Miele DA 9298 W manual

Miele DA 9298 W
7.5 · 1
PDF manual
 · 1 page
Universal
manualMiele DA 9298 W

Manual

View the manual for the Miele DA 9298 W here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: Universal. Do you have a question about the Miele DA 9298 W or do you need help? Ask your question here

Need help?

Do you have a question about the Miele and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Miele DA 9298 W specifications

Below you will find the product specifications and the manual specifications of the Miele DA 9298 W.

General
BrandMiele
ModelDA 9298 W | 11870900
Productexhaust hood
EAN4002516527565
LanguageUniversal
FiletypeEnergy label (PDF)
Design
Product colorBlack
TypeWall-mounted
Control typeTouch
Built-in display-
Exhaust locationTop
Exhaust connection diameter150 mm
Performance
Maximum extraction power915 m³/h
Maximum recirculating power715 m³/h
Type of extractionDucted/Recirculating
Lighting efficiency classA
Fluid dynamic efficiency classA
Grease filtering efficiency classC
Noise level (low speed)38 dB
Noise level (high speed)53 dB
Noise level (intensive speed)70 dB
Intensive speedYes
Noise level- dB
Minimum distance from electric hob450 mm
Minimum distance from gas hob650 mm
Number of speeds3
Pressure (Pa)388
Power
Energy efficiency classA+++
Energy efficiency scaleA+++ to D
Annual energy consumption21 kWh
Connected load230 W
AC input voltage230 V
AC input frequency50 Hz
Current10 A
Lighting
Bulb power3 W
Number of bulbs1 bulb(s)
Bulb typeLED
Illuminance350 lx
Filtering
Grease filter typeStainless steel
Number of filters3 pc(s)
Dishwasher proof filterYes
Removable filterYes
Washable filterYes
Weight & dimensions
Width880 mm
Height (min)500 mm
Weight20000 g
Depth260 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Miele DA 9298 W below.

What is the weight of the Miele DA 9298 W?

The Miele DA 9298 W has a weight of 20000 g.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

What is the width of the Miele DA 9298 W?

The Miele DA 9298 W has a width of 880 mm.

What is the depth of the Miele DA 9298 W?

The Miele DA 9298 W has a depth of 260 mm.

What energy label does the Miele DA 9298 W have?

The Miele DA 9298 W has energy label A+++.

What is the maximum extraction power of the Miele DA 9298 W?

The maximum extraction power of the Miele DA 9298 W is 915 m³/h. This high extraction power ensures efficient removal of smoke and odors from the kitchen, providing a clean and fresh environment for the user.

Does the Miele DA 9298 W have a recirculating option?

Yes, the Miele DA 9298 W offers a maximum recirculating power of 715 m³/h. This allows for the option of recirculating the air within the kitchen instead of ducted extraction, providing flexibility for different kitchen setups.

What is the noise level of the Miele DA 9298 W on low speed?

The noise level of the Miele DA 9298 W on low speed is 38 dB. This low noise level ensures a quiet and comfortable cooking experience, making it suitable for kitchens where noise reduction is desired.

What is the efficiency class of the grease filtering system in the Miele DA 9298 W?

The grease filtering system of the Miele DA 9298 W has an efficiency class of C. While not the highest, this level still provides decent grease filtration, ensuring cleaner air by capturing grease particles effectively.

What is the type of control for the Miele DA 9298 W?

The Miele DA 9298 W has a touch control type. This intuitive and user-friendly control system allows for easy operation and adjustment of the exhaust hood, enhancing convenience and usability for the user.

How can I adjust the airflow settings of the Miele DA 9298 W exhaust hood?

