Metabo KHE 2860 Quick manual

Metabo KHE 2860 Quick
8.9 · 3
PDF manual
 · 100 pages
English
manualMetabo KHE 2860 Quick

ČESKYcs

78
Prohlašujeme na vlastní odpovědnost: Tato vrtací
a sekací kladiva, identifikovaná podle typu a
sériového čísla *1), splňují všechna platná
ustanovení směrnic *2) a norem *3). Technická
dokumentace u *4) – viz strana 3.
Vrtací a sekací kladiva s adekvátním
příslušenstvím jsou vhodná pro práce s
kladivovými vrtáky a sekáči do betonu, kamene a
podobných materiálů a s vrtacími korunkami do
cihel a podobně, jakož i pro vrtání bez příklepu do
kovu, dřeva atd. a pro šroubování.
Za škody způsobené použitím, které je v rozporu
s určeným účelem, přebírá zodpovědnost pouze
uživatel.
Je nutné dodržovat všeobecně uznávané předpisy
pro ochranu před úrazem a přiložené bezpečnostní
pokyny.
Pozor na místa v textu označená tímto
symbolem, slouží k vaší bezpečnosti
a k ochraně vašeho elektrického nářadí!
VÝSTRAHA – Za účelem minimalizace
nebezpečí poranění si přečtěte návod
k použití.
VÝSTRAHA Přečtěte si všechny
bezpečnostní pokyny a instrukce.

Nedodržování všech níže uvedených pokynů může

mít za následek úraz elektrickým proudem, požár

a/nebo těžké poranění.

Všechny pokyny a výstrahy uchovejte pro
budoucí potřebu.
Předávejte vaše elektrické nářadí jen společně
s těmito dokumenty.
Používejte ochranu sluchu. Vlivem hluku může
dojít ke ztrátě sluchu.
Používejte přídavnou rukojeť, která je součástí
dodávky nářadí. Ztráta kontroly nad nářadím
může způsobit poranění.
Pokud provádíte práce, při kterých může vložný
nástroj narazit na skrytá elektrická vedení nebo
na vlastní síťový kabel, držte nářadí za
izolované rukojeti. Při kontaktu s vedením pod
napětím se může napětí přenést i do kovových
částí nářadí, a to může způsobit úraz elektrickým
proudem.
Pracujte jen se správně připevněnou přídavnou
rukojetí.
Nářadí vždy držte pevně oběma rukama za
příslušné rukojeti, zaujměte bezpečný postoj
a soustřeďte se na práci.
Při práci s elektrickým nářadím noste vždy
ochranné brýle, pracovní rukavice a pevnou obuv!
Zkontrolujte, zda se na místě, kde chcete vrtat
nebo šroubovat, nenachází žádné elektrické,
vodovodní nebo plynové vedení (např. pomocí
detektoru kovů).
Při zareagování bezpečnostní spojky zařízení
ihned vypněte!
Nedotýkejte se otáčejícího se vložného nástroje!
Obrobek zajistěte proti posunutí nebo otáčení
(např. upnutím svěrkou).
Piliny, třísky a podobně odstraňujte jen tehdy,
pokud je nářadí v klidovém stavu.
Pozor při tuhém šroubovém spoji (šroubování
šroubů s metrickým nebo palcovým závitem do
oceli)! Hlava šroubu se může utrhnout, resp.
mohou na rukojeť působit vysoké zpětné momenty.
Než provedete jakékoliv nastavení, přestrojení,
údržbu nebo čištění, vytáhněte zástrčku ze
zásuvky.
Zabraňte neúmyslnému spuštění: Vždy odjistěte
spínač, pokud vytáhnete síťovou zástrčku ze
zásuvky nebo pokud dojde k přerušení napájení.
Poškozenou nebo popraskanou přídavnou rukojeť
je nutno vyměnit. Nepoužívejte nářadí
s poškozenou přídavnou rukojetí.
Bezpečnostní aretační spojka: Pokud se vložný
nástroj zasekne nebo zachytí, tok energie k motoru
se omezí. Kvůli vysoké síle, která přitom vzniká,
držte nářadí vždy oběma rukama za příslušné
rukojeti, zaujměte bezpečný postoj a soustřeďte se
na práci.
Snižování prašnosti:
VAROVÁNÍ - Některé druhy prachu, které
vznikají při broušení smirkovým papírem,
pilování, broušení, vrtání a jiných pracích, obsahují
chemikálie, o nichž je známo, že způsobují
rakovinu, vrozené vady nebo jiná poškození
rozmnožování. Několik příklad těchto chemikálií
jsou:
- olovo z olovnatého nátěru
- minerální prach z cihel, cementu a jiných
materiálů zdiva a
- arzén a chrom z chemicky ošetřeného dřeva.
Vaše riziko způsobené touto zátěží se odlišuje v
závislosti na tom, jak často provádíte tento druh
práce. Chcete-li snížit zatížení těmito
chemikáliemi: Pracujte v dobře větraných
prostorech a se schválenými ochrannými
pracovními prostředky, jako jsou např. prachové
masky, které byly speciálně vyvinuty k odfiltrování
mikroskopických částic.
To se vztahuje i na prachy z jiných materiálů, např.
některé druhy dřeva (jako je dubový nebo bukový

