Reset Button—Press the Reset button continuously for 5 sec to load
factory defaults: Use a pointed object, such as a straightened paper clip or
toothpick, to press the reset button. This will cause the Ready LED to
blink on and off. The factory defaults will be loaded once the Ready LED
stops blinking (after about 5 seconds). At this point, you should release
the reset button.
NPort 5200 LED Indicators (top panel)
LED
Name
LED
Color
LED Function
red
Steady on: Power is on and NPort 5200 is
booting up.
Blinking: Indicates an IP conflict, or DHCP or
BOOTP server did not respond
properly.
green
Steady on: Power is on and NPort 5200 is
functioning normally.
Blinking: The device server has been located
by Administrator’s Location function
Ready
off Power is off, or power error condition exists.
orange
10 Mbps Ethernet connection.
green
100 Mbps Ethernet connection.
Ethernet
off Ethernet cable is disconnected, or has a short.
orange
Serial port is receiving data.
green
Serial port is transmitting data.
P1, P2
off
No data is being transmitted or received through
the serial port.
4. Hardware Installation Procedure
STEP 1: After removing NPort 5200 from the box, the first thing you
should do is connect the power adaptor. Connect the 12-30 VDC power
line with NPort 5200’s terminal block, or connect the DIN-Rail power
supply with NPort 5200’s terminal block.
STEP 2: Connect NPort 5200 to a network. Use a standard
straight-through Ethernet cable to connect to a Hub or Switch. When
setting up or testing NPort 5200, you might find it convenient to connect
directly to your computer’s Ethernet port. In this case, use a cross-over
Ethernet cable.
STEP 3: Connect NPort 5200’s serial port to a serial device.
STEP 4: Placement Options
In addition to placing
NPort 5200 on a
desktop or other
horizontal surface, you
may also make use of
the DIN-Rail or Wall
Mount options, as
illustrated here.
Wall Mount
10/100M
Ethernet
V+
V-
P1 RS-232
P2 RS-232
Ready
Link
P1
P2
Industrial RS-232 Device Server
5210
RESET
12-30V
5210
DIN-Rail
P/N: 1802002010400
Whatsapp
Mail
Facebook
Need help?
Number of questions: 0
Do you have a question about the Moxa NPort 5232I or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Moxa NPort 5232I owners to properly answer your question.
About the Moxa NPort 5232I
View the manual for the Moxa NPort 5232I here, for free. This manual comes under the category Servers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Moxa NPort 5232I or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Moxa NPort 5232I.
What is the weight of the Moxa NPort 5232I?
The Moxa NPort 5232I has a weight of 340 g.
What certifications does the Moxa NPort 5232I have?
The Moxa NPort 5232I has the following certifications: CE, FCC, EN.
What does the download speed on the internet depend on?
The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.
Is the manual of the Moxa NPort 5232I available in English?
Yes, the manual of the Moxa NPort 5232I is available in English .
