the user and the device being charged. It is equipped with safety features to prevent overheating and overcharging, ensuring that your mobile devices are protected during the charging process. In conclusion, the Nikon MH-65 is a reliable and versatile charger for mobile devices. With its compact size, premium construction, and compatibility with various devices, it provides users with a convenient and efficient method of charging their mobile devices. Its safety features also give users peace of mind during the charging process.

General
BrandNikon
ModelMH-65 | VEA004EA
Productcharger for mobile device
EAN0182089158978
LanguageEnglish
FiletypeUser manual (PDF)
Power
Output voltage240 V
Design
Product colorBlack
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Nikon MH-65 below.

Is the output voltage of the Nikon MH-65 charger suitable for charging mobile devices?

No, the output voltage of 240V is too high for charging mobile devices. Most mobile devices require an output voltage of 5V, so the Nikon MH-65 charger would not be compatible.

How does the output voltage of the Nikon MH-65 charger compare to other chargers on the market?

The output voltage of 240V for the Nikon MH-65 charger is significantly higher than the standard 5V output for most chargers on the market. This makes it incompatible with most mobile devices and would not be a suitable option for users.

How do I know if the Nikon MH-65 charger is compatible with my mobile device?

To determine if the Nikon MH-65 charger is compatible with your mobile device, follow these steps: 1. Check the charging port of your mobile device. The Nikon MH-65 charger is designed to work with specific charging ports, such as micro USB or USB-C. Make sure your mobile device has a compatible charging port. 2. Verify the voltage and current requirements of your mobile device. The Nikon MH-65 charger should provide the appropriate voltage and current output to charge your device safely and efficiently. You can find this information in the user manual or specifications of your mobile device. 3. Ensure that the Nikon MH-65 charger supports the charging technology of your mobile device. Some devices may require specific charging technologies, such as Qualcomm Quick Charge or USB Power Delivery. Check if the Nikon MH-65 charger is compatible with these technologies. 4. Consider the charging speed. The Nikon MH-65 charger may have different charging speeds depending on the device. If you need fast charging, make sure the charger supports the required charging speed for your mobile device. 5. If you are unsure about compatibility, consult the user manual or contact Nikon customer support for further assistance. They can provide specific information regarding compatibility with your mobile device. Remember to always use genuine chargers and cables to ensure the safety and performance of your mobile device.

Why is my mobile device not charging when connected to the Nikon MH-65 charger?

When your mobile device is not charging when connected to the Nikon MH-65 charger, there are a few possible reasons and steps you can take to troubleshoot the issue: 1. Check the battery: Ensure that the battery is properly inserted into the device and that it is not damaged or depleted. If the battery is old or no longer holds a charge, consider replacing it with a new EN-EL12 battery. 2. Verify the charger connection: Make sure that the charger is securely connected to both the device and a power source. Check for any loose connections or debris in the charging port that may be obstructing the charging process. 3. Use the correct charger: Ensure that you are using the Nikon MH-65 charger specifically designed for your mobile device. Using incompatible chargers may result in charging issues or damage to the device. 4. Avoid extreme conditions: Do not expose the charger or device to excessive heat, water, or flames, as this can affect the charging process and potentially damage the components. 5. Seek professional assistance: If the above steps do not resolve the issue, it is recommended to contact a Nikon-authorized service representative for further inspection and assistance. Remember to always follow the safety precautions mentioned in the manual to prevent any mishaps or damage to the device or charger.

How long does it take to fully charge a mobile device using the Nikon MH-65 charger?

The Nikon MH-65 charger takes approximately two hours and 30 minutes to fully charge a mobile device. To charge your mobile device using the Nikon MH-65 charger, follow these steps: 1. Connect the power cable to the charger. 2. Slide the battery forward and insert it into the battery charger. 3. Press down on the battery until it locks into place. 4. The CHARGE lamp will start blinking, indicating that the charging process has begun. 5. Wait for approximately two hours and 30 minutes for the charging to complete. 6. Once the charging is complete, the CHARGE lamp will stop blinking. 7. Remove the battery from the charger. 8. Unplug the charger. Please note that these instructions are specific to the Nikon MH-65 charger and may not apply to other chargers. It is important to follow the manufacturer's instructions for your specific charger to ensure proper and safe charging of your mobile device.

Is the manual of the Nikon MH-65 available in English?

Yes, the manual of the Nikon MH-65 is available in English .

Is your question not listed? Ask your question here

No results