Miele DA 1260 es manual

Miele DA 1260 es
5.9 · 1
PDF manual
 · 44 pages
English
manualMiele DA 1260 es

Installation

*INSTALLATION*
32

Installation under a wall unit

When selecting the installation position,
ensure that the recirculation grille at the
front of the appliance will not be
covered by the wall unit.
Cut-out for mains cable and
extraction ducting
Cut the drilling template to size and
secure to the bottom of the wall unit.
For extraction mode make a cut-out
of at least 170mm in the bottom of
the unit.
If the mains connection cable is to be
fed through the unit, a hole will also
need to be made in the unit for it.
Securing from above

Use only the fixing points as

shown on the drilling template and
the screws supplied.
Incorrect fitting can lead to damage
to the cooker hood and could
compromise electrical safety (e.g.
electric shock).
Use the drilling template to drill
four5mm fixing holes through the
bottom of the cabinet.
Remove the drilling template.

Manual

View the manual for the Miele DA 1260 es here, for free. This manual comes under the category exhaust hoods and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Miele DA 1260 es or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Miele and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Miele DA 1260 es specifications

Below you will find the product specifications and the manual specifications of the Miele DA 1260 es.

General
BrandMiele
ModelDA 1260 es
Productexhaust hood
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Miele DA 1260 es below.

When should I replace the carbon filter on my extractor hood?

The carbon filter should be replaced every three to twelve months.

How often should I clean the metal hood grease filters?

The metal grease filters should be cleaned every eight to ten weeks.

Where can I find the model number of my cooker ectractor hood?

The model number of the hood is usually found on a white label inside the hood.

Is the manual of the Miele DA 1260 es available in English?

Yes, the manual of the Miele DA 1260 es is available in English .

Is your question not listed? Ask your question here

No results