Netgear Nighthawk X10 R9000 manual

Netgear Nighthawk X10 R9000
9.2 · 2
PDF manual
 · 163 pages
English
manualNetgear Nighthawk X10 R9000
When you connect the USB storage device to the router's USB port, it might take up to two minutes
before it is ready for sharing. By default, the USB storage device is available to all computers on your
local area network (LAN).
3. Download ReadySHARE Vault from netgear.com/readyshare and install it on each Windows computer.
4. Launch ReadySHARE Vault.
5. Use the dashboard or the Backup tab to set up and run your backup.

Back Up Mac Computers With Time Machine

You can use Time Machine to back up your Mac computers onto a USB hard drive that is connected to one
of the router’s USB ports.You can access the connected storage device from your Mac with a wired or WiFi
connection to your router.

Set Up a USB Hard Drive on a Mac

We recommend that you use a new USB HDD or format your old USB HDD to do the Time Machine backup
for the first time. Use a blank partition to prevent some issues during backup using Time Machine.The router
supports GUID or MBR partitions.

To format your USB hard disk drive and specify partitions:

1. Physically connect the USB hard drive to your router.
2. On your Mac, go to Spotlight (or the magnifying glass) at the top right of the page and search for Disk
Utility.
3. Open the Disk Utility, select your USB HDD, click the Erase tab, and click the Erase button.
4. Click the Partition tab.
5. In the Partition Layout menu, set the number of partitions that you want to use.
6. Click the Options button.
The Partition schemes display.
7. Select the GUID Partition Table or Master Boot Record radio button.
8. In the Format menu, select Mac OS Extended (Journaled).
9. Click the OK button.
10. Click the Apply button.
Your settings are saved.

Prepare to Back Up a Large Amount of Data

Before you back up a large amount of data with Time Machine, NETGEAR recommends that you follow this
procedure.

Share USB Storage Devices Attached to the Router

98

Nighthawk X10 AD7200 Smart WiFi Router

Manual

View the manual for the Netgear Nighthawk X10 R9000 here, for free. This manual comes under the category routers and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Netgear Nighthawk X10 R9000 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Netgear and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Netgear Nighthawk X10 R9000 specifications

Below you will find the product specifications and the manual specifications of the Netgear Nighthawk X10 R9000.

The Netgear Nighthawk X10 R9000 is a tabletop router that offers high-speed wireless connectivity. It is equipped with an Ethernet WAN port but does not support DSL WAN or SIM card slots, making it unsuitable for certain types of internet connections like DSL or mobile networks. Additionally, it is not compatible with 3G or 4G USB modems. One of the notable features of the Netgear Nighthawk X10 R9000 is its support for the top Wi-Fi standard, 802.11ad, which allows for extremely fast data transfer rates. The router offers a maximum WLAN data transfer rate of 4600 Mbit/s, with different bands providing varying transfer rates. The first band can transfer data at up to 800 Mbit/s, the second band at up to 1733 Mbit/s, and the third band at the maximum rate of 4600 Mbit/s. In terms of design, the Nighthawk X10 R9000 features an indication light and an on/off switch for convenience. The router is built with quality materials to ensure reliability and durability over time. Overall, the Netgear Nighthawk X10 R9000 is a capable tabletop router that provides high-speed wireless connectivity. Its support for the 802.11ad Wi-Fi standard and its impressive data transfer rates make it suitable for users who require fast and reliable internet connections. However, it is important to note that it may not be suitable for all types of internet connections due to the lack of DSL WAN and SIM card slot compatibility.

