View the manual for the Midea MAP10HS1WBL here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Midea MAP10HS1WBL or do you need help? Ask your question here
| Brand | Midea |
| Model | MAP10HS1WBL |
| Product | air-conditioning |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Midea MAP10HS1WBL below.
BTU stands for British Thermal Unit and is a unit used to indicate cooling power.
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Midea air conditioner at least four times a year.
To change the temperature settings on your Midea MAP10HS1WBL air conditioner, locate the remote control and use the arrow buttons to increase or decrease the desired temperature.
Insufficient cooling could be caused by various factors. Ensure that all windows and doors are closed properly, check if the air filter is dirty and needs cleaning, and confirm that the fan speed is set to a suitable level for the room size.
To adjust the fan speed, find the "Fan Speed" button on the remote control and press it to cycle through the available options. Choose the desired speed setting based on your preference and the cooling requirements of the room.
Activate the sleep mode by pressing the "Sleep" button on the remote control. This mode adjusts the temperature and fan speed to promote a comfortable sleep environment while conserving energy.
Unusual noises could indicate a problem with the air conditioner. Check if any foreign objects are obstructing the unit or the air vents. If the issue persists, it may require professional assistance to diagnose and repair the specific cause of the noise.
Yes, the manual of the Midea MAP10HS1WBL is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Midea and is the answer not in the manual?
Question and answer
Number of questions: 5My midea MAP10HS1WBL isn't pumping water and drain plug is dry cleaned filter the 2 on the back what is the issue it kicked breaker last night
1 comment
Add the 1/2 inch hose that came with the unit. Remove black drain plug. Add hose. Run into a gallon jug. Or buy 20 ft of Clear Vinyl tubing, 1/2 inch x 1/2 inch brass coupler. 3/4 paddle drill bit. drill hole in exhaust panel. Connect tubing parts. Route hose through 3/4 inch hole in exhaust panel. problem solved! it happened to me! My fix has been good for two years.
What does P1 mean
3 comments
add the 1/2 inch hose where the drain plug is located. it will drain the unit. I had the hose running into a gallon jug. It filled up and ran onto my floor. FiX! Go to Lowes. Purchase a 1/2 inch coupler PEX-A expansion 1/2” x 1/2” straight coupling. 20 ft feet of clear vinyl tubing, ID 1/2” OD 5/8 20 ft long. 3/4 paddle drill bit. connect clear vinyl tubing, coupler. drill hole in exhaust panel. Run hose through hose. Use six to seven feet of clear vinyl tubing. Long length is better. Not short length! Good luck!
Unit fills up with condensed fluid during operation. Unit needs to drain. A 1/2 inch hose came with the unit. Remove black drain plug. attach hose
Go to Lowes or Home Depot. Show the person in plumbing my text on the fix. They will know what to get for you. Email me if you have questions.
cant find full user manual for this model of air/heater
P1 error persistent after draining
Turn my heater on