View the manual for the NAD T748 here, for free. This manual comes under the category Receivers and has been rated by 4 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the NAD T748 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the NAD T748.
Brand | NAD |
Model | T748 |
Product | Receiver |
EAN | 5703120271484 |
Language | English |
Filetype | Usermanual (PDF) |
Power output per channel (20-20KHz@8 Ohm) | 80 W |
Audio output channels | - channels |
Dynamic power per channel (4 Ohm) | 160 W |
Dynamic power per channel (8 Ohm) | 110 W |
Total Harmonic Distortion (THD) | 0.08 % |
Input sensitivity | 250 mV |
Input impedance | 47000 Ω |
Signal-to-Noise Ratio (SNR) | 100 dB |
Frequency range | 20 - 20000 Hz |
HDMI in | 4 |
Composite video in | 2 |
S-Video inputs quantity | 1 |
Audio (L/R) in | 3 |
Digital audio optical in | 2 |
Remote (IR) input | 1 |
Digital audio coaxial in | 2 |
Line-in | ✓ |
AC (power) in | ✓ |
Number of HDMI outputs | 1 |
Component video (YPbPr/YCbCr) out | 1 |
Composite video out | 1 |
Line-out | ✓ |
Speakers connectivity type | Binding post |
Connectivity technology | Wired |
RS-232 ports | 1 |
Ethernet LAN | ✗ |
Wi-Fi | ✗ |
Supported radio bands | AM,DAB+,FM |
AM band range | 520 - 1710 kHz |
FM band range | 87.5 - 108 MHz |
Optical drive included | ✗ |
Display | - |
Audio decoders | - |
Equalizer | ✓ |
Remote control included | ✗ |
Product colour | Black |
Apple docking compatibility | Not supported |
Sustainability certificates | ENERGY STAR |
AC input voltage | 120 V |
AC input frequency | 60 Hz |
Power consumption (typical) | 50 W |
Power consumption (standby) | 0.5 W |
Width | 435 mm |
Depth | 387 mm |
Height | 167 mm |
Weight | 11500 g |
Package weight | 14000 g |
Manual | ✓ |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the NAD T748 below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the NAD T748 and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other NAD T748 owners to provide you with a good answer.
Does the NAD T748 allow for a Sonos sound bar to be integrated into the speaker array? Where would it plug into the receiver?
I want to connect my REGA Planar 2 phonograph to my NAD T748? The phonograph output is via 2 male "banana" connectors. After connecting how do I get the T748 to receive the phonograph input? Thanks in advance for your help in this :)
How do you reset the t 748 unit to factory default settings ? Thanks !
Number of questions: 3