Netgear Nighthawk X10 R9000 manual

Netgear Nighthawk X10 R9000
9.2 · 2
PDF manual
 · 163 pages
English
manualNetgear Nighthawk X10 R9000
When you connect the router’s Internet port to a modem, use the cable that was supplied with the modem.
This cable can be a standard straight-through Ethernet cable or an Ethernet crossover cable.

WiFi LED Is Off

If the WiFi LED stays off, check to see if someone pressed the WiFi On/Off button on the router.This button
turns the WiFi radios in the router on and off.The WiFi LED is lit when the WiFi radios are turned on.

You Cannot Log In to the Router

If you are unable to log in to the router from a computer on your local network, check the following:
If you are using an Ethernet-connected computer, check the Ethernet connection between the computer
and the router.
Make sure that the IP address of your computer is on the same subnet as the router. If you are using
the recommended addressing scheme, your computer’s address is in the range of 192.168.1.2 to
192.168.1.254.
If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate
and assign an IP address if the computer cannot reach a DHCP server.These autogenerated addresses
are in the range of 169.254.x.x. If your IP address is in this range, check the connection from the computer
to the router, and reboot your computer.
If your router’s IP address was changed and you do not know the current IP address, clear the router’s
configuration to factory defaults.This sets the router’s IP address to 192.168.1.1. For more information,
see Factory Settings on page 161.
Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,
click the Refresh button to be sure that the Java applet is loaded.
Try quitting the browser and launching it again.
Make sure that you are using the correct login information.The user name is admin, and the default
password is password. Make sure that Caps Lock is off when you enter this information.
If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your
network, the router cannot perform many gateway services. For example, the router cannot convert
ADSL or cable data into Ethernet networking information. NETGEAR does not support such a
configuration.

You Cannot Access the Internet

If you can access your router but not the Internet, check to see if the router can obtain an IP address from
your Internet service provider (ISP). Unless your ISP provides a fixed IP address, your router requests an
IP address from the ISP.You can determine whether the request was successful using the ADVANCED
Home page.

To check the WAN IP address:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Select an external site such as netgear.com.
3. Type http://www.routerlogin.net.

Troubleshooting

155

Nighthawk X10 AD7200 Smart WiFi Router

Manual

View the manual for the Netgear Nighthawk X10 R9000 here, for free. This manual comes under the category routers and has been rated by 2 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Netgear Nighthawk X10 R9000 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Netgear and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Netgear Nighthawk X10 R9000 specifications

Below you will find the product specifications and the manual specifications of the Netgear Nighthawk X10 R9000.

The Netgear Nighthawk X10 R9000 is a tabletop router that offers high-speed wireless connectivity. It is equipped with an Ethernet WAN port but does not support DSL WAN or SIM card slots, making it unsuitable for certain types of internet connections like DSL or mobile networks. Additionally, it is not compatible with 3G or 4G USB modems. One of the notable features of the Netgear Nighthawk X10 R9000 is its support for the top Wi-Fi standard, 802.11ad, which allows for extremely fast data transfer rates. The router offers a maximum WLAN data transfer rate of 4600 Mbit/s, with different bands providing varying transfer rates. The first band can transfer data at up to 800 Mbit/s, the second band at up to 1733 Mbit/s, and the third band at the maximum rate of 4600 Mbit/s. In terms of design, the Nighthawk X10 R9000 features an indication light and an on/off switch for convenience. The router is built with quality materials to ensure reliability and durability over time. Overall, the Netgear Nighthawk X10 R9000 is a capable tabletop router that provides high-speed wireless connectivity. Its support for the 802.11ad Wi-Fi standard and its impressive data transfer rates make it suitable for users who require fast and reliable internet connections. However, it is important to note that it may not be suitable for all types of internet connections due to the lack of DSL WAN and SIM card slot compatibility.

