NEC MultiSync EA271Q manual

NEC MultiSync EA271Q
6.7 · 1
PDF manual
 · 39 pages
English
manualNEC MultiSync EA271Q

English-1

English

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT

USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE

PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO

FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.

DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric

shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been

included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is
not supplied with this equipment, please contact NEC. For all other cases, please use the power cord with the plug style that
matches the power socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power

outlet and has been approved by, and complies with, the safety standards in the country of purchase.

This equipment is designed to be used in the condition of the power cord connected to earth. If the power cord is not connected

to the earth, it may cause electric shock. Please make sure the power cord is earthed properly.

Plug Type North America European Continental U.K. Chinese Japanese
Plug Shape
Region
U.S.A./Canada EU U.K. China Japan
Voltage
120* 230 230 220 100
* When operating the monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply

voltage of the AC power outlet being used.

NOTE: This product can only be serviced in the country where it was purchased.

Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.

ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy,

Norway, Spain, Sweden, U.K.

EnErgy Star is a U.S. registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective owners.

As an EnErgy Star

®

Partner, NEC Display Solutions of America, Inc. has determined that this product

meets the EnErgy Star guidelines for energy efficiency. The EnErgy Star emblem does not represent EPA

endorsement of any product or service.

DisplayPort and DisplayPort Compliance Logo are trademarks owned by Video Electronics Standards

Association in the United States and other countries.

HDCP (High-bandwidth Digital Content Protection): HDCP is a system for preventing illegal copying of video

data sent over a digital signal. If you are unable to view material via the digital signal input, this does not

necessarily mean the display is not functioning properly. With the implementation of HDCP, there may be

cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP

community (Digital Content Protection, LLC).

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States

and other countries.

• TheintendedprimaryuseofthisproductisasanInformationTechnicalEquipmentinanofceordomesticenvironment.
• Theproductisintendedtobeconnectedtoacomputerandisnotintendedforthedisplayoftelevisionbroadcastsignals.

Manual

View the manual for the NEC MultiSync EA271Q here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the NEC MultiSync EA271Q or do you need help? Ask your question here

Need help?

Do you have a question about the NEC and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

NEC MultiSync EA271Q specifications

Below you will find the product specifications and the manual specifications of the NEC MultiSync EA271Q.

General
BrandNEC
ModelMultiSync EA271Q | 60004303
Productmonitor
EAN5028695116214
LanguageEnglish
FiletypeUser manual (PDF), Energy label (PDF)
Display
Display diagonal27 "
Display resolution2560 x 1440 pixels
Display brightness (typical)350 cd/m²
Response time6 ms
3DNo
HD typeQuad HD
Display technologyLCD
Panel typePLS
Supported graphics resolutions2560 x 1440
Screen shapeFlat
Pixel pitch0.23 x 0.23 mm
Backlight typeW-LED
Contrast ratio (typical)1000:1
Native aspect ratio16:9
Display number of colors16.78 million colors
Adobe RGB coverage78.3 %
sRGB coverage (typical)100 %
NTSC coverage (typical)74.6 %
Viewable size, horizontal596.74 mm
Viewable size, vertical335.66 mm
Viewing angle, horizontal178 °
Viewing angle, vertical178 °
Horizontal scan range31.5 - 94 kHz
Vertical scan range56 - 75 Hz
DDC/CIYes
Contrast ratio (dynamic)7000:1
Maximum refresh rate60 Hz
TouchscreenNo
Ports & interfaces
Built-in USB hubYes
DisplayPorts quantity2
HDMI ports quantity1
DVI portYes
DVI-D ports quantity1
USB upstream port typeUSB Type-B
USB Type-A downstream ports quantity2
Number of upstream ports1
DisplayPort version1.2
USB Type-C downstream ports quantity1
USB hub version3.2 Gen 1 (3.1 Gen 1)
HDCPYes
VGA (D-Sub) ports quantity0
Power
Power consumption (typical)37 W
Power consumption (PowerSave)0.29 W
Power consumption (max)150 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
E
-
21 kWh
- kWh
Energy efficiency scaleA to G
Weight & dimensions
Bezel width (side)1 mm
Bezel width (bottom)17.7 mm
Bezel width (top)1 mm
Width (without stand)611.8 mm
Depth (without stand)67.2 mm
Height (without stand)361.9 mm
Width (with stand)611.8 mm
Depth (with stand)150 mm
Height (with stand)378 mm
Weight (without stand)5700 g
Weight (with stand)9100 g
Packaging data
Package weight11800 g
Package width730 mm
Package depth217 mm
Package height475 mm
Ergonomics
VESA mountingYes
Panel mounting interface100 x 100 mm
Cable lock slotYes
Height adjustmentYes
Tilt adjustmentYes
SwivelingYes
PivotYes
On Screen Display (OSD)Yes
Plug and PlayYes
Cable lock slot typeKensington
Height adjustment150 mm
Tilt up angle range0 - 35 °
Tilt down angle range0 - 5 °
Pivot angle-90 - 90 °
Swivel angle range0 - 340 °
Other features
On/off switchYes
AC adapter includedYes
TV tuner integratedNo
Operational conditions
Operating temperature (T-T)5 - 35 °C
Storage temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)20 - 80 %
Storage relative humidity (H-H)10 - 85 %
Operating altitude0 - 5000 m
Non-operating altitude5000 - 12192 m
Sustainability
Sustainability certificatesRoHS, ENERGY STAR
391424
Design
CertificationTCP 7.0
Market positioning-
Product colorBlack
Feet colorBlack
Multimedia
Built-in speaker(s)Yes
Built-in cameraNo
Number of speakers2
RMS rated power2 W
Performance
NVIDIA G-SYNCNo
AMD FreeSyncNo
Logistics data
Harmonized System (HS) code85285210
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the NEC MultiSync EA271Q below.

What screen dimensions does my monitor have?

The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

What certifications does the NEC MultiSync EA271Q have?

The NEC MultiSync EA271Q has the following certifications: TCP 7.0.

What is the screen size of the NEC MultiSync EA271Q?

The screen size of the NEC MultiSync EA271Q is 27 ".

What is the screen resolution of the display of the NEC MultiSync EA271Q?

The screen resolution of the NEC MultiSync EA271Q is 2560 x 1440 pixels.

Is the manual of the NEC MultiSync EA271Q available in English?

Yes, the manual of the NEC MultiSync EA271Q is available in English .

Is your question not listed? Ask your question here

No results