MicroView MVID-02IR-E manual

MicroView MVID-02IR-E
5.6 · 1
PDF manual
 · 172 pages
English
manualMicroView MVID-02IR-E
Network Camera User Manual
42
UDP: Provides real-time audio and video streams.
HTTP: Allows the same quality as of TCP without setting specific ports for
streaming under some network environments.
MULTICAST: It’s recommended to select MCAST type when using the
Multicast function. For detailed information about Multicast, refer to Section
7.1.1 Configuring TCP/IP Settings.
Play Performance: Set the play performance to Shortest Delay or Auto.
Rules: It refers to the rules on your local browser, select enable or disable to
display or not display the colored marks when the motion detection, face
detection, or intrusion detection is triggered. E.g., enabled as the rules are, and
the face detection is enabled as well, when a face is detected, it will be marked
with a green rectangle on the live view.
Image Format: Choose the image format for picture capture.
Record File Settings: Set the saving path of the recorded video files. Valid for the
record files you recorded with the web browser.
Record File Size: Select the packed size of the manually recorded and
downloaded video files to 256M, 512M or 1G. After the selection, the maximum
record file size is the value you selected.
Save record files to: Set the saving path for the manually recorded video files.
Save downloaded files to: Set the saving path for the downloaded video files
in playback mode.
Picture and Clip Settings: Set the saving paths of the captured pictures and clipped
video files. Valid for the pictures you capture with the web browser.
Save snapshots in live view to: Set the saving path of the manually captured
pictures in live view mode.
Save snapshots when playback to: Set the saving path of the captured pictures
in playback mode.
Save clips to: Set the saving path of the clipped video files in playback mode.
Note: You can click Browse to change the directory for saving the clips and
pictures, and click Open to open the set folder of clips and picture saving.

Manual

View the manual for the MicroView MVID-02IR-E here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the MicroView MVID-02IR-E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the MicroView and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

MicroView MVID-02IR-E specifications

Below you will find the product specifications and the manual specifications of the MicroView MVID-02IR-E.

The MicroView MVID-02IR-E is a security camera with a total of 2 megapixels and a maximum resolution of 1920 x 1080 pixels, providing Full HD quality images. It features a CMOS sensor, with a single sensor and an optical sensor size of 1/2.8 inches. The camera offers progressive scan and video streaming capabilities, utilizing multicast streaming method. Equipped with a fixed focal length of 2.8 millimeters, the MVID-02IR-E also includes Digital Wide Dynamic Range (DWDR) and 3D Noise Reduction (NR) features for enhanced image clarity. It can be powered using a DC power source or Power over Ethernet (PoE) for added flexibility. With an International Protection (IP) code of IP67, this camera is suitable for outdoor use and is resistant to dust and water ingress. The 2MP Mini IR Dome IP Camera WDR 1080p Full HD Outdoor model offers night vision capabilities up to 30 meters using its built-in infrared lights. It can be easily connected to a Network Video Recorder (NVR) using a standard CAT 5 computer network cable. The camera is compatible with EasyView and most other Video Management System (VMS) providers, featuring an OnVif driver and easy installation with the IP-Tool from MicroView.

General
BrandMicroView
ModelMVID-02IR-E | MVID-02IR-E
Productsecurity camera
EAN5711783405108
LanguageEnglish
FiletypeUser manual (PDF)
Video
Full HDYes
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video streamingYes
Digital Wide Dynamic Range (DWDR)Yes
3D NR (Noise Reduction)Yes
Video formats supportedH.264, H.264+, M-JPEG
Bit rate32 Kbps - 8 Mbps
Supported graphics resolutions352 x 240,352 x 288,640 x 360,1280 x 720 (HD 720),1280 x 960,1920 x 1080 (HD 1080)
Frame rate30 fps
Image quality adjustmentBrightness, Contrast, Saturation
Back Light Compensation (BLC)Yes
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/2.8 "
Progressive scanYes
Network
Streaming methodMulticast
Quality of Service (QoS) supportYes
Supported network protocolsTCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LANYes
Wi-Fi-
Bluetooth-
Ethernet interface typeFast Ethernet
Networking standardsIEEE 802.3af
Lens system
Fixed focal length2.8 mm
Number of lenses1
Power
Power source typeDC, PoE
Power consumption (typical)5.3 W
Design
International Protection (IP) codeIP67
WeatherproofYes
IK codeIK10
Mounting typeCeiling
Protection featuresShock resistant
Form factorDome
Product colorBlack, White
Night vision
Night visionYes
Night vision distance30 m
LED typeIR
Storage
Card reader integratedYes
Built-in HDD-
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Camera
Minimum illumination0.01 lx
Camera shutter speed1/3 - 1/10000 s
Field of view (FOV) angle106 °
Performance
Infrared (IR) cut-off filterYes
Connectivity technologyWired
Alarm input/outputYes
TypeIP security camera
Placement supportedOutdoor
Audio
Audio formats supportedG.711, G.726
Management features
Behavior analysisIntrusion detection, Line crossing detection
Security
Video motion detectionYes
Digital watermarkYes
Packaging content
Number of cameras1
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Operational conditions
Operating temperature (T-T)-30 - 60 °C
Weight & dimensions
Diameter111 mm
Height82 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the MicroView MVID-02IR-E below.

What is the weight of the MicroView MVID-02IR-E?

The MicroView MVID-02IR-E has a weight of 500 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the MicroView MVID-02IR-E?

The MicroView MVID-02IR-E has a height of 82 mm.

Is the manual of the MicroView MVID-02IR-E available in English?

Yes, the manual of the MicroView MVID-02IR-E is available in English .

Is your question not listed? Ask your question here

No results