General
BrandNetgear
ModelNighthawk X10 R9000 | R9000-100NAS
Productrouter
EAN0606449114652
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Datasheet (PDF)
WAN connection
Ethernet WANYes
DSL WANNo
SIM card slotNo
3G/4G USB modem compatibilityNo
WAN connection typeRJ-45
Wireless LAN features
Wi-Fi bandTri-band (2.4 GHz / 5 GHz / 60 GHz)
Top Wi-Fi standard802.11ad
WLAN data transfer rate (max)4600 Mbit/s
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11ad
WLAN data transfer rate (first band)800 Mbit/s
WLAN data transfer rate (second band)1733 Mbit/s
WLAN data transfer rate (third band)4600 Mbit/s
Design
Product typeTabletop router
Product colorBlack
Indication lightYes
On/off switchYes
Network
Ethernet LANYes
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac, IEEE 802.11ad
Features
Built-in processorYes
Processor frequency1700 MHz
Processor cores4
Intel insideYes
Ports & interfaces
Memory card slot(s)-
USB portYes
Ethernet LAN (RJ-45) ports6
DC-in jackYes
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Power
Power source typeDC
Mobile network
3GNo
4GNo
Weight & dimensions
Width224 mm
Depth168 mm
Height74 mm
Weight1865 g
Packaging content
AC adapter includedYes
Cables includedLAN (RJ-45)
Quick start guideYes
Antenna
External
Antennas quantity4
Security
Security algorithmsWPA, WPA2, WPA2-PSK
DoS attack preventionYes
FirewallYes
Network address translation (NAT)Yes
Stateful Packet Inspection (SPI)Yes
System requirements
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Linux operating systems supportedYes
Mac compatibilityYes
Protocols
Supported network protocolsIPv6
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Netgear Nighthawk X10 R9000 below.

What is the difference between a router and a modem?

A modem provides the internet connection via the internet provider. A router then distributes the Internet signal to the devices connected to the router.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

Is WIFI radiation harmful?

WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health.

What is the weight of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a weight of 1865 g.

What is the height of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a height of 74 mm.

What is the width of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a width of 224 mm.

What is the depth of the Netgear Nighthawk X10 R9000?

The Netgear Nighthawk X10 R9000 has a depth of 168 mm.

Why is the router not connecting to the internet?

Firstly, check all cable connections to ensure they are secure. Power cycling the modem and router can also help resolve connectivity issues. Verify that your ISP credentials are correctly entered in the router settings. Additionally, ensure that the router firmware is up to date.

How can I improve the Wi-Fi signal strength?

Adjust the position of the router to a central location in your home, away from physical barriers or interference sources. Also, avoid placing it near other electronic devices or appliances that may cause signal interference. Consider using Wi-Fi range extenders or mesh systems to expand coverage if needed.

How to set up a guest network on my Nighthawk X10 router?

Open the router settings and navigate to the "Guest Network" section. Enable the guest network and set a secure password. You can customize the network name (SSID) and configure additional settings like network speed restrictions or time limits if desired.

How can I prioritize certain devices or applications for better performance?

Access the router settings and locate the Quality of Service (QoS) section. Enable QoS and choose between manual or automatic settings. You can assign priority levels to specific devices or applications by defining their MAC addresses or using the built-in application database.

How to enable remote access to my router settings?

Within the router settings, go to the "Remote Management" section. Enable remote management and set a secure password. Make sure to use a strong password to prevent unauthorized access. Remember to be cautious when enabling remote access, as it poses potential security risks.

Does the Netgear Nighthawk X10 R9000 have an Ethernet WAN?

Yes, it has an Ethernet WAN. This means that it can be connected to a wired internet source using an Ethernet cable.

Does the Netgear Nighthawk X10 R9000 have a DSL WAN?

No, it does not have a DSL WAN. This means that it cannot be directly connected to a DSL internet source.

Does the Netgear Nighthawk X10 R9000 have a SIM card slot?

No, it does not have a SIM card slot. This means that it cannot be used with a mobile data SIM card.

Does the Netgear Nighthawk X10 R9000 support 3G/4G USB modems?

No, it does not support 3G/4G USB modems. This means that it cannot be used with a USB modem for mobile broadband connectivity.

What is the top Wi-Fi standard supported by the Netgear Nighthawk X10 R9000?

The top Wi-Fi standard supported by the Netgear Nighthawk X10 R9000 is 802.11ad. This is the latest Wi-Fi standard and provides extremely high data transfer rates and low latency.

Is the manual of the Netgear Nighthawk X10 R9000 available in English?

Yes, the manual of the Netgear Nighthawk X10 R9000 is available in English .

Is your question not listed? Ask your question here

No results