MicroView MVIC-01IR-E manual

MicroView MVIC-01IR-E
8.1 · 1
PDF manual
 · 172 pages
English
manualMicroView MVIC-01IR-E
Network Camera User Manual
32
PBC refers to the Push-Button-Configuration, in which the user simply has to push a
button, either an actual or virtual one (as the button on the configuration
interface of the IE browser), on both the Access Point (and a registrar of the network)
and the new wireless client device.
1. Check the checkbox of to enable WPS.
2. Choose the connection mode as PBC.
Note: Support of this mode is mandatory for both the Access Points and the connecting
devices.
3. Check on the Wi-Fi router to see if there is a WPS button. If yes push the button
and you can see the indicator near the button start flashing, which means the WPS
function of the router is enabled. For detailed operation, please see the user guide of the
router.
4. Push the WPS button to enable the function on the camera.
If there is not a WPS button on the camera, you can also click the virtual button to
enable the PBC function on the web interface.
5. Click Connect button.
When the PBC mode is both enabled in the router and the camera, the camera and the
wireless network is connected automatically.
PIN Mode:
The PIN mode requires a Personal Identification Number (PIN) to be read from either
a sticker or the display on the new wireless device. This PIN must then be entered to
connect the network, usually the Access Point of the network.
Steps:
1. Choose a wireless connection on the list and the SSID is loaded automatically.
2. Choose Use route PIN code.

Manual

View the manual for the MicroView MVIC-01IR-E here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the MicroView MVIC-01IR-E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the MicroView and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

MicroView MVIC-01IR-E specifications

Below you will find the product specifications and the manual specifications of the MicroView MVIC-01IR-E.

General
BrandMicroView
ModelMVIC-01IR-E | MVIC-01IR-E
Productsecurity camera
EAN5711783405092
LanguageEnglish
FiletypeUser manual (PDF)
Video
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Supported graphics resolutions1280 x 720 (HD 720),1280 x 960,1920 x 1080 (HD 1080)
Supported video modes1080p
Digital Wide Dynamic Range (DWDR)Yes
3D NR (Noise Reduction)Yes
Video streamingYes
Video formats supportedH.264, M-JPEG
Bit rate32 Kbps - 8 Mbps
Image quality adjustmentBrightness, Contrast, Saturation
Back Light Compensation (BLC)Yes
Image sensor
Sensor typeCMOS
Number of sensors1
Progressive scanYes
Optical sensor size1/2.8 "
Audio
Audio system2-way
Built-in microphoneYes
Built-in speaker(s)Yes
Audio formats supportedG.711, G.726
Lens system
Fixed focal length2.8 mm
Number of lenses1
Power
Power source typeDC, PoE
Power consumption (typical)4.5 W
Network
Wi-FiYes
Ethernet LANYes
Bluetooth-
Streaming methodMulticast
Quality of Service (QoS) supportYes
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, Q oS, IPv6, Bonjour
Ethernet interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Frequency band2.4 - 2.4835 GHz
Networking standardsIEEE 802.3af
Night vision
Night visionYes
Night vision distance10 m
Camera
Minimum illumination0.028 lx
Camera shutter speed1/3 - 1/100000 s
Storage
Card reader integratedYes
Built-in HDD-
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
Management features
Behavior analysisIntrusion detection, Line crossing detection
Security
Video motion detectionYes
Active tampering alarmYes
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Performance
Connectivity technologyWired
Alarm input/outputYes
TypeIP security camera
Placement supportedIndoor
Operational conditions
Operating temperature (T-T)-10 - 40 °C
Technical details
Integrated PIR sensorYes
Weight & dimensions
Width72.3 mm
Depth89.9 mm
Height131.3 mm
Weight400 g
Design
Form factor-
Product colorBlack, White
Mounting type-
Packaging content
Number of cameras1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the MicroView MVIC-01IR-E below.

What is the weight of the MicroView MVIC-01IR-E?

The MicroView MVIC-01IR-E has a weight of 400 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the height of the MicroView MVIC-01IR-E?

The MicroView MVIC-01IR-E has a height of 131.3 mm.

What is the width of the MicroView MVIC-01IR-E?

The MicroView MVIC-01IR-E has a width of 72.3 mm.

What is the depth of the MicroView MVIC-01IR-E?

The MicroView MVIC-01IR-E has a depth of 89.9 mm.

Is the manual of the MicroView MVIC-01IR-E available in English?

Yes, the manual of the MicroView MVIC-01IR-E is available in English .

Is your question not listed? Ask your question here

No results