Původní návod k používání

1. Prohlášení o shodě

2. Použití v souladu s určeným

účelem

3. Všeobecné bezpečnostní

pokyny

4. Speciální bezpečnostní

pokyny

Manual

View the manual for the Metabo KHE 2860 Quick here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Metabo KHE 2860 Quick or do you need help? Ask your question here

Need help?

Do you have a question about the Metabo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Metabo KHE 2860 Quick specifications

Below you will find the product specifications and the manual specifications of the Metabo KHE 2860 Quick.

General
BrandMetabo
ModelKHE 2860 Quick | 600878500
Productdrill machine
EAN4007430306609
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack, Green, Red, Silver
Chuck typeSDS Plus
DrillingYes
Hammer drillingYes
ChiselingYes
Quick release systemYes
Performance
Impact energy (max)3.2 J
Rated speed (max)870 RPM
Impact rate4400 bpm
Drilling diameter in concrete (max)28 mm
Drilling diameter in stone (max)68 mm
Drilling diameter in wood (max)32 mm
Drilling diameter in steel (max)13 mm
Idle speed (max)1150 RPM
Spindle collar diameter50 mm
Vibration level (hammer drilling)12.9 m/s²
Vibration level (chiseling)8.5 m/s²
Vibration level uncertainty (chiseling)1.5 m/s²
Sound pressure level89 dB
Sound power level99 dB
Sound level uncertainty3 dB
Power
Input power880 W
Cord length4 m
Power sourceAC
Weight & dimensions
Weight3100 g
Other features
On/off switchYes
Uncertainty coefficient (concrete)2.4 m/s²
Packaging content
Keyless chuckYes
Depth gauge includedYes
Carrying caseYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Metabo KHE 2860 Quick below.

How do I remove rust from my Metabo drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a weight of 3100 g.

Does the Metabo KHE 2860 Quick have a chuck type of SDS Plus?

Yes, the Metabo KHE 2860 Quick has a chuck type of SDS Plus. This allows for easy and secure bit changes, providing convenience and versatility for the user.

Can the Metabo KHE 2860 Quick be used for chiseling?

Yes, the Metabo KHE 2860 Quick can be used for chiseling. This feature expands the tool's functionality, making it suitable for various construction and renovation tasks.

What is the impact energy (max) of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum impact energy of 3.2 J. This indicates that it is capable of delivering powerful impact forces, allowing for efficient drilling and chiseling in tough materials.

What is the drilling diameter in concrete (max) for the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum drilling diameter of 28 mm in concrete. This size is suitable for most common drilling applications in concrete, providing versatility for the user.

Does the Metabo KHE 2860 Quick have an on/off switch?

Yes, the Metabo KHE 2860 Quick has an on/off switch. This feature allows for easy control and operation of the tool, enhancing user safety and convenience.

How do I determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine?

To determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine, you can refer to the specifications provided in the manual. The maximum drilling diameter is denoted as "ømax" in the technical specifications. Here are the steps to find the maximum drilling diameter: 1. Locate the page in the manual that contains the technical specifications. In the English manual, this information is on page 3. 2. Look for the parameter labeled "ømax" in the specifications. This represents the maximum drill diameter that the Metabo KHE 2860 Quick drill machine can handle. 3. Note down the value mentioned next to "ømax". This value indicates the maximum drilling diameter in millimeters. By following these steps, you can easily determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

How do I adjust the impact frequency of the drill machine?

To adjust the impact frequency of the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Locate the control button or switch that allows you to adjust the impact frequency. This button is usually labeled with symbols or text indicating the impact mode. 2. Depending on the model of the drill machine, the control button may be located on the side or the top of the drill body. Look for a button that is easily accessible and within reach of your fingers. 3. Press or slide the control button to switch between different impact frequencies. Some drill machines may have multiple impact modes, such as a high impact frequency for drilling into hard materials and a lower impact frequency for softer materials. 4. As you press or slide the control button, you will feel or hear a click indicating the change in impact frequency. Pay attention to the feedback from the drill machine to ensure that the desired impact frequency is selected. 5. Once you have adjusted the impact frequency, you can proceed with your drilling task. Remember to use appropriate drill bits and accessories suitable for the selected impact frequency. By following these steps, you can easily adjust the impact frequency of the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What are the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine?

The recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine are mentioned in the manual. However, I cannot directly access the manual. To find the recommended accessories, you can refer to the accessories section of the manual or the Metabo website. In the accessories section, you will find a list of compatible accessories specifically designed for the Metabo KHE 2860 Quick drill machine. These accessories are recommended by Metabo to ensure optimal performance and safety while using the drill machine. To access the accessories section, locate the corresponding page in the manual. The page number may vary depending on the language of the manual. Look for headings such as "Accessories" or "Recommended Accessories" to find the relevant information. Alternatively, you can visit the Metabo website and search for the accessories section for the Metabo KHE 2860 Quick drill machine. The website will provide a comprehensive list of genuine Metabo accessories compatible with the drill machine. By referring to the manual or the Metabo website, you can easily find the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine.

How do I securely attach accessories to the drill machine?

To securely attach accessories to the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Ensure that the drill machine is turned off and unplugged from the power source for safety. 2. Identify the accessory attachment point on the drill machine. This is usually located at the front of the drill, near the chuck. 3. Select the appropriate accessory for your desired application, such as a drill bit or screwdriver bit. 4. Align the accessory with the attachment point, ensuring that the shank of the accessory matches the size and type of the chuck. 5. Insert the accessory into the chuck, making sure it is fully seated and secure. 6. Tighten the chuck by rotating it in a clockwise direction. Use the chuck key or the built-in chuck tightening mechanism, depending on the design of your drill machine. 7. Continue tightening until the accessory is firmly held in place and cannot be easily rotated or removed. 8. Double-check the tightness of the accessory by giving it a gentle tug to ensure it is securely attached. By following these steps, you can securely attach accessories to the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What should I do if the drill machine requires repairs?

If the Metabo KHE 2860 Quick drill machine requires repairs, follow these steps: 1. Ensure the drill machine is turned off and unplugged from the power source for safety. 2. Identify the issue or problem with the drill machine. This could be a malfunctioning component, a broken part, or any other repairable issue. 3. Check the warranty information provided with the drill machine. If the drill machine is still under warranty, contact the authorized service center or Metabo customer support for assistance. 4. If the drill machine is not under warranty or the issue is not covered by the warranty, locate the nearest authorized Metabo service center or a qualified repair technician. 5. Contact the service center or repair technician to explain the issue and schedule a repair appointment. 6. Bring the drill machine to the authorized service center or arrange for the repair technician to visit your location, depending on the service options available. 7. Provide the necessary information, such as the model number (Metabo KHE 2860 Quick) and a description of the issue, to the service center or repair technician. 8. Follow the instructions provided by the service center or repair technician regarding the repair process, estimated timeline, and any associated costs. By following these steps, you can address any repair needs for the Metabo KHE 2860 Quick drill machine.

Is the manual of the Metabo KHE 2860 Quick available in English?

Yes, the manual of the Metabo KHE 2860 Quick is available in English .

Is your question not listed? Ask your question here

No results