Netgear Nighthawk X10 R9000 manual

Netgear Nighthawk X10 R9000
9.2 · 2
PDF manual
 · 163 pages
English
manualNetgear Nighthawk X10 R9000

Troubleshoot Internet Browsing

If your router can obtain an IP address but your computer is unable to load any web pages from the Internet,
it might be for the following reasons:
The traffic meter is enabled, and the limit was reached.
By configuring the traffic meter not to block Internet access when the traffic limit is reached, you can
resume Internet access. If your ISP sets a usage limit, they might charge you for the overage.
Your computer might not recognize any DNS server addresses. A DNS server is a host on the Internet
that translates Internet names (such as www addresses) to numeric IP addresses.
Typically, your ISP provides the addresses of one or two DNS servers for your use. If you entered a
DNS address during the router’s configuration, restart your computer.
Alternatively, you can configure your computer manually with a DNS address, as explained in the
documentation for your computer.
The router might not be configured as the default gateway on your computer.
Reboot the computer and verify that the router address (www.routerlogin.net) is listed by your computer
as the default gateway address.
You might be running login software that is no longer needed. If your ISP provided a program to log you
in to the Internet (such as WinPoET), you no longer need to run that software after installing your router.
You might need to go to Internet Explorer and select Tools > Internet Options, click the Connections
tab, and select the Never dial a connection. Other browsers provide similar options.

Changes Are Not Saved

If the router does not save the changes that you make on the router web pages, do the following:
When entering configuration settings, always click the Apply button before moving to another page or
tab, or your changes are lost.
Click the Refresh or Reload button in the web browser. It is possible that the changes occurred, but
the old settings might be in the web browser’s cache.

Troubleshoot WiFi Connectivity

If you are experiencing trouble connecting over WiFi to the router, try to isolate the problem:
Does the WiFi device or computer that you are using find your WiFi network?
If not, check the WiFi LED on the front of the router. If it is off, you can press the WiFi On/Off button on
the router to turn the router WiFi radios back on.
If you disabled the router’s SSID broadcast, then your WiFi network is hidden and does not display in
your WiFi client’s scanning list. (By default, SSID broadcast is enabled.)
Does your WiFi device support the security that you are using for your WiFi network (WPA or WPA2)?
If you want to view the WiFi settings for the router, use an Ethernet cable to connect a computer to a
LAN port on the router.Then log in to the router, and select BASIC > Wireless.
Be sure to click the Apply button if you change settings.Note

Troubleshooting

157

Nighthawk X10 AD7200 Smart WiFi Router

Manual

View the manual for the Netgear Nighthawk X10 R9000 here, for free. This manual comes under the category routers and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Netgear Nighthawk X10 R9000 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Netgear and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Netgear Nighthawk X10 R9000 specifications

Below you will find the product specifications and the manual specifications of the Netgear Nighthawk X10 R9000.

The Netgear Nighthawk X10 R9000 is a tabletop router that offers high-speed wireless connectivity. It is equipped with an Ethernet WAN port but does not support DSL WAN or SIM card slots, making it unsuitable for certain types of internet connections like DSL or mobile networks. Additionally, it is not compatible with 3G or 4G USB modems. One of the notable features of the Netgear Nighthawk X10 R9000 is its support for the top Wi-Fi standard, 802.11ad, which allows for extremely fast data transfer rates. The router offers a maximum WLAN data transfer rate of 4600 Mbit/s, with different bands providing varying transfer rates. The first band can transfer data at up to 800 Mbit/s, the second band at up to 1733 Mbit/s, and the third band at the maximum rate of 4600 Mbit/s. In terms of design, the Nighthawk X10 R9000 features an indication light and an on/off switch for convenience. The router is built with quality materials to ensure reliability and durability over time. Overall, the Netgear Nighthawk X10 R9000 is a capable tabletop router that provides high-speed wireless connectivity. Its support for the 802.11ad Wi-Fi standard and its impressive data transfer rates make it suitable for users who require fast and reliable internet connections. However, it is important to note that it may not be suitable for all types of internet connections due to the lack of DSL WAN and SIM card slot compatibility.

