View the manual for the Milwaukee M18 RC-0 here, for free. This manual comes under the category radios and has been rated by 1 people with an average of a 9.4. This manual is available in the following languages: English. Do you have a question about the Milwaukee M18 RC-0 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Milwaukee M18 RC-0.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Milwaukee M18 RC-0 below.
FM stands for Frequency Modulation and AM stands for Amplitude Modulation. The biggest difference between FM radio stations compared to AM radio stations is the sound quality.
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
To adjust the volume of the radio, simply turn the volume knob located on the front of the device clockwise to increase the volume or counter-clockwise to decrease it.
To connect your smartphone via Bluetooth, first, ensure that the radio's Bluetooth function is enabled. Then, on your smartphone, go to the settings menu and turn on Bluetooth. Look for the "M18 RC-0" device in the available devices list and select it to establish the connection.
To switch between AM and FM radio stations, use the mode button on the front panel of the radio. Press the mode button to cycle between the available radio modes until you reach the desired one.
To save your favorite radio stations, use the preset buttons located on the front of the radio. Tune in to the desired station, then press and hold one of the preset buttons for a few seconds until you hear a beep. This will save the station to that specific preset button for easy access in the future.
To check the battery level of the radio, press the battery status button on the front panel. The battery status indicator lights will illuminate, indicating the remaining battery power. Each light represents approximately 20% of the battery capacity.
Yes, the manual of the Milwaukee M18 RC-0 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Milwaukee and is the answer not in the manual?
Question and answer
Number of questions: 0