71
5. Using On-Screen Menu [OPTIONS(2)] SelectingPower-savingin[STANDBYMODE] The projector has three standby modes: [NORMAL], [NETWORK STANDBY], and [SLEEP].
The NORMAL mode is the mode that allows you to put the projector in the power-saving condition which consumes
less power than the NETWORK STANDBY mode.
NORMAL ������������������������������� When [NORMAL] is selected, only the following buttons and feature will work:
POWER buttons on the projector cabinet and the remote control, AUTO POWER ON, and powering on from
PC Control command�
NETWORK ST ANDBY ��������������When [NETWORK ST ANDBY] is selected, the projector can be turned on over a wired LAN connection and
only the following buttons, port, and features will work:
POWER buttons on the projector cabinet and the remote control, powering on from PC Control command,
AUTO POWER ON, LAN port, wireless LAN unit (optional), operation by User Supportware, LAN feature,
and Mail Alert feature�
SLEEP �����������������������������������Maintain the state of sleep� Consumption power becomes higher than the setting of NORMAL� Select this
mode in the following cases:
• For using the USB-A port constantly.
IMPORT ANT :
• When [NETWORK ST ANDBY] has been set for [ST ANDBYMODE] and the LAN has been in link-do wn condition for 3 minutes, [ST ANDBY
MODE]willtransitinto[NORMAL]automaticallyforthepurposetosavetheconsumptionpo wer .
• When[NETWORKST ANDBY]has beenselected, [AUTOPOWEROFF]becomesineffective(displayedin grey)and[0:15]isselectedauto-
matically .
• Inthebelowconditions,settingofthe[ST ANDBYMODE]isdisabledandtheprojectorwillgointotheSLEEPmode*.
* Sleep mode refersthe mode without functionalrestrictions by the [ST ANDBY MODE]. Power consumption in the SLEEPmode is relatively
higherthanthe[NETWORKST ANDBY]mode. TheStatusindica torturnsoninGreen.
When[ST ANDBYMODE]→ [NETWORKST ANDBY]isselected
- When[NETWORKSERVICE]→ [AMXSETTINGS]→ [ENABLE]isselected
- When[NETWORKSERVICE]→ [CRESTRONSETTINGS]→ [CRESTRONCONTROL]→ [ENABLE]isselected
- When[NETWORKSETTINGS]→ [WIRELESSLAN]→ Exceptfor[DISABLE]andmountingthewirelessLANunittotheprojector .
- WhenthesignalisinputtotheCOMPUTER, HDMI1IN, HDMI2INorUSB-Bterminals
NOTE:
• Evenwhen[NORMAL]isselectedfor[ST ANDBYMODE],poweronoroffcanbedonebyusingthePCCONTROLport.
• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO
2
emission reduction.
• Y oursettingfor[ST ANDBYMODE]willnotbeaffectedevenwhen[RESET]isdonefromthemenu.
Need help?
Do you have a question about the NEC and is the answer not in the manual?
Question and answer
Number of questions: 0