Nextbase 312G manual

Nextbase 312G
7.2 · 1
PDF manual
 · 40 pages
English
manualNextbase 312G

TROUBLE SHOOTING (CONTD.)

My iN-CAR CAM shuts down
by itself after a while.
No power to my iN-CAR CAM,
but it works upon my PC.
The SD card in my
iN-CAR CAM cannot be read.
I can't delete files on my
SD card within the
iN-CAR CAM.
The screen blanks after a few
minutes upon my
iN-CAR CAM.
I get the message “Cluster
size wrong. Please format
SD card” on screen.
The battery will not charge.
The battery only last 30
seconds.
The battery only lasts 6
minutes.
I get the message “Card Error”
on screen.
I get the message “Card Full”
on screen.
The AV Out from my
iN-CAR CAM just buzzes on
my TV.
I have turned on 'Parking
Mode' and now can't stop the
recording.
The Dash Cam cannot lock
onto satellite.
PROBLEM SOLUTION
Either the battery has gone flat, or there is no power to the
iN-CAR CAM and the AutoPower Off period has been triggered.
The cigarette power cable is not working. Inspect the fuse in the
Car Power plug. Replacement fuse = 2A 32mm type. If the fuse is
found to be blown, inspect the power cable for damage which may
have caused the fuse blow.
Use a good quality branded SD card between 8GB and 128GB
(Class 10 or UHS type 1) and format the card from within the
Setup menu.
Check to see if these files are 'protected', if so please follow
instructions to 'un-protect'.
The screen saver is set to ON. Change settings to OFF if required.
Default setting is off.
The SD card has been formatted in another device and the
Cluster Size is not compatible. Use the Setup option to re-format
the SD card from within the iN-CAR CAM.
Ensure the iN-CAR CAM is connected to a reliable power source
and that the supplied Car Power Cable is being used, with the
Green LED lit.
The battery will only receive charge when the iN-CAR CAM is
connected to power, please reconnect the car adaptor and leave
the iN-CAR CAM turned on.
Charging takes approximately 90 minutes and a full charge is
indicated when the BLUE (charging) LED goes out.
This is normal, the battery design allows the 'Auto Power Off'
feature to function in event of power loss within the vehicle.
It is not intended as an alternative power source to replace the
supplied car adaptor.
The SD card has become unusable by the iN-CAR CAM.
Remove useful files using your PC and then perform a “FORMAT”
upon the SD card from within iN-CAR CAM the Setup Menu.
The SD card has become full as there may be too many protected
files which will not be deleted to allow for further recording to take
place. Delete unnecessary files or perform a full FORMAT upon the
SD card from within the iN-CAR CAM Setup Menu.
Ensure that the AV cable is correct. Use a stereo 2.5mm jack plug
where the tip is the video and the ring is the audio signal.
Please visit: nextbaseshop.co.uk to purchase the correct
AV Cable (PN: NBDVR-AV-A).
The iN-CAR CAM will start a recording whenever motion is
detected. To turn off Parking Mode firstly shutdown the
iN-CAR CAM and remove the SD card, this will avoid recording
being activated accidentally. Switch the iN-CAR CAM On and
within the Setup Menu, turn off the 'Parking Mode'.
After power on and with the device mounted with clear view of the
sky it may take serveral minutes to find the three satellites required
to achieve a stable signal. Reception can also be affected by
atmospheric conditions and the proximity of buildings / trees
obscuring the sky.
37

Manual

View the manual for the Nextbase 312G here, for free. This manual comes under the category dashcams and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Nextbase 312G or do you need help? Ask your question here

Need help?

Do you have a question about the Nextbase and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Nextbase 312G specifications

Below you will find the product specifications and the manual specifications of the Nextbase 312G.

The Nextbase 312G is a dashcam designed for use in vehicles. It is known for its high-quality video recording capabilities, capturing footage at a resolution of 1080p Full HD. This ensures that all footage is clear and detailed, making it easier to identify important details such as license plate numbers and road signs. The dashcam features a wide-angle lens, providing a broad field of view to capture the entire scene in front of the vehicle. This helps to provide a comprehensive record of any incidents or accidents that may occur while driving. The lens also has a night vision mode, allowing for clear video capture even in low-light conditions. The Nextbase 312G has a built-in GPS system, which records the speed and location of the vehicle at all times. This information can be useful in the event of an accident or dispute, providing an accurate record of the vehicle's movements. In terms of storage, the dashcam uses a microSD card to save recorded footage. It supports cards up to 32GB in size, providing ample storage space for hours of video footage. For playback and easy access to footage, the Nextbase 312G features a 2.7-inch LCD screen. This allows users to quickly review footage on the device itself, without having to transfer it to a computer. Overall, the Nextbase 312G is a reliable and durable dashcam that provides high-quality video recording capabilities. With its wide-angle lens, night vision mode, and built-in GPS system, it is a valuable tool for anyone looking to enhance their safety on the road.

General
BrandNextbase
Model312G
Productdashcam
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Nextbase 312G below.

How often should I reformat the memory card of the Nextbase 312G dashcam for stable performance?

To maintain stable performance of your Nextbase 312G dashcam's memory card, follow these steps: 1. Periodically reformat the memory card every 2-3 weeks to ensure optimal performance. This process wipes all files from the card and prepares it for continued use with your dashcam. 2. Before reformatting, make sure to download any files from the card that you want to keep, as formatting will erase all content. 3. Format the memory card using the dashcam itself to ensure it is structured specifically for your camera. Access the Format Card option in the MENU and follow the on-screen instructions. 4. Always switch off the dashcam before removing the SD memory card to prevent any potential damage to the card or the files stored on it. Turn off the dashcam before inserting or removing the memory card.

What precautions should I follow before removing or inserting the SD memory card in the dashcam?

1. Before removing or inserting the SD memory card in your Nextbase 312G dashcam, ensure that the dashcam is turned off to prevent any damage to the memory card. 2. Use a suitable MicroSD card (Class 10 48Mbps) and insert it into the dashcam with the gold contacts facing towards the LCD screen side. 3. Push the memory card until it clicks into place, and if needed, use the edge of a small coin to secure it. 4. Remove the dust cover located on the top of the dashcam by sliding it away from the LCD screen to access the mounting point. 5. If the dashcam is not in use for a period, replace the dust cover to protect the metal contacts from dust or contaminants.

Is the manual of the Nextbase 312G available in English?

Yes, the manual of the Nextbase 312G is available in English .

Is your question not listed? Ask your question here

No results