MicroView MVIB-04IR-E manual

MicroView MVIB-04IR-E
7.2 · 1
PDF manual
 · 171 pages
English
manualMicroView MVIB-04IR-E
Network Camera User Manual
140
Detection Configuration
Steps:
1. Select the detection type from the list. Vehicle Detection and Mixed-traffic
Detection are selectable.
Note: Reboot the device to activate the new settings when switching the detection
type of road traffic.
2. Check the checkbox of Enable to enable the selected detection function.
3. Select the lane number in the corresponding dropdown list. Up to 4 lanes are
selectable.
4. Click and drag the lane line to set its position, or click and drag the line end to adjust
the length and angle of the line.
5. Adjust the zoom ratio of the camera so that the size of the vehicle in the image is
close to that of the red frame. Only the position of red frame is adjustable.
Note: Only 1 license plate can be captured at one time for each lane.
6. Select a Province/State Abbreviation in the dropdown list when the attribution of
license plate cannot be recognized.
7. Set the Arming Schedule.
1) Click Arming Schedule to enter the arming schedule interface.
2) Click on the time bar and drag the mouse to select the time period.Click delete
or delete all to delete the configured schedule.
3) Move the mouse to the end of each day, a copy dialogue box pops up, and you
can copy the current settings to other days.
4) Click Save to save the settings.
Note: The time of each period cannot be overlapped. Up to 8 periods can be
configured for each day.
8. Set the linkage method. Notify surveillance center and upload to FTP/Memory
Card/NAS are selectable.
Notify Surveillance Center: Send an exception or alarm signal to remote
management software when an event occurs.
Upload to FTP/Memory Card/NAS: Capture the image when an alarm is

Manual

View the manual for the MicroView MVIB-04IR-E here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the MicroView MVIB-04IR-E or do you need help? Ask your question here

Index

Need help?

Do you have a question about the MicroView and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

MicroView MVIB-04IR-E specifications

Below you will find the product specifications and the manual specifications of the MicroView MVIB-04IR-E.

General
BrandMicroView
ModelMVIB-04IR-E | MVIB-04IR-E
Productsecurity camera
EAN5711783978695
LanguageEnglish
FiletypeUser manual (PDF)
Video
Total megapixels4 MP
Maximum resolution2560 x 1440 pixels
Frame rate30 fps
Video streamingYes
3D NR (Noise Reduction)Yes
Video formats supportedH.264, H.264+, H.265, H.265+, M-JPEG
Bit rate32 Kbps - 8 Mbps
Supported graphics resolutions320 x 240,352 x 240,352 x 288,640 x 360,640 x 480 (VGA),1920 x 1080 (HD 1080),2304 x 1296,2560 x 1440
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Full HDYes
Privacy maskingYes
Image sensor
Sensor typeCMOS
Number of sensors1
Optical sensor size1/3 "
Progressive scanYes
Network
Streaming methodMulticast
Quality of Service (QoS) supportYes
Supported network protocolsTCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Ethernet LANYes
Ethernet interface typeFast Ethernet
Wi-FiNo
BluetoothNo
Networking standardsIEEE 802.3at
Lens system
Focal length range2.8 - 12 mm
Auto focusYes
Maximum aperture number1.6
Number of lenses1
Power
Power source typeDC, PoE
Power consumption (typical)7.5 W
Design
International Protection (IP) codeIP67
IK codeIK10
WeatherproofYes
Protection featuresVandal proof
Product colorBlack, White
Form factorBullet
Mounting typeCeiling/wall
Night vision
Night visionYes
Night vision distance50 m
LED typeIR
Infra-red wavelength850 nm
Performance
Wide Dynamic Range (WDR)Yes
Infrared (IR) cut-off filterYes
Day/night modeYes
TypeIP security camera
Placement supportedOutdoor
Connectivity technologyWired
Alarm input/outputYes
Camera
Minimum illumination0.018 lx
51 °
92 °
115 °
Pan range0 - 360 °
Angle of rotation360 °
Tilt angle range0 - 90 °
Audio
Audio formats supportedG.711, G.726
Storage
Card reader integratedYes
Built-in HDD-
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
Management features
Behavior analysisIntrusion detection, Line crossing detection
Web browserYes
Reset buttonYes
Security
Video motion detectionYes
Anti-flickerYes
HeartbeatYes
MirrorYes
Password protectionYes
IP address filteringYes
Other features
Number of simultaneous users32 user(s)
Packaging content
Number of cameras1
Ports & interfaces
Ethernet LAN (RJ-45) ports1
Microphone inYes
BNC output ports1
Terminal block portYes
Operational conditions
Operating temperature (T-T)-30 - 60 °C
Weight & dimensions
Diameter144.1 mm
Depth332.7 mm
Weight1740 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the MicroView MVIB-04IR-E below.

What is the weight of the MicroView MVIB-04IR-E?

The MicroView MVIB-04IR-E has a weight of 1740 g.

What is a megapixel?

The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.

What does the abbreviation 'MP' stand for?

MP stands for MegaPixels.

What is the depth of the MicroView MVIB-04IR-E?

The MicroView MVIB-04IR-E has a depth of 332.7 mm.

Is the manual of the MicroView MVIB-04IR-E available in English?

Yes, the manual of the MicroView MVIB-04IR-E is available in English .

Is your question not listed? Ask your question here

No results