Mikrotik OmniTIK 5 PoE ac manual

Mikrotik OmniTIK 5 PoE ac
8.1 · 1
PDF manual
 · 4 pages
English
manualMikrotik OmniTIK 5 PoE ac

OmniTik series

Quick setup guide and warranty information

The OmniTik is an outdoor wireless system with a built in antenna. It can be used as a wireless Access Point, CPE
or for point-to-point links. It supports wireless operation in the 5GHz range (specific frequencies depend on region).

Mounting

Slide the included pole mount adapter with the clip facing forward, until the clip clicks into place. Use the included
hose clamp to attach the unit to a pole or mast. Adjustable QuickMount adapters are available separately. The
OmniTik has a locking screw that secures the port door, it can be closed with a 5mm hex screwdriver.

Connecting

1. Open the Ethernet port door to connect your PC or LAN cables to the Ethernet ports, connect the other end
of the Ethernet cable to a PoE injector
2. Set LAN computer IP configuration to automatic (DHCP)
3. Default IP address of the unit is 192.168.88.1, open this address in your web browser to start configuration.
The username is admin and there is no password

Powering

The device accepts power from passive and active (802.3af/at) power sources. A passive PoE injector is included
in the box.

Power output

Applies only to OmniTik 5 PoE ac: This device can supply PoE power to external devices from its Ethernet ports.
This is convenient as you don't need any additional PoE injectors to power other devices. The output voltage will be
the same as input voltage. Maximum power output of each Ethernet port in this mode is 1A (total maximum for all
ports is 2A). To reach maximum output power it is recommended to use a high voltage adapter together with the
included PoE injector to power the OmniTik unit (48/56V), because 802.3af/at input is limited to 30W and OmniTik
will consume up to 15W by itself. Once Power Output is enabled in RouterOS, the Ethernet LED adds red color to
it (green means Ethernet link is made, red means power but no link, red and green both means there is link and
power).

Booting process

Initial connection has to be done via the Ethernet cable from the LAN side. Open 192.168.88.1 in your web
browser. Username is admin and there is no password. In case IP connection is not available, WinBox can be
used to connect to the MAC address of the device. More information here:
http://wiki.mikrotik.com/wiki/First_time_startup
In case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RESET button of
the device when starting it until the LED light turns off, and device will start to look for Netinstall servers.

Extension slots and ports

Five 10/100/1000 Gigabit Ethernet ports, supporting automatic cross/straight cable correction (Auto
MDI/X), so you can use either straight or cross-over cables for connecting to other network devices.
One integrated wireless 5GHz 802.11a/n/ac, 2x2 MIMO with built in grid antenna, max gain 7.5dBi
See www.routerboard.com for more information. Contact support@mikrotik.com 6-May-16

Manual

View the manual for the Mikrotik OmniTIK 5 PoE ac here, for free. This manual comes under the category Access points and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Mikrotik OmniTIK 5 PoE ac or do you need help? Ask your question here

Need help?

Do you have a question about the Mikrotik OmniTIK 5 PoE ac and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Mikrotik OmniTIK 5 PoE ac owners to provide you with a good answer.

Number of questions: 0

Mikrotik OmniTIK 5 PoE ac specifications

Below you will find the product specifications and the manual specifications of the Mikrotik OmniTIK 5 PoE ac.

General
Brand Mikrotik
Model OmniTIK 5 PoE ac | RBOMNITIKPG-5HACD
Product Access Point
EAN 5704174179610, 5902560364842, 5902560364859, 4752224004420
Language English
Filetype User manual (PDF)
Features
Maximum data transfer rate 54 Mbit/s
Networking standards IEEE 802.11ac,IEEE 802.3af,IEEE 802.3at
Ethernet LAN data rates 10,100,1000 Mbit/s
2.4 GHz -
5 GHz
Design
Placement Pole
Internal
Performance
Flash memory 16 MB
Internal memory 128 MB
Built-in processor
Weight & dimensions
Width 129 mm
Depth 58 mm
Height 416 mm
Power
Power consumption (max) 18 W
AC input voltage 12 - 57 V
Power over Ethernet (PoE)
Packaging content
PoE adapter included
Mounting kit
AC adapter included
Cables included AC
Security
Security algorithms -
Ports & interfaces
USB 2.0 ports quantity 1
Ethernet LAN (RJ-45) ports 5
DC-in jack
USB connector type USB Type-A
Antenna
Antenna gain level (max) 7.5 dBi
Logistics data
Harmonized System (HS) code 85176990
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Mikrotik OmniTIK 5 PoE ac below.

Is your question not listed? Ask your question here

No results