View the manual for the Metabo KHE 2860 Quick here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Metabo KHE 2860 Quick or do you need help? Ask your question here


Below you will find the product specifications and the manual specifications of the Metabo KHE 2860 Quick.
| Brand | Metabo |
| Model | KHE 2860 Quick | 600878500 |
| Product | drill machine |
| EAN | 4007430306609 |
| Language | English |
| Filetype | User manual (PDF) |
| Product color | Black, Green, Red, Silver |
| Chuck type | SDS Plus |
| Drilling | Yes |
| Hammer drilling | Yes |
| Chiseling | Yes |
| Quick release system | Yes |
| Impact energy (max) | 3.2 J |
| Rated speed (max) | 870 RPM |
| Impact rate | 4400 bpm |
| Drilling diameter in concrete (max) | 28 mm |
| Drilling diameter in stone (max) | 68 mm |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Idle speed (max) | 1150 RPM |
| Spindle collar diameter | 50 mm |
| Vibration level (hammer drilling) | 12.9 m/s² |
| Vibration level (chiseling) | 8.5 m/s² |
| Vibration level uncertainty (chiseling) | 1.5 m/s² |
| Sound pressure level | 89 dB |
| Sound power level | 99 dB |
| Sound level uncertainty | 3 dB |
| Input power | 880 W |
| Cord length | 4 m |
| Power source | AC |
| Weight | 3100 g |
| On/off switch | Yes |
| Uncertainty coefficient (concrete) | 2.4 m/s² |
| Keyless chuck | Yes |
| Depth gauge included | Yes |
| Carrying case | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Metabo KHE 2860 Quick below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Metabo KHE 2860 Quick has a weight of 3100 g.
Yes, the Metabo KHE 2860 Quick has a chuck type of SDS Plus. This allows for easy and secure bit changes, providing convenience and versatility for the user.
Yes, the Metabo KHE 2860 Quick can be used for chiseling. This feature expands the tool's functionality, making it suitable for various construction and renovation tasks.
The Metabo KHE 2860 Quick has a maximum impact energy of 3.2 J. This indicates that it is capable of delivering powerful impact forces, allowing for efficient drilling and chiseling in tough materials.
The Metabo KHE 2860 Quick has a maximum drilling diameter of 28 mm in concrete. This size is suitable for most common drilling applications in concrete, providing versatility for the user.
Yes, the Metabo KHE 2860 Quick has an on/off switch. This feature allows for easy control and operation of the tool, enhancing user safety and convenience.
To determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine, you can refer to the specifications provided in the manual. The maximum drilling diameter is denoted as "ømax" in the technical specifications. Here are the steps to find the maximum drilling diameter: 1. Locate the page in the manual that contains the technical specifications. In the English manual, this information is on page 3. 2. Look for the parameter labeled "ømax" in the specifications. This represents the maximum drill diameter that the Metabo KHE 2860 Quick drill machine can handle. 3. Note down the value mentioned next to "ømax". This value indicates the maximum drilling diameter in millimeters. By following these steps, you can easily determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine without referring to the manual directly.
To adjust the impact frequency of the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Locate the control button or switch that allows you to adjust the impact frequency. This button is usually labeled with symbols or text indicating the impact mode. 2. Depending on the model of the drill machine, the control button may be located on the side or the top of the drill body. Look for a button that is easily accessible and within reach of your fingers. 3. Press or slide the control button to switch between different impact frequencies. Some drill machines may have multiple impact modes, such as a high impact frequency for drilling into hard materials and a lower impact frequency for softer materials. 4. As you press or slide the control button, you will feel or hear a click indicating the change in impact frequency. Pay attention to the feedback from the drill machine to ensure that the desired impact frequency is selected. 5. Once you have adjusted the impact frequency, you can proceed with your drilling task. Remember to use appropriate drill bits and accessories suitable for the selected impact frequency. By following these steps, you can easily adjust the impact frequency of the Metabo KHE 2860 Quick drill machine without referring to the manual directly.
The recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine are mentioned in the manual. However, I cannot directly access the manual. To find the recommended accessories, you can refer to the accessories section of the manual or the Metabo website. In the accessories section, you will find a list of compatible accessories specifically designed for the Metabo KHE 2860 Quick drill machine. These accessories are recommended by Metabo to ensure optimal performance and safety while using the drill machine. To access the accessories section, locate the corresponding page in the manual. The page number may vary depending on the language of the manual. Look for headings such as "Accessories" or "Recommended Accessories" to find the relevant information. Alternatively, you can visit the Metabo website and search for the accessories section for the Metabo KHE 2860 Quick drill machine. The website will provide a comprehensive list of genuine Metabo accessories compatible with the drill machine. By referring to the manual or the Metabo website, you can easily find the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine.
To securely attach accessories to the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Ensure that the drill machine is turned off and unplugged from the power source for safety. 2. Identify the accessory attachment point on the drill machine. This is usually located at the front of the drill, near the chuck. 3. Select the appropriate accessory for your desired application, such as a drill bit or screwdriver bit. 4. Align the accessory with the attachment point, ensuring that the shank of the accessory matches the size and type of the chuck. 5. Insert the accessory into the chuck, making sure it is fully seated and secure. 6. Tighten the chuck by rotating it in a clockwise direction. Use the chuck key or the built-in chuck tightening mechanism, depending on the design of your drill machine. 7. Continue tightening until the accessory is firmly held in place and cannot be easily rotated or removed. 8. Double-check the tightness of the accessory by giving it a gentle tug to ensure it is securely attached. By following these steps, you can securely attach accessories to the Metabo KHE 2860 Quick drill machine without referring to the manual directly.
If the Metabo KHE 2860 Quick drill machine requires repairs, follow these steps: 1. Ensure the drill machine is turned off and unplugged from the power source for safety. 2. Identify the issue or problem with the drill machine. This could be a malfunctioning component, a broken part, or any other repairable issue. 3. Check the warranty information provided with the drill machine. If the drill machine is still under warranty, contact the authorized service center or Metabo customer support for assistance. 4. If the drill machine is not under warranty or the issue is not covered by the warranty, locate the nearest authorized Metabo service center or a qualified repair technician. 5. Contact the service center or repair technician to explain the issue and schedule a repair appointment. 6. Bring the drill machine to the authorized service center or arrange for the repair technician to visit your location, depending on the service options available. 7. Provide the necessary information, such as the model number (Metabo KHE 2860 Quick) and a description of the issue, to the service center or repair technician. 8. Follow the instructions provided by the service center or repair technician regarding the repair process, estimated timeline, and any associated costs. By following these steps, you can address any repair needs for the Metabo KHE 2860 Quick drill machine.
Yes, the manual of the Metabo KHE 2860 Quick is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Metabo and is the answer not in the manual?
Question and answer
Number of questions: 0