To adjust the airflow settings of the Miele DA 9298 W exhaust hood, follow these steps: 1. Press the power button (Aan/Uit-toets) to turn on the exhaust hood. All symbols will appear dimmer. 2. Press and hold the delay timer button (toets voor de nalooptijd) until the symbols for the grease filter (vetfilter) and anti-odor filter (anti-geurfilter) light up. 3. Touch the anti-odor filter symbol (anti-geurfiltersymbool). One of the power levels and the anti-odor filter symbol will start flashing. 4. The power levels 1 to B represent the number of hours set for the filter replacement: - Level 1: 120 hours - Level 2: 180 hours - Level 3: 240 hours - Level B: Not activated 5. Use the sensor buttons for the extraction power (afzuigvermogen) to select the desired time. 6. Confirm the procedure by pressing the anti-odor filter button (toets van het anti-geurfilter). Note: If you do not confirm the procedure within 4 minutes of setting it, the previous setting will be retained. Please note that these instructions are specific to the Miele DA 9298 W exhaust hood and may vary for other models.

Why is the motor of the Miele DA 9298 W exhaust hood making unusual noise?

The motor of the Miele DA 9298 W exhaust hood may make unusual noise due to various reasons. Here are some possible causes and troubleshooting steps: 1. Grease buildup: Over time, grease can accumulate in the motor and cause noise. Clean the grease filters regularly according to the instructions in the manual. 2. Loose or damaged parts: Check if any parts of the exhaust hood, such as the fan blades or motor housing, are loose or damaged. Tighten or replace them if necessary. 3. Motor malfunction: If the noise persists and none of the visible parts are causing it, there may be a motor malfunction. In this case, it is recommended to contact Miele customer service for further assistance. 4. Improper installation: Ensure that the exhaust hood is properly installed and aligned. Misalignment or improper installation can cause vibrations and noise. 5. External factors: Noise from the motor can also be influenced by external factors such as nearby objects or vibrations from other appliances. Check for any potential sources of interference and make necessary adjustments. If the noise issue persists or if you have any other concerns, it is best to consult the Miele customer service for professional assistance.

How do I replace the cooking surface lighting of the Miele DA 9298 W exhaust hood?

To replace the cooking surface lighting of the Miele DA 9298 W exhaust hood, follow these steps: 1. Turn on the exhaust hood by pressing the power button (Aan/Uit-toets). 2. Touch the lighting button (verlichtingstoets) briefly. The lighting will be at maximum brightness, indicated by all three dashes next to the lighting button. 3. Keep your finger on the lighting button while the light is on. The light will gradually dim until you release the button. 4. If you want to adjust the brightness, touch the dashes next to the lighting button to choose from three brightness levels. 5. To turn off the cooking surface lighting, touch the lighting button again. Please note that these instructions are specific to the Miele DA 9298 W exhaust hood and may vary for other models.

What accessories do I need for the recirculation mode of the Miele DA 9298 W exhaust hood?

To use the Miele DA 9298 W exhaust hood in recirculation mode, you will need the following accessories: 1. Anti-odor filter: This is an accessory that needs to be ordered separately. It is a one-time use or regenerable filter that helps to eliminate odors in the recirculation mode. Please note that the manual does not provide specific information about any other accessories required for the recirculation mode of the Miele DA 9298 W exhaust hood. For more detailed information about the accessories and their availability, it is recommended to refer to the product documentation or contact Miele customer service. Please note that the information provided is based on the available pages in the manual and may not cover all accessories related to the recirculation mode of the exhaust hood.

How can I access the compliance declaration for the Miele DA 9298 W exhaust hood?

To access the compliance declaration for the Miele DA 9298 W exhaust hood, follow these steps: 1. Locate the product documentation or user manual that came with your Miele DA 9298 W exhaust hood. 2. Look for the section that contains technical specifications or product information. 3. Within this section, you should find a page or section dedicated to compliance information. 4. On this page, you will find details about the product's compliance with relevant regulations and directives. 5. Look for specific information related to the Miele DA 9298 W exhaust hood, such as energy consumption, efficiency ratings, and other compliance-related details. Please note that the compliance declaration may vary depending on the region or country where the product is sold. If you cannot find the compliance declaration in the product documentation, you can contact Miele customer service for further assistance. Please note that the information provided is based on the available pages in the manual and may not cover all details related to the compliance declaration of the exhaust hood.

Is the manual of the Miele DA 9298 W available in English?

Unfortunately, we do not have the manual for the Miele DA 9298 W available in English. This manual is available in Universal.

Is your question not listed? Ask your question here

No results