Metabo KHE 2860 Quick manual

Metabo KHE 2860 Quick
8.9 · 3
PDF manual
 · 100 pages
English
manualMetabo KHE 2860 Quick

DEUTSCHde

4
Wir erklären in alleiniger Verantwortlichkeit: Diese
Bohr- und Meißelhämmer, identifiziert durch Type
und Seriennummer *1), entsprechen allen
einschlägigen Bestimmungen der Richtlinien *2)
und Normen *3). Technische Unterlagen bei *4) -
siehe Seite 3.
Die Bohr- und Meißelhämmer sind mit
entsprechendem Zubehör geeignet zum Arbeiten
mit Hammerbohrern und Meißeln in Beton, Stein
und ähnlichen Werkstoffen und mit Bohrkronen in
Ziegeln und dergleichen, sowie zum Bohren ohne
Schlag in Metall, Holz, usw. und zum Schrauben.
Für Schäden durch nicht bestimmungsgemäßen
Gebrauch haftet allein der Benutzer.
Allgemein anerkannte Unfallverhütungsvorschriften
und beigelegte Sicherheitshinweise müssen
beachtet werden.
Beachten Sie die mit diesem Symbol
gekennzeichneten Textstellen zu Ihrem
eigenen Schutz und zum Schutz Ihres
Elektrowerkzeugs!
WARNUNG – Zur Verringerung eines
Verletzungsrisikos Betriebsanleitung lesen.
WARNUNG Lesen Sie alle Sicherheits-
hinweise und Anweisungen. Versäumnisse
bei der Einhaltung der Sicherheitshinweise und
Anweisungen können elektrischen Schlag, Brand
und/oder schwere Verletzungen verursachen.
Bewahren Sie alle Sicherheitshinweise und
Anweisungen für die Zukunft auf.
Geben Sie Ihr Elektrowerkzeug nur zusammen mit
diesen Dokumenten weiter.
Tragen Sie Gehörschutz. Die Einwirkung von
Lärm kann Gehörverlust bewirken.
Benutzen Sie den mit dem Gerät gelieferten
Zusatzhandgriff. Der Verlust der Kontrolle kann zu
Verletzungen führen.
Halten Sie das Gerät an den isolierten
Griffflächen, wenn Sie Arbeiten ausführen, bei
denen das Einsatzwerkzeug verborgene
Stromleitungen oder das eigene Netzkabel
treffen kann. Der Kontakt mit einer
spannungsführenden Leitung kann auch metallene
Geräteteile unter Spannung setzen und zu einem
elektrischen Schlag führen.
Nur mit richtig angebrachtem Zusatzhandgriff
arbeiten.
Die Maschine immer mit beiden Händen an den
vorgesehenen Handgriffen festhalten, einen
sicheren Stand einnehmen und konzentriert
arbeiten.
Tragen Sie stets Schutzbrille, Arbeitshandschuhe,
und festes Schuhwerk beim Arbeiten mit Ihrem
Elektrowerkzeug!
Überzeugen Sie sich, dass sich an der Stelle, die
bearbeitet werden soll, keine Strom-, Wasser-
oder Gasleitungen befinden (z.B. mit Hilfe eines
Metallsuchgerätes).
Bei Ansprechen der Sicherheitsrastenkupplung
sofort die Maschine ausschalten!
Nicht an das sich drehende Einsatzwerkzeug
fassen!
Sichern Sie das Werkstück gegen Verschieben
oder Mitdrehen (z.B. durch Festspannen mit
Schraubzwingen).
Späne und Ähnliches nur bei Stillstand der
Maschine entfernen.
Achtung beim harten Schraubfall (Einschrauben
von Schrauben mit metrischem oder Zoll-Gewinde
in Stahl)! Der Schraubenkopf kann abgerissen
werden, bzw. es können hohe Rückdrehmomente
am Handgriff auftreten.
Stecker aus der Steckdose ziehen, bevor
irgendeine Einstellung, Umrüstung, Wartung oder
Reinigung vorgenommen wird.
Vermeiden Sie unbeabsichtigtes Anlaufen: Stets
Schalter entriegeln, wenn der Stecker aus der
Steckdose gezogen wird, oder wenn eine
Stromunterbrechung eingetreten ist.
Ein beschädigter oder rissiger Zusatzgriff ist zu
ersetzen. Maschine mit defektem Zusatzhandgriff
nicht betreiben.
Sicherheitsrastenkupplung: Klemmt oder hakt
das Einsatzwerkzeug, wird der Kraftfluss zum
Motor begrenzt. Wegen der dabei auftretenden
hohen Kräfte die Maschine immer mit beiden
Händen an den vorgesehenen Handgriffen
festhalten, einen sichereren Stand einnehmen und
konzentriert arbeiten.
Staubbelastung reduzieren:
WARNUNG - Einige Stäube, die durch
Sandpapierschleifen, Sägen, Schleifen,
Bohren und andere Arbeiten erzeugt werden,
enthalten Chemikalien, von denen bekannt ist, dass
sie Krebs, Geburtsfehler oder andere
Fortpflanzungsschäden verursachen. Einige
Beispiele für diese Chemikalien sind:
- Blei aus bleihaltigem Anstrich,
- mineralischer Staub aus Mauersteinen, Zement
und anderen Mauerwerkstoffen, und
- Arsen und Chrom aus chemisch behandeltem
Holz.
Ihr Risiko durch diese Belastung variiert, je
nachdem, wie oft Sie diese Art von Arbeit
ausführen. Um Ihre Belastung mit diesen

