Metabo KHE 2860 Quick manual

Metabo KHE 2860 Quick
8.9 · 3
PDF manual
 · 100 pages
English
manualMetabo KHE 2860 Quick

NORSKno

40
Vi erklærer under eget ansvar: Disse bore- og
meiselhammerne, identifisert med type- og
serienummer *1), overholder alle relevante
bestemmelser i direktivene *2) og standardene *3).
Teknisk dokumentasjon ved *4) – se side 3.
Med riktig tilbehør er bor- og meilsenhammerne
egnet til arbeide med hammerbor og meisler i
betong, stein og tilsvarende materialer og med
borkrone i tegl og lignende, samt til å bore uten slag
i metall, tre osv. og å brukes til å skru med.
Brukeren er alene ansvarlig for skader som måtte
oppstå pga. uhensiktsmessig bruk.
Generelt gjeldende arbeidsmiljøforskrifter og
vedlagte sikkerhetsinformasjon må overholdes.
For din egen sikkerhet og for å beskytte
maskinen, er det viktig at du tar hensyn til
tekst som er merket med dette symbolet.
ADVARSEL – Les bruksanvisningen for å
minimere skaderisikoen.
ADVARSEL Les gjennom all
sikkerhetsinformasjon og alle
anvisninger. Dersom sikkerhetsinformasjonen og
anvisningene ikke overholdes, kan det medføre
elektrisk støt, brann og/eller alvorlige skader.
Oppbevar all sikkerhetsinformasjon og alle
anvisninger for fremtidig bruk.
Lån bare ut elektroverktøyet ditt sammen med disse
dokumentene.
Bruk hørselvern. Eksponering for støy kan føre til
hørselstap.
Bruk støttehåndtakene som følger med
maskinen. Tap av kontroll kan føre til skader.
Hold i de isolerte håndtakene på maskinen når
du utfører arbeider der maskinen kan komme i
kontakt med skjulte strømledninger eller sin
egen kabel. Kontakt med spenningsførende
ledning kan sette metalldeler i maskinen under
spenning og føre til elektrisk støt.
Arbeid bare med riktig montert støttehåndtak.
Hold alltid maskinen med begge hender i de to
håndtakene. Stå med god balanse og arbeid
konsentrert.
Bruk alltid vernebriller, arbeidshansker og
ordentlige sko når du arbeider med
elektroverktøyet.
Kontroller at det ikke finnes strøm-, vann- eller
gassledninger på stedet der du skal arbeide (for
eksempel ved hjelp av en metalldetektor).
Slå av maskinen øyeblikkelig når
sikkerhetskoblingen slår inn.
Ikke ta på roterende verktøy!
Verktøyet må sikres mot forskyving eller å dreies
med (f.eks. ved å stramme med tvinger).
Spon o.l. må kun fjernes når maskinen er stoppet.
Vær forsiktig ved grovgjengede skruer (innskruing
av stålskruer med metrisk gjenging eller
tommegjenging)! Skruehodet kan rives av, eller det
kan oppstå et kraftig tilbakeslag i håndtaket.
Trekk støpselet ut av stikkontakten før alle former
for innstilling, montering, vedlikehold og rengjøring.
Unngå utilsiktet start: Frigjør alltid bryteren når
støpselet tas ut av stikkontakten eller ved
strømbrudd.
Skift ut støttehåndtak som har skader eller sprekker.
Ikke bruk maskiner med defekt støttehåndtak.
Sikkerhetskobling: Motorkraften begrenses hvis
verktøyet haker seg fast. På grunn av de høye
kreftene som da oppstår, må maskinen alltid holdes
med begge hendene i de to håndtakene. Stå med
god balanse og arbeid konsentrert.
Redusert støvbelastning:
ADVARSEL - Enkelte typer støv, som oppstår
ved sliping med sandpapir, saging, sliping,
boring og andre arbeider, inneholder kjemikalier
som kan fremkalle kreft, fødselsskader eller andre
reproduksjonsskader. Eksempler på slike
kjemikalier er:
- bly fra blyholdig maling,
- mineralstøv fra murstein, sement og andre
murermaterialer og
- arsen og krom fra kjemisk behandlet treverk.
Hvor stor risikoen fra disse stoffene er for deg,
avhenger av hvor ofte du utfører denne typen
arbeider. For å redusere belastningen fra slike
kjemikalier: arbeid i lokaler med god utlufting og
bruk alltid godkjent verneutstyr, som f.eks.
åndemasker med spesialfilter for mikroskopiske
partikler.
Dette gjelder også for støv fra andre typer
materialer, som f.eks. enkelte typer treverk (som eik
eller bøk), metaller og asbest. Andre kjente
sykdommer er f.eks. allergiske reaksjoner. La ikke
støv trenge inn i kroppen.
Følg de rutinene og nasjonale forskriftene som
gjelder for omgang med materialer, personale,
bruksområde og -sted.
Samle løse partikler der de oppstår; unngå
nedfelling i omgivelsene.
Bruk egnet tilbehør til spesielle arbeidsoppgaver Da
hindrer du at partiklene havner i omgivelsene.
Bruk et egnet avsug.
Minimer støvbelastningen ved å:
- unngå å rette partikkelstrømmen / utblåsingsluften
fra maskinen mot deg selv eller andre, eller mot
nedfelt støv,
- bruke et avsug og/eller en luftrenser,
- holde arbeidsplassen ren og godt utluftet. Feiing
og blåsing virvler opp støvet.

