MJX T40C manual

MJX T40C
5.3 · 1
PDF manual
 · 7 pages
English
manualMJX T40C
1.Coaxial-rotor design, built-in gyro and negative rotation of rotors are used to increase the
helicopter’s stability and operability. It is the best choice for beginner.
2.Aluminum fuselage design and innovative appearance make the helicopter full of attraction; By
using of the 2.4G auto connection technology, users can operated many helicopters simultaneously
with high stability.
3.With the full charge battery, Li-polymer 7.4V1500mAh,the helicopter can flight 7 min steadily.
4.Tripple circuit protections make the flight more safer and improve the service life of the helicopter.
5.Installed with camera device, the helicopter has videography function.

Introduction

Thank you for purchasing this product. Please read this manual carefully before use and retain it for
future reference.
The wire that fixed on the landing gear is the receiver
of the helicopter, disassembling this wire may be
dangerous or causes accident.
Gross Weight: about 655g
Motor: #370 Tail Rotor Diameter: 148MM
Battery: Li-polymer 7.4V
Fuselage Length:810MM
Overall height: 315MM
Gear Ratio: 14:1
Charging Time: about 3 hours
Main Rotor Diameter: 515MM

Technical parameter of the helicopter

Manual

View the manual for the MJX T40C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the MJX T40C or do you need help? Ask your question here

Need help?

Do you have a question about the MJX and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

MJX T40C specifications

Below you will find the product specifications and the manual specifications of the MJX T40C.

The MJX T40C is an RC helicopter that falls under the not categorized category. Designed for remote control enthusiasts, this helicopter offers a unique and exhilarating flying experience. With its sleek and compact design, the MJX T40C is suitable for both indoor and outdoor use. Its lightweight construction allows for easy maneuverability and agile flight. The helicopter is equipped with a powerful motor that provides a stable and smooth operation. The MJX T40C features a built-in camera, allowing users to capture aerial footage while in flight. This camera is capable of capturing clear and high-quality images and videos. Controlling the helicopter is made easy with its user-friendly remote control system. The remote control allows for precise and responsive flight controls, ensuring an enjoyable flying experience. Additionally, the MJX T40C is equipped with a reliable and durable battery, providing extended flight time. It also comes with spare parts and accessories, offering convenience for potential repairs or replacements. The MJX T40C operates on a specific frequency, allowing multiple helicopters to be flown simultaneously without interference. This makes it ideal for group flying activities and competitions. Overall, the MJX T40C is a versatile and exciting RC helicopter that delivers an impressive flight performance and captures stunning aerial footage.

General
BrandMJX
ModelT40C
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the MJX T40C below.

What should I do if the MJX T40C helicopter does not react when I try to control it?

If your MJX T40C helicopter does not react when you try to control it, follow these steps: 1. Check the battery: Make sure the battery of the helicopter is fully charged. If the indicator light on the helicopter is flashing rapidly, it means the battery is low. Charge the battery before using the helicopter. 2. Establish radio connection: Set the helicopter down on a platform and wait until the indicator light turns on without blinking. This indicates that the helicopter and the transmitter are in radio connection. If the connection is lost, repeat the connection procedure. 3. Adjust the gyro trimmer: If the helicopter keeps self-rotating in the air even without control signal, adjust the trimmer of the gyro on the remote control to correct it. 4. Check for circuit protection devices: If the helicopter keeps flying forward or backward without control signal, adjust the trimmer on the remote control to correct it. Also, ensure that the circuit protection devices are functioning properly. By following these steps, you should be able to troubleshoot and resolve the issue of your MJX T40C helicopter not reacting to control commands.

How can I improve the underpowered performance of the MJX T40C helicopter?

To improve the underpowered performance of the MJX T40C helicopter, follow these steps: 1. Ensure that the battery of the helicopter is fully charged. Connect it to a charger and allow it to charge completely. 2. Check the indicator light of the helicopter. If it is flashing rapidly, it means that the gyro is in the testing state. Set the helicopter down on a platform and wait until the indicator light turns to a constant "ON" without blinking. 3. If the helicopter and the transmitter are not in radio connection, repeat the connection procedure. This will establish a stable connection between the helicopter and the transmitter. By following these steps, you can improve the underpowered performance of the MJX T40C helicopter. The coaxial-rotor design, built-in gyro, and negative rotation of rotors contribute to the helicopter's stability and operability, making it an ideal choice for beginners. The aluminum fuselage design and innovative appearance add to its attractiveness. With the full charge battery (Li-polymer 7.4V1500mAh), the helicopter can fly steadily for approximately 7 minutes. Additionally, the helicopter is equipped with triple circuit protections for safer flights and an installed camera device for videography purposes. Please note that disassembling the wire fixed on the landing gear, which is the receiver of the helicopter, can be dangerous and may cause accidents.

What should I check if I am experiencing radio connection issues with the MJX T40C helicopter?

If you are experiencing radio connection issues with the MJX T40C helicopter, there are a few steps you can take to troubleshoot the problem: 1. Check the battery: Ensure that the battery of the helicopter is fully charged. If the indicator light on the helicopter is flashing rapidly, it may indicate a low battery. Charge the battery and wait until the indicator light turns to a constant "ON" without blinking. 2. Repeat the connection procedure: If the helicopter and the transmitter are out of radio connection, try repeating the connection procedure. This can be done by following the instructions in the manual for establishing the radio connection between the helicopter and the transmitter. 3. Adjust the swash plate: If the helicopter is not responding properly to the transmitter controls, check the swash plate. Insert the battery plug into the power socket of the helicopter and set the helicopter down. During the auto signal connection process, the indicator light should remain "ON" without blinking. If the swash plate is not horizontal, adjust the length of the servo connector until the swash plate remains horizontal. By following these steps, you should be able to troubleshoot radio connection issues with the MJX T40C helicopter.

How do I charge the battery of the MJX T40C helicopter?

To charge the battery of the MJX T40C helicopter, follow these steps: 1. Turn off the helicopter. 2. Unplug the battery cable from the helicopter. 3. Insert the plug of the battery cable into the port of the charger, matching the plug to the port. 4. Start charging the battery. 5. While charging, a red light will be on to indicate the charging process. 6. Wait for approximately 3 hours for the battery to fully charge. 7. Once charging is complete, the red light will turn into a green light. 8. Disconnect the battery cable from the charger and remove it from the port. 9. The battery is now charged and ready to be used in the MJX T40C helicopter. Make sure to always charge the battery before using the helicopter to ensure optimal performance.

Is the manual of the MJX T40C available in English?

Yes, the manual of the MJX T40C is available in English .

Is your question not listed? Ask your question here

No results