General
BrandNetgear
ModelNighthawk X10 R9000 | R9000-100NAS
Productrouter
EAN0606449114652
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Datasheet (PDF)
WAN connection
Ethernet WANYes
DSL WANNo
SIM card slotNo
3G/4G USB modem compatibilityNo
WAN connection typeRJ-45
Wireless LAN features
Wi-Fi bandTri-band (2.4 GHz / 5 GHz / 60 GHz)
Top Wi-Fi standard802.11ad
WLAN data transfer rate (max)4600 Mbit/s
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11ad
WLAN data transfer rate (first band)800 Mbit/s
WLAN data transfer rate (second band)1733 Mbit/s
WLAN data transfer rate (third band)4600 Mbit/s
Design
Product typeTabletop router
Product colorBlack
Indication lightYes
On/off switchYes
Network
Ethernet LANYes
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac, IEEE 802.11ad
Features
Built-in processorYes
Processor frequency1700 MHz
Processor cores4
Intel insideYes
Ports & interfaces
Memory card slot(s)-
USB portYes
Ethernet LAN (RJ-45) ports6
DC-in jackYes
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Power
Power source typeDC
Mobile network
3GNo
4GNo
Weight & dimensions
Width224 mm
Depth168 mm
Height74 mm
Weight1865 g
Packaging content
AC adapter includedYes
Cables includedLAN (RJ-45)
Quick start guideYes
Antenna
External
Antennas quantity4
Security
Security algorithmsWPA, WPA2, WPA2-PSK
DoS attack preventionYes
FirewallYes
Network address translation (NAT)Yes
Stateful Packet Inspection (SPI)Yes
System requirements
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Linux operating systems supportedYes
Mac compatibilityYes
Protocols
Supported network protocolsIPv6
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Netgear Nighthawk X10 R9000 below.

What is the difference between a router and a modem?

A modem provides the internet connection via the internet provider. A router then distributes the Internet signal to the devices connected to the router.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

Is WIFI radiation harmful?

WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health.

What is the weight of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a weight of 1865 g.

What is the height of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a height of 74 mm.

What is the width of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a width of 224 mm.

What is the depth of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a depth of 168 mm.

Why is the router not connecting to the internet?

Firstly, check all cable connections to ensure they are secure. Power cycling the modem and router can also help resolve connectivity issues. Verify that your ISP credentials are correctly entered in the router settings. Additionally, ensure that the router firmware is up to date.

How can I improve the Wi-Fi signal strength?

Adjust the position of the router to a central location in your home, away from physical barriers or interference sources. Also, avoid placing it near other electronic devices or appliances that may cause signal interference. Consider using Wi-Fi range extenders or mesh systems to expand coverage if needed.

How to set up a guest network on my Nighthawk X10 router?

Open the router settings and navigate to the "Guest Network" section. Enable the guest network and set a secure password. You can customize the network name (SSID) and configure additional settings like network speed restrictions or time limits if desired.

How can I prioritize certain devices or applications for better performance?

Access the router settings and locate the Quality of Service (QoS) section. Enable QoS and choose between manual or automatic settings. You can assign priority levels to specific devices or applications by defining their MAC addresses or using the built-in application database.

How to enable remote access to my router settings?

Within the router settings, go to the "Remote Management" section. Enable remote management and set a secure password. Make sure to use a strong password to prevent unauthorized access. Remember to be cautious when enabling remote access, as it poses potential security risks.

Does the Netgear Nighthawk X10 R9000 have an Ethernet WAN?

Yes, it has an Ethernet WAN. This means that it can be connected to a wired internet source using an Ethernet cable.

Does the Netgear Nighthawk X10 R9000 have a DSL WAN?

No, it does not have a DSL WAN. This means that it cannot be directly connected to a DSL internet source.

Does the Netgear Nighthawk X10 R9000 have a SIM card slot?

No, it does not have a SIM card slot. This means that it cannot be used with a mobile data SIM card.

Does the Netgear Nighthawk X10 R9000 support 3G/4G USB modems?

No, it does not support 3G/4G USB modems. This means that it cannot be used with a USB modem for mobile broadband connectivity.

What is the top Wi-Fi standard supported by the Netgear Nighthawk X10 R9000?

The top Wi-Fi standard supported by the Netgear Nighthawk X10 R9000 is 802.11ad. This is the latest Wi-Fi standard and provides extremely high data transfer rates and low latency.

Is the manual of the Netgear Nighthawk X10 R9000 available in English?

Yes, the manual of the Netgear Nighthawk X10 R9000 is available in English .

Is your question not listed? Ask your question here

No results