View the manual for the MSI Z390-A Pro here, for free. This manual comes under the category Motherboards and has been rated by 15 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the MSI Z390-A Pro or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the MSI Z390-A Pro.
Brand | MSI |
Model | Z390-A Pro |
Product | Motherboard |
EAN | 4719072594152, 0824142169544 |
Language | English |
Filetype | Usermanual (PDF) |
Processor manufacturer | Intel |
Processor socket | LGA 1151 (Socket H4) |
Compatible processor series | Intel Celeron,Intel Core i3,Intel Core i5,Intel Core i7,Intel Pentium |
Motherboard chipset | Intel Z390 |
Audio chip | Realtek ALC892 |
Audio output channels | 7.1 channels |
Windows operating systems supported | Windows 10 |
Component for | PC |
Motherboard form factor | ATX |
Motherboard chipset family | Intel |
Supported memory types | DDR4-SDRAM |
Number of memory slots | 4 |
Memory slots type | DIMM |
Memory channels | Dual-channel |
ECC | ✓ |
Supported memory clock speeds | 2133,2400,2666,2800,3000,3200,3300,3333,3400,3466,3600,3733,3866,4000,4133,4200,4266,4300,4400 MHz |
Supported memory module capacities | 16GB |
Maximum internal memory | 64 GB |
Unbuffered memory | ✓ |
PCI Express x1 (Gen 3.x) slots | 4 |
PCI Express x16 (Gen 3.x) slots | 2 |
Number of M.2 (M) slots | 1 |
Supported storage drive types | HDD & SSD |
Supported storage drive interfaces | SATA |
RAID levels | 0,1,5,10 |
Parallel processing technology support | 2-Way CrossFireX |
Number of M.2 (E) slots | 1 |
Serial port via internal header | ✓ |
USB 2.0 connectors | 2 |
USB 3.2 Gen 1 (3.1 Gen 1) connectors | 2 |
Number of SATA III connectors | 6 |
USB 3.2 Gen 2 (3.1 Gen 2) connectors | 0 |
Number of SATA II connectors | 0 |
Number of Parallel ATA connectors | 0 |
Front panel audio connector | ✓ |
ATX Power connector (24-pin) | ✓ |
CPU fan connector | ✓ |
Number of chassis fan connectors | 5 |
Chassis intrusion connector | ✓ |
EPS power connector (8-pin) | ✓ |
TPM connector | ✓ |
Parallel connector | ✓ |
Serial port headers | 1 |
Thunderbolt headers | 1 |
RGB LED pin header | ✓ |
BIOS type | UEFI AMI |
Clear CMOS jumper | ✓ |
USB 2.0 ports quantity | 2 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity | 2 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity | 1 |
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity | 1 |
Ethernet LAN (RJ-45) ports | 1 |
eSATA ports quantity | 0 |
Firewire (IEEE 1394) ports | 0 |
PS/2 ports quantity | 1 |
VGA (D-Sub) ports quantity | 1 |
HDMI ports quantity | 0 |
DVI-D ports quantity | 1 |
DisplayPorts quantity | 1 |
Headphone outputs | 1 |
Microphone in | ✓ |
Ethernet LAN | ✓ |
Ethernet interface type | Gigabit Ethernet |
LAN controller | Intel® I219-V |
Wi-Fi | ✗ |
Width | 305 mm |
Depth | 244 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the MSI Z390-A Pro below.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the MSI Z390-A Pro and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other MSI Z390-A Pro owners to provide you with a good answer.
I have everything hooked up on my motherboard but I am not getting any video?
I have everything hooked up on my motherboard but I am not getting any video?
Manual en español
Why am I not getting any display after I plug everything in?
How can I activate Bluetooth on my 390-A PRO MB
M-flash doesn't work
What câble do i use on thé PCIe_pwr1 ?
When i use one gpu 3060, the power needed (Phoenixminer) was 114 watts but wattmeter showed 270 watts. When i use three gpus (3060,2x 1660ti), the power needed (Phoenixminer) was 255 watts but wattmeter showed 560 watts. Is there a way to reduce power consumption?
layout showing connections
Number of questions: 8