We declare in our sole responsibility: These angle
grinders, identified by type and serial number *1),
comply with all relevant requirements of the direc-
tives *2) and standards *3). Technical file at *4) -
see page 3.
Machines fitted with original Metabo accessories
are suitable for grinding, sanding, separating and
wire brushing metal, concrete, stone and similar
materials without the use of water.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions.Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference. Pass on your electrical tool only
together with these documents.
4.1Safety Warnings Common for Grinding,
Sanding, Wire Brushing or Abrasive
Cutting-Off Operations:
Use
a) This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read
all safety warnings, instructions, illustrations
and specifications provided with this power
tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
injury.
b) Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
c) Do not use accessories which are not
specifically designed and recommended by the
tool manufacturer. Just because the accessory
can be attached to your power tool, it does not
assure safe operation.
d) The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool. Accessories running faster than
their rated speed can break and fly apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or
controlled.
f) The arbour size of wheels, flanges, backing
pads or any other accessory must properly fit
the spindle of the power tool. Accessories with
arbour holes that do not match the mounting
hardware of the power tool will run out of balance,
vibrate excessively and may cause loss of control.
g) Do not use a damaged accessory. Before
each use inspect the accessory such as
abrasive wheels for chips and cracks, backing
pad for cracks, tear or excess wear, wire brush
for loose or cracked wires. If a power tool or
accessory is dropped, inspect for damage or
install an undamaged accessory. After
inspecting and installing an accessory,
position yourself and bystanders away from
the plane of the rotating accessory and run the
power tool at maximum no-load speed for one
minute. Damaged accessories will normally break
apart during this test time.
h) Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As
appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments. The eye protection must be
capable of stopping flying debris generated by
various operations. The dust mask or respirator
must be capable of filtering particles generated by
your operation. Prolonged exposure to high
intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from
work area. Anyone entering the work area must
wear personal protective equipment. Fragments
of workpiece or of a broken accessory may fly away
and cause injury beyond immediate area of
operation.
j) Hold power tool by insulated gripping
surfaces only, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. A cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
give the operator an electric shock.
k) Position the cord clear of the spinning
accessory. If you lose control, the cord may be cut
or snagged and your hand or arm may be pulled into
the spinning accessory.
I) Never lay the power tool down until the
accessory has come to a complete stop. The
1. Conformity Declaration
2. Specified Use
3. General Safety Instructions
4. Special Safety Instructions
Manual
View the manual for the Metabo WX 2000-230 here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Metabo WX 2000-230 or do you need help? Ask your question here
Do you have a question about the Metabo and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 1
G
Grzegorz GierczakNovember 24, 2020
hello, Can tripods and stands be used with Metabo grinders? I am an occupational health and safety employee and I have a dilemma whether I can allow such additional equipment for work. Can the manufacturer or service provide any guidance on this matter? regards Grzegorz Gierczak
This message has been automatically translated
Metabo WX 2000-230 specifications
Below you will find the product specifications and the manual specifications of the Metabo WX 2000-230.
The Metabo WX 2000-230 is a grinder designed for heavy-duty cutting and grinding tasks. With a power output of 2000 watts and a disc diameter of 230 mm, this grinder is capable of tackling tough materials with ease. It features a robust construction, making it suitable for professional use in various industries.
Equipped with a side handle for improved control and stability during operation, the Metabo WX 2000-230 ensures safe and precise cutting and grinding. The tool is designed to provide a comfortable grip for extended use without causing fatigue to the user.
This grinder is equipped with a spindle lock for quick and easy disc changes, enhancing efficiency and productivity on the job. The Metabo WX 2000-230 is built with quality components to ensure reliable performance and longevity.
Overall, the Metabo WX 2000-230 is a powerful and durable grinder that is suitable for demanding tasks in industrial and professional settings.
Need help?
Do you have a question about the Metabo and is the answer not in the manual?
Question and answer
Number of questions: 1hello, Can tripods and stands be used with Metabo grinders? I am an occupational health and safety employee and I have a dilemma whether I can allow such additional equipment for work. Can the manufacturer or service provide any guidance on this matter? regards Grzegorz Gierczak
This message has been automatically translated