Repair of your machine should be carried out by an authorised service company. If your
machine requires repair or if you cannot solve an issue with the information provided
below, then you should:
• Unplug your machine from the mains power supply.
• Turn off the water supply.
FAULTPOSSIBLE CAUSETROUBLESHOOTING
Your machine does not start.
Machine not plugged in.Plug machine in.
Fuses are faulty.Replace the fuses.
No mains power supply.Check mains power.
Start/Pause button not pressed.Press the Start/Pause button.
Programme dial ‘stop’ position.Turn the programme dial to the desired position.
The machine door is not
completely closed.
Close the machine door.
Your machine does not
intake water.
Water tap is turned off.Turn tap on.
Water inlet hose may be twisted.Check water inlet hose and untwist.
Water inlet hose clogged.Clean water inlet hose filters. (*)
Inlet filter clogged.Clean the inlet filters. (*)
The machine door is not
completely closed.
Close the machine door.
Your machine does not
discharge water.
Drain hose clogged or twisted.
Check the drain hose, then either clean or
untwist.
Pump filter clogged.Clean the pump filter. (*)
Laundry is too tighly packed
together in the drum.
Spread your laundry in the machine evenly.
Your machine vibrates.
The feet have not been adjusted.Adjust the feet. (**)
Transit bolts fitted for
transportation have not been
removed.
Remove the transit bolts from the machine. (**)
Small load in the drum.This will not prevent operation of your machine.
Your machine is overloaded with
laundry or laundry is unevenly
spread.
Do not overload the drum. Spread laundry evenly
in the drum.
Your machine rests on a hard
surface.
Do not set up your Washing Machine on a hard
surface.
Excessive foam is formed in
the detergent drawer.
Excessive amount of detergent
used.
Press the Start/Pause button. To stop the foam,
dilute one tablespoon of softener into 1/2 litre of
water and pour into the detergent drawer. Press
the Start/Pause button after 5-10 mins.
Wrong detergent used.
Only use detergents produced for automatic
Washing Machines.
Unsatisfactory washing
result.
Your washing is too dirty for the
programme selected.
Use the information in the programme tables to
select the most appropriate programme.
Amount of detergent used
insufficient.
Use the amount of detergent as instructed on the
packaging.
There is too much laundry in your
machine.
Check that the maximum capacity for the
selected programme has not been exceeded.
Manual
View the manual for the Montpellier MW6201P here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Montpellier MW6201P or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Montpellier MW6201P below.
What temperature should I use for my laundry?
The washing label of your garment shows the recommended washing temperature.
Do I need to use an anti-scaling agent for my washing machine?
It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.
How do I prevent my washing machine from smelling?
Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.
Is the manual of the Montpellier MW6201P available in English?
Yes, the manual of the Montpellier MW6201P is available in English .
Need help?
Do you have a question about the Montpellier and is the answer not in the manual?
Question and answer
Number of questions: 0