Tipo di altoparlanti principaliProdotti della serie MonitorImpostazioni controllo crossover
Altoparlante piccolo su asta/mensolaMonitor 50/10060-100 Hz
Altoparlante da pavimentoMonitor 200/30050-80 Hz
1. Ingressi stereo RCA (sinistro e destro)
Quando si usa un sistema di amplificazione stereo, questo è il metodo di ingresso del segnale; la
connessione può essere fornita da una coppia di cavi di segnale di alta qualità dalla parte preout
di un amplificatore. Se si utilizza questo metodo di collegamento, sarà necessario impostare la
frequenza di crossover. Inizialmente, si raccomanda di impostare il crossover su 80 Hz circa.
Questa impostazione può variare in base all’ambiente e alle preferenze personali.
NOTA:- per evitare interferenze con altre apparecchiature elettriche, la lunghezza dei cavi non
dovrebbe superare i 10 metri.
2. Ingresso LFE (tipo RCA)
Questo ingresso deve essere usato quando si collega il subwoofer a un amplificatore/ricevitore
audio-video. Quando si usa l’ingresso LFE, la frequenza di crossover non viene utilizzata perché la
funzione di crossover è controllata dall’amplificatore/processore audio-video a cui è collegata.
3. Ingresso trigger da 12 V ~ Piedino centrale = +12 Vcc
Per il controllo dell’alimentazione esterna dall’amplificatore/ricevitore audio-video all’unità MRW-
10. L'amplificatore/ricevitore audio-video emette un segnale da 12 volt che indica all’unità MRW-
10 di passare dalla modalità standby all’accensione. In questo modo, la funzione automatica di
accensione/spegnimento sarà controllata con maggiore accuratezza e consentirà un maggiore
risparmio energetico. Per un funzionamento corretto del trigger da 12 V, se utilizzato, l’interruttore
MODE (8) deve trovarsi nella posizione AUTO. Quando il ricevitore AV viene spento, l’unità MRW-10
resta accesa per 15 minuti circa prima di entrare in standby. Il cavo viene fornito separatamente.
4. Controllo della frequenza di crossover
Il controllo della frequenza di crossover funziona esclusivamente quando si usa l’ingresso stereo RCA (1)
e viene utilizzato per impostare il limite superiore di frequenza (passa-basso) del subwoofer. Il controllo di
crossover deve essere impostato in base alle dimensioni o all’uscita dei bassi sugli altoparlanti principali/
secondari. Quando si usano altoparlanti della serie Monitor, il controllo deve essere impostato sui 50-100
Hz, in funzione degli altoparlanti aggiuntivi. Si consiglia di sperimentare varie soluzioni.
Notes:
1. ICONS/TEXT TO BE SILKSCREENED
IN WHITE - RAL 9003
2. IMAGE FOR REFERENCE PURPOSES ONLY.
3. DO NOT SILK SCREEN TEXT IN RED -
FOR REGERENCE PURPOSES ONLY.
.
.
.
.
.
.
.
.
.
.
.
.
L
R
LFE
50 Hz120 Hz MIN MAX
INPUTTRIGGER
FREQUENCY
BASSPHASEMODE
VOLUME
IMPACT
MOVIE
POWER
ON
OFF
ON
AUTO
MUSIC
110 - 120V~
220 - 240V~
12V
DESIGNED IN THE UK, MADE IN CHINA
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
ATTENTION: AFIN DE RÉDUIRE TOUT RISQUE DE CHOC
ÉLECTRIQUE, NE PAS RETIRER LE COUVERCLE
(OU CAPOT ARRIERE), NE CONTIENT PAS DE PIECES
REPARABLES PAR L’UTILISATEUR CONFIER TOUT
ENTRETIEN À UN PERSONNEL QUALIFIÉ.
a MONITOR AUDIO
Product: BRONZE 5G W10 V2
Date:17th DECEMBER 2013
UK/EURO/US VERSION
AC110-120V ~ 50-60Hz
AC220-240V ~ 50-60Hz
200 W
FUSE: 110-120VAC T4AL/250VAC
FUSE: 220-240VAC T4AL/250VAC
1
2
456
78
9
11
10
10a
3
Manual
View the manual for the Monitor Audio Monitor 200 here, for free. This manual comes under the category speakers and has been rated by 1 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Monitor Audio Monitor 200 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Monitor Audio Monitor 200 below.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Can bluetooth devices of different brands be connected to each other?
Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.
Wat is Dolby Atmos?
Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
Is the manual of the Monitor Audio Monitor 200 available in English?
Yes, the manual of the Monitor Audio Monitor 200 is available in English .
Need help?
Do you have a question about the Monitor Audio and is the answer not in the manual?
Question and answer
Number of questions: 0