Monitor Audio Monitor 200 manual

Monitor Audio Monitor 200
8.3 · 1
PDF manual
 · 170 pages
English
manualMonitor Audio Monitor 200

MRW-10 Amp Panel & Controls

Type of Main Speaker Monitor Series Product Crossover Control Setting
Small stand-mount/ bookshelf speaker Monitor 50/ 100 60-100 Hz
Floor Standing Speaker Monitor 200/ 300 50 - 80 Hz
Monitor Series6

1. RCA Stereo Inputs (Left & Right)

This is the method of signal input when using a stereo amplifier system, connection can be provided
by a pair of high-quality signal cables from the pre-out section of an amplifier. The crossover
frequency will need to be set if using this method of connection. We recommend setting the
crossover dial to approximately 80Hz as a starting point. This may vary depending on room and
tastes.
NOTE:- cable lengths should not exceed 10 metres to avoid interference from other electrical
appliances.

2. LFE Input (RCA Type)

This input is to be used when connecting the subwoofer to an AV amplifier/ receiver. When using
the LFE input, the crossover frequency dial is not used. This is due to the crossover function being
controlled by the AV amplifier/ processor to which it is connected.

3. 12 Volt Trigger Input ~ Centre Pin = +12Vdc

For external power control from AV amplifier/ receiver to the MRW-10. A 12 volt signal is supplied
by the AV amp/receiver and tells the MRW-10 to turn on from standby mode. This allows a more
accurately controlled auto on/off function, and is far more energy efficient. When using the 12v
trigger, the Mode Switch (8) must be in the Auto position for it to function correctly. Once the AV
receiver has been turned off the MRW-10 will remain on for around 15 minutes before going into
standby. The cable is supplied seperately.

4. Crossover Frequency Control

The crossover frequency control only operates when using the RCA stereo input (1) and is used
to set the upper frequency limit (low pass) of the subwoofer. The crossover control should be
set in accordance with the size or bass output of the main/satellite speakers. When using the
Monitor Series speakers, set this to between 50 - 100Hz (depending on additional speakers).
Experimentation is advisable.
Notes:
1. ICONS/TEXT TO BE SILKSCREENED
IN WHITE - RAL 9003
2. IMAGE FOR REFERENCE PURPOSES ONLY.
3. DO NOT SILK SCREEN TEXT IN RED -
FOR REGERENCE PURPOSES ONLY.
.
.
.
.
.
.
.
.
.
.
.
.
L
R
LFE
50 Hz 120 Hz MIN MAX
INPUT TRIGGER
FREQUENCY
BASS PHASE MODE
VOLUME
IMPACT
MOVIE
POWER
ON
OFF
ON
AUTO
MUSIC
110 - 120V~
220 - 240V~
12V
DESIGNED IN THE UK, MADE IN CHINA
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
ATTENTION: AFIN DE RÉDUIRE TOUT RISQUE DE CHOC
ÉLECTRIQUE, NE PAS RETIRER LE COUVERCLE
(OU CAPOT ARRIERE), NE CONTIENT PAS DE PIECES
REPARABLES PAR L’UTILISATEUR CONFIER TOUT
ENTRETIEN À UN PERSONNEL QUALIFIÉ.
a MONITOR AUDIO
Product: BRONZE 5G W10 V2
Date:17th DECEMBER 2013
UK/EURO/US VERSION
AC110-120V ~ 50-60Hz
AC220-240V ~ 50-60Hz
200 W
FUSE: 110-120VAC T4AL/250VAC
FUSE: 220-240VAC T4AL/250VAC
1
2
4 5 6
7 8
9
11
10
10a
3

Manual

View the manual for the Monitor Audio Monitor 200 here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Monitor Audio Monitor 200 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Monitor Audio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Monitor Audio Monitor 200 specifications

Below you will find the product specifications and the manual specifications of the Monitor Audio Monitor 200.

General
BrandMonitor Audio
ModelMonitor 200
Productspeaker
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Monitor Audio Monitor 200 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Monitor Audio Monitor 200 available in English?

Yes, the manual of the Monitor Audio Monitor 200 is available in English .

Is your question not listed? Ask your question here

No results