General
BrandNetgear
ModelNighthawk X10 R9000 | R9000-100NAS
Productrouter
EAN0606449114652
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Datasheet (PDF)
WAN connection
Ethernet WANYes
DSL WANNo
SIM card slotNo
3G/4G USB modem compatibilityNo
WAN connection typeRJ-45
Wireless LAN features
Wi-Fi bandTri-band (2.4 GHz / 5 GHz / 60 GHz)
Top Wi-Fi standard802.11ad
WLAN data transfer rate (max)4600 Mbit/s
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11ad
WLAN data transfer rate (first band)800 Mbit/s
WLAN data transfer rate (second band)1733 Mbit/s
WLAN data transfer rate (third band)4600 Mbit/s
Design
Product typeTabletop router
Product colorBlack
Indication lightYes
On/off switchYes
Network
Ethernet LANYes
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac, IEEE 802.11ad
Features
Built-in processorYes
Processor frequency1700 MHz
Processor cores4
Intel insideYes
Ports & interfaces
Memory card slot(s)-
USB portYes
Ethernet LAN (RJ-45) ports6
DC-in jackYes
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Power
Power source typeDC
Mobile network
3GNo
4GNo
Weight & dimensions
Width224 mm
Depth168 mm
Height74 mm
Weight1865 g
Packaging content
AC adapter includedYes
Cables includedLAN (RJ-45)
Quick start guideYes
Antenna
External
Antennas quantity4
Security
Security algorithmsWPA, WPA2, WPA2-PSK
DoS attack preventionYes
FirewallYes
Network address translation (NAT)Yes
Stateful Packet Inspection (SPI)Yes
System requirements
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Linux operating systems supportedYes
Mac compatibilityYes
Protocols
Supported network protocolsIPv6
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Netgear Nighthawk X10 R9000 below.

What is the difference between a router and a modem?

A modem provides the internet connection via the internet provider. A router then distributes the Internet signal to the devices connected to the router.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

Is WIFI radiation harmful?

WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health.

What is the weight of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a weight of 1865 g.

What is the height of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a height of 74 mm.

What is the width of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a width of 224 mm.

What is the depth of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a depth of 168 mm.

Why is the router not connecting to the internet?

Firstly, check all cable connections to ensure they are secure. Power cycling the modem and router can also help resolve connectivity issues. Verify that your ISP credentials are correctly entered in the router settings. Additionally, ensure that the router firmware is up to date.

How can I improve the Wi-Fi signal strength?

Adjust the position of the router to a central location in your home, away from physical barriers or interference sources. Also, avoid placing it near other electronic devices or appliances that may cause signal interference. Consider using Wi-Fi range extenders or mesh systems to expand coverage if needed.

How to set up a guest network on my Nighthawk X10 router?

Open the router settings and navigate to the "Guest Network" section. Enable the guest network and set a secure password. You can customize the network name (SSID) and configure additional settings like network speed restrictions or time limits if desired.

How can I prioritize certain devices or applications for better performance?

Access the router settings and locate the Quality of Service (QoS) section. Enable QoS and choose between manual or automatic settings. You can assign priority levels to specific devices or applications by defining their MAC addresses or using the built-in application database.

How to enable remote access to my router settings?

Within the router settings, go to the "Remote Management" section. Enable remote management and set a secure password. Make sure to use a strong password to prevent unauthorized access. Remember to be cautious when enabling remote access, as it poses potential security risks.

Does the Netgear Nighthawk X10 R9000 have an Ethernet WAN?

Yes, it has an Ethernet WAN. This means that it can be connected to a wired internet source using an Ethernet cable.

Does the Netgear Nighthawk X10 R9000 have a DSL WAN?

No, it does not have a DSL WAN. This means that it cannot be directly connected to a DSL internet source.

Does the Netgear Nighthawk X10 R9000 have a SIM card slot?

No, it does not have a SIM card slot. This means that it cannot be used with a mobile data SIM card.

Does the Netgear Nighthawk X10 R9000 support 3G/4G USB modems?

No, it does not support 3G/4G USB modems. This means that it cannot be used with a USB modem for mobile broadband connectivity.

What is the top Wi-Fi standard supported by the Netgear Nighthawk X10 R9000?

The top Wi-Fi standard supported by the Netgear Nighthawk X10 R9000 is 802.11ad. This is the latest Wi-Fi standard and provides extremely high data transfer rates and low latency.

Is the manual of the Netgear Nighthawk X10 R9000 available in English?

Yes, the manual of the Netgear Nighthawk X10 R9000 is available in English .

Is your question not listed? Ask your question here

No results