Metabo WP 9-125 Quick manual

Metabo WP 9-125 Quick
9.3 · 1
PDF manual
 · 124 pages
English
manualMetabo WP 9-125 Quick

ENGLISH en

15

Original instructions

We, being solely responsible: Hereby declare that
these angle grinders, identified by type and serial
number *1), meet all relevant requirements of
directives *2) and standards *3). technical
documents for *4) - see Page 4.
The angle grinders, when fitted with original Metabo
accessories, are suitable for grinding, sanding,
abrasive cutting-off operations and wire brushing
metal, concrete, stone and similar materials without
the use of water.
WEV 15-125 Quick HT, WEV 15-125 Quick Inox is
additionally suited for light polishing work. We
recommend using our angle polisher for demanding
polishing work in continuous operation.
Machines with the designation WEV are particularly
suited for working with wire brushes due to
thumbwheel for speed selection.
The user bears sole responsibility for any damage
caused by inappropriate use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating
instructions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety
warnings and instructions may result in electric
shock, fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your power tool only together with these
documents.
4.1 Safety Warnings Common for Grinding,
Sanding, Wire Brushing or Abrasive
Cutting-Off Operations:
Use
a) This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read
all safety warnings, instructions, illustrations
and specifications provided with this power
tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious
injury. WEV 15-125 Quick HT, WEV 15-125 Quick
Inox can also be used as polishing tool.
b) Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury. (Does not apply to WEV 15-125 Quick HT,
WEV 15-125 Quick Inox.)
c) Do not use accessories which are not
specifically designed and recommended by the
tool manufacturer. Just because the accessory
can be attached to your power tool, it does not
assure safe operation.
d) The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool. Accessories running faster than
their rated speed can break and fly apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or
controlled.
f) Treaded mounting of accessories must
match the grinder spindle thread. For
accessories mounted by flanges, the arbour
hole of the accessory must fit the locating
diameter of the flange. Accessories that do not
match the mounting hardware of the power tool
will run out of balance, vibrate excessively and
may cause loss of control.
g) Do not use a damaged accessory. Before
each use inspect the accessory such as
abrasive wheels for chips and cracks, backing
pad for cracks, tear or excess wear, wire brush
for loose or cracked wires. If power tool or
accessory is dropped, inspect for damage or
install an undamaged accessory. After
inspecting and installing an accessory,
position yourself and bystanders away from
the plane of the rotating accessory and run the
power tool at maximum no-load speed for one
minute. Damaged accessories will normally break
apart during this test time.
h) Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As
appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments. The eye protection must be
capable of stopping flying debris generated by
various operations. The dust mask or respirator
must be capable of filtrating particles generated by
your operation. Prolonged exposure to high
intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from
work area. Anyone entering the work area must
wear personal protective equipment. Fragments
of workpiece or of a broken accessory may fly away
and cause injury beyond immediate area of
operation.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

Manual

View the manual for the Metabo WP 9-125 Quick here, for free. This manual comes under the category grinders and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Metabo WP 9-125 Quick or do you need help? Ask your question here

Need help?

Do you have a question about the Metabo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Metabo WP 9-125 Quick specifications

Below you will find the product specifications and the manual specifications of the Metabo WP 9-125 Quick.

The Metabo WP 9-125 Quick is a grinder with a 125 mm grinding disc diameter, designed for various grinding and sanding applications. It features a powerful output power of 550 W and an input power of 900 W, ensuring efficient performance. The grinder operates at an idle speed of up to 10500 RPM, allowing for quick and precise work. Equipped with a 4-meter long cable, this grinder offers flexibility and freedom of movement during operation. The spindle thread is M14, providing compatibility with a wide range of accessories. The maximum torque of 2.5 N⋅m ensures optimal force transmission for effective grinding. In terms of noise, the Metabo WP 9-125 Quick produces a sound pressure level of 91 dB and a sound power level of 102 dB, with an uncertainty of 3 dB. This grinder has a vibration level of 6 m/s² during grinding, with an uncertainty of 1.5 m/s². For sanding applications, the vibration level is 2.5 m/s², also with an uncertainty of 1.5 m/s². The Metabo WP 9-125 Quick is constructed with high-quality materials, ensuring reliability and durability over time. Its sturdy design and powerful performance make it a suitable tool for both professional and DIY use. Overall, the Metabo WP 9-125 Quick is a versatile and efficient grinder, offering power and precision for various grinding and sanding tasks. It provides a long cable for convenient maneuverability and is built to withstand the demands of regular use.

General
BrandMetabo
ModelWP 9-125 Quick | 600384000
Productgrinder
EAN4007430244949
LanguageEnglish
FiletypeUser manual (PDF)
Power
Cable length4 m
Output power550 W
Input power900 W
AC input voltage220-240 V
AC input frequency50 - 60 Hz
Power sourceAC
Performance
Idle speed (max)10500 RPM
Grinding disc diameter125 mm
Torque (max)2.5 N⋅m
Spindle threadM14
Sound pressure level91 dB
Sound power level102 dB
Vibration level (grinding)6 m/s²
Vibration level uncertainty (grinding)1.5 m/s²
Vibration level (sanding)2.5 m/s²
Vibration level uncertainty (sanding)1.5 m/s²
Other features
Sound power level uncertainty3 dB
Features
Product colorBlack, Green, Grey, Red
Weight & dimensions
Weight2100 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Metabo WP 9-125 Quick below.

What is the weight of the Metabo WP 9-125 Quick?

The Metabo WP 9-125 Quick has a weight of 2100 g.

Is the manual of the Metabo WP 9-125 Quick available in English?

Yes, the manual of the Metabo WP 9-125 Quick is available in English .

Is your question not listed? Ask your question here

No results