Original instruksjonsbok

1. Samsvarserklæring

2. Forskriftsmessig bruk

3. Generelle

sikkerhetsanvisninger

4. Spesiell

sikkerhetsinformasjon

Manual

View the manual for the Metabo KHE 2860 Quick here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Metabo KHE 2860 Quick or do you need help? Ask your question here

Need help?

Do you have a question about the Metabo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Metabo KHE 2860 Quick specifications

Below you will find the product specifications and the manual specifications of the Metabo KHE 2860 Quick.

General
BrandMetabo
ModelKHE 2860 Quick | 600878500
Productdrill machine
EAN4007430306609
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack, Green, Red, Silver
Chuck typeSDS Plus
DrillingYes
Hammer drillingYes
ChiselingYes
Quick release systemYes
Performance
Impact energy (max)3.2 J
Rated speed (max)870 RPM
Impact rate4400 bpm
Drilling diameter in concrete (max)28 mm
Drilling diameter in stone (max)68 mm
Drilling diameter in wood (max)32 mm
Drilling diameter in steel (max)13 mm
Idle speed (max)1150 RPM
Spindle collar diameter50 mm
Vibration level (hammer drilling)12.9 m/s²
Vibration level (chiseling)8.5 m/s²
Vibration level uncertainty (chiseling)1.5 m/s²
Sound pressure level89 dB
Sound power level99 dB
Sound level uncertainty3 dB
Power
Input power880 W
Cord length4 m
Power sourceAC
Weight & dimensions
Weight3100 g
Other features
On/off switchYes
Uncertainty coefficient (concrete)2.4 m/s²
Packaging content
Keyless chuckYes
Depth gauge includedYes
Carrying caseYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Metabo KHE 2860 Quick below.

How do I remove rust from my Metabo drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a weight of 3100 g.

Does the Metabo KHE 2860 Quick have a chuck type of SDS Plus?

Yes, the Metabo KHE 2860 Quick has a chuck type of SDS Plus. This allows for easy and secure bit changes, providing convenience and versatility for the user.

Can the Metabo KHE 2860 Quick be used for chiseling?

Yes, the Metabo KHE 2860 Quick can be used for chiseling. This feature expands the tool's functionality, making it suitable for various construction and renovation tasks.

What is the impact energy (max) of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum impact energy of 3.2 J. This indicates that it is capable of delivering powerful impact forces, allowing for efficient drilling and chiseling in tough materials.

What is the drilling diameter in concrete (max) for the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum drilling diameter of 28 mm in concrete. This size is suitable for most common drilling applications in concrete, providing versatility for the user.

Does the Metabo KHE 2860 Quick have an on/off switch?

Yes, the Metabo KHE 2860 Quick has an on/off switch. This feature allows for easy control and operation of the tool, enhancing user safety and convenience.

How do I determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine?

To determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine, you can refer to the specifications provided in the manual. The maximum drilling diameter is denoted as "ømax" in the technical specifications. Here are the steps to find the maximum drilling diameter: 1. Locate the page in the manual that contains the technical specifications. In the English manual, this information is on page 3. 2. Look for the parameter labeled "ømax" in the specifications. This represents the maximum drill diameter that the Metabo KHE 2860 Quick drill machine can handle. 3. Note down the value mentioned next to "ømax". This value indicates the maximum drilling diameter in millimeters. By following these steps, you can easily determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

How do I adjust the impact frequency of the drill machine?

To adjust the impact frequency of the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Locate the control button or switch that allows you to adjust the impact frequency. This button is usually labeled with symbols or text indicating the impact mode. 2. Depending on the model of the drill machine, the control button may be located on the side or the top of the drill body. Look for a button that is easily accessible and within reach of your fingers. 3. Press or slide the control button to switch between different impact frequencies. Some drill machines may have multiple impact modes, such as a high impact frequency for drilling into hard materials and a lower impact frequency for softer materials. 4. As you press or slide the control button, you will feel or hear a click indicating the change in impact frequency. Pay attention to the feedback from the drill machine to ensure that the desired impact frequency is selected. 5. Once you have adjusted the impact frequency, you can proceed with your drilling task. Remember to use appropriate drill bits and accessories suitable for the selected impact frequency. By following these steps, you can easily adjust the impact frequency of the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What are the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine?

The recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine are mentioned in the manual. However, I cannot directly access the manual. To find the recommended accessories, you can refer to the accessories section of the manual or the Metabo website. In the accessories section, you will find a list of compatible accessories specifically designed for the Metabo KHE 2860 Quick drill machine. These accessories are recommended by Metabo to ensure optimal performance and safety while using the drill machine. To access the accessories section, locate the corresponding page in the manual. The page number may vary depending on the language of the manual. Look for headings such as "Accessories" or "Recommended Accessories" to find the relevant information. Alternatively, you can visit the Metabo website and search for the accessories section for the Metabo KHE 2860 Quick drill machine. The website will provide a comprehensive list of genuine Metabo accessories compatible with the drill machine. By referring to the manual or the Metabo website, you can easily find the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine.

How do I securely attach accessories to the drill machine?

To securely attach accessories to the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Ensure that the drill machine is turned off and unplugged from the power source for safety. 2. Identify the accessory attachment point on the drill machine. This is usually located at the front of the drill, near the chuck. 3. Select the appropriate accessory for your desired application, such as a drill bit or screwdriver bit. 4. Align the accessory with the attachment point, ensuring that the shank of the accessory matches the size and type of the chuck. 5. Insert the accessory into the chuck, making sure it is fully seated and secure. 6. Tighten the chuck by rotating it in a clockwise direction. Use the chuck key or the built-in chuck tightening mechanism, depending on the design of your drill machine. 7. Continue tightening until the accessory is firmly held in place and cannot be easily rotated or removed. 8. Double-check the tightness of the accessory by giving it a gentle tug to ensure it is securely attached. By following these steps, you can securely attach accessories to the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What should I do if the drill machine requires repairs?

If the Metabo KHE 2860 Quick drill machine requires repairs, follow these steps: 1. Ensure the drill machine is turned off and unplugged from the power source for safety. 2. Identify the issue or problem with the drill machine. This could be a malfunctioning component, a broken part, or any other repairable issue. 3. Check the warranty information provided with the drill machine. If the drill machine is still under warranty, contact the authorized service center or Metabo customer support for assistance. 4. If the drill machine is not under warranty or the issue is not covered by the warranty, locate the nearest authorized Metabo service center or a qualified repair technician. 5. Contact the service center or repair technician to explain the issue and schedule a repair appointment. 6. Bring the drill machine to the authorized service center or arrange for the repair technician to visit your location, depending on the service options available. 7. Provide the necessary information, such as the model number (Metabo KHE 2860 Quick) and a description of the issue, to the service center or repair technician. 8. Follow the instructions provided by the service center or repair technician regarding the repair process, estimated timeline, and any associated costs. By following these steps, you can address any repair needs for the Metabo KHE 2860 Quick drill machine.

Is the manual of the Metabo KHE 2860 Quick available in English?

Yes, the manual of the Metabo KHE 2860 Quick is available in English .

Is your question not listed? Ask your question here

No results