MicroView MVIB-04IR-E manual

MicroView MVIB-04IR-E
7.2 · 1
PDF manual
 · 171 pages
English
manualMicroView MVIB-04IR-E
Network Camera User Manual
26
PBC refers to the Push-Button-Configuration, in which the user simply has to push a
button, either an actual or virtual one (as the button on the configuration
interface of the IE browser), on both the Access Point (and a registrar of the network)
and the new wireless client device.
1. Check the checkbox of to enable WPS.
2. Choose the connection mode as PBC.
Note: Support of this mode is mandatory for both the Access Points and the connecting
devices.
3. Check on the Wi-Fi router to see if there is a WPS button. If yes push the button
and you can see the indicator near the button start flashing, which means the WPS
function of the router is enabled. For detailed operation, please see the user guide of the
router.
4. Push the WPS button to enable the function on the camera.
If there is not a WPS button on the camera, you can also click the virtual button to
enable the PBC function on the web interface.
5. Click Connect button.
When the PBC mode is both enabled in the router and the camera, the camera and the
wireless network is connected automatically.
PIN Mode:
The PIN mode requires a Personal Identification Number (PIN) to be read from either
a sticker or the display on the new wireless device. This PIN must then be entered to
connect the network, usually the Access Point of the network.
Steps:
1. Choose a wireless connection on the list and the SSID is loaded automatically.
2. Choose Use route PIN code.

Manual

View the manual for the MicroView MVIB-04IR-E here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the MicroView MVIB-04IR-E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the MicroView and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

MicroView MVIB-04IR-E specifications

Below you will find the product specifications and the manual specifications of the MicroView MVIB-04IR-E.

General
BrandMicroView
ModelMVIB-04IR-E | MVIB-04IR-E
Productsecurity camera
EAN5711783978695
LanguageEnglish
FiletypeUser manual (PDF)
Video
Total megapixels4 MP
Maximum resolution2560 x 1440 pixels
Frame rate30 fps
Video streamingYes
3D NR (Noise Reduction)Yes
Video formats supportedH.264, H.264+, H.265, H.265+, M-JPEG
Bit rate32 Kbps - 8 Mbps
Supported graphics resolutions320 x 240,352 x 240,352 x 288,640 x 360,640 x 480 (VGA),1920 x 1080 (HD 1080),2304 x 1296,2560 x 1440
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Full HDYes
Privacy maskingYes
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/3 "
Progressive scanYes
Network
Streaming methodMulticast
Quality of Service (QoS) supportYes
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LANYes
Ethernet interface typeFast Ethernet
Wi-FiNo
BluetoothNo
Networking standardsIEEE 802.3at
Lens system
Focal length range2.8 - 12 mm
Auto focusYes
Maximum aperture number1.6
Number of lenses1
Power
Power source typeDC, PoE
Power consumption (typical)7.5 W
Design
International Protection (IP) codeIP67
IK codeIK10
WeatherproofYes
Protection featuresVandal proof
Product colorBlack, White
Form factorBullet
Mounting typeCeiling/wall
Night vision
Night visionYes
Night vision distance50 m
LED typeIR
Infra-red wavelength850 nm
Performance
Wide Dynamic Range (WDR)Yes
Infrared (IR) cut-off filterYes
Day/night modeYes
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Alarm input/outputYes
Camera
Minimum illumination0.018 lx
51 °
92 °
115 °
Pan range0 - 360 °
Angle of rotation360 °
Tilt angle range0 - 90 °
Audio
Audio formats supportedG.711, G.726
Storage
Card reader integratedYes
Built-in HDD-
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
Management features
Behavior analysisIntrusion detection, Line crossing detection
Web browserYes
Reset buttonYes
Security
Video motion detectionYes
Anti-flickerYes
HeartbeatYes
MirrorYes
Password protectionYes
IP address filteringYes
Other features
Number of simultaneous users32 user(s)
Packaging content
Number of cameras1
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Microphone inYes
BNC output ports1
Terminal block portYes
Operational conditions
Operating temperature (T-T)-30 - 60 °C
Weight & dimensions
Diameter144.1 mm
Depth332.7 mm
Weight1740 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the MicroView MVIB-04IR-E below.

What is the weight of the MicroView MVIB-04IR-E?

The MicroView MVIB-04IR-E has a weight of 1740 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the depth of the MicroView MVIB-04IR-E?

The MicroView MVIB-04IR-E has a depth of 332.7 mm.

Is the manual of the MicroView MVIB-04IR-E available in English?

Yes, the manual of the MicroView MVIB-04IR-E is available in English .

Is your question not listed? Ask your question here

No results