Originalbetriebsanleitung

1. Konformitätserklärung

2. Bestimmungsgemäße

Verwendung

3. Allgemeine

Sicherheitshinweise

4. Spezielle Sicherheitshinweise

Manual

View the manual for the Metabo KHE 2860 Quick here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Metabo KHE 2860 Quick or do you need help? Ask your question here

Need help?

Do you have a question about the Metabo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Metabo KHE 2860 Quick specifications

Below you will find the product specifications and the manual specifications of the Metabo KHE 2860 Quick.

General
BrandMetabo
ModelKHE 2860 Quick | 600878500
Productdrill machine
EAN4007430306609
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack, Green, Red, Silver
Chuck typeSDS Plus
DrillingYes
Hammer drillingYes
ChiselingYes
Quick release systemYes
Performance
Impact energy (max)3.2 J
Rated speed (max)870 RPM
Impact rate4400 bpm
Drilling diameter in concrete (max)28 mm
Drilling diameter in stone (max)68 mm
Drilling diameter in wood (max)32 mm
Drilling diameter in steel (max)13 mm
Idle speed (max)1150 RPM
Spindle collar diameter50 mm
Vibration level (hammer drilling)12.9 m/s²
Vibration level (chiseling)8.5 m/s²
Vibration level uncertainty (chiseling)1.5 m/s²
Sound pressure level89 dB
Sound power level99 dB
Sound level uncertainty3 dB
Power
Input power880 W
Cord length4 m
Power sourceAC
Weight & dimensions
Weight3100 g
Other features
On/off switchYes
Uncertainty coefficient (concrete)2.4 m/s²
Packaging content
Keyless chuckYes
Depth gauge includedYes
Carrying caseYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Metabo KHE 2860 Quick below.

How do I remove rust from my Metabo drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a weight of 3100 g.

Does the Metabo KHE 2860 Quick have a chuck type of SDS Plus?

Yes, the Metabo KHE 2860 Quick has a chuck type of SDS Plus. This allows for easy and secure bit changes, providing convenience and versatility for the user.

Can the Metabo KHE 2860 Quick be used for chiseling?

Yes, the Metabo KHE 2860 Quick can be used for chiseling. This feature expands the tool's functionality, making it suitable for various construction and renovation tasks.

What is the impact energy (max) of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum impact energy of 3.2 J. This indicates that it is capable of delivering powerful impact forces, allowing for efficient drilling and chiseling in tough materials.

What is the drilling diameter in concrete (max) for the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum drilling diameter of 28 mm in concrete. This size is suitable for most common drilling applications in concrete, providing versatility for the user.

Does the Metabo KHE 2860 Quick have an on/off switch?

Yes, the Metabo KHE 2860 Quick has an on/off switch. This feature allows for easy control and operation of the tool, enhancing user safety and convenience.

How do I determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine?

To determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine, you can refer to the specifications provided in the manual. The maximum drilling diameter is denoted as "ømax" in the technical specifications. Here are the steps to find the maximum drilling diameter: 1. Locate the page in the manual that contains the technical specifications. In the English manual, this information is on page 3. 2. Look for the parameter labeled "ømax" in the specifications. This represents the maximum drill diameter that the Metabo KHE 2860 Quick drill machine can handle. 3. Note down the value mentioned next to "ømax". This value indicates the maximum drilling diameter in millimeters. By following these steps, you can easily determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

How do I adjust the impact frequency of the drill machine?

To adjust the impact frequency of the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Locate the control button or switch that allows you to adjust the impact frequency. This button is usually labeled with symbols or text indicating the impact mode. 2. Depending on the model of the drill machine, the control button may be located on the side or the top of the drill body. Look for a button that is easily accessible and within reach of your fingers. 3. Press or slide the control button to switch between different impact frequencies. Some drill machines may have multiple impact modes, such as a high impact frequency for drilling into hard materials and a lower impact frequency for softer materials. 4. As you press or slide the control button, you will feel or hear a click indicating the change in impact frequency. Pay attention to the feedback from the drill machine to ensure that the desired impact frequency is selected. 5. Once you have adjusted the impact frequency, you can proceed with your drilling task. Remember to use appropriate drill bits and accessories suitable for the selected impact frequency. By following these steps, you can easily adjust the impact frequency of the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What are the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine?

The recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine are mentioned in the manual. However, I cannot directly access the manual. To find the recommended accessories, you can refer to the accessories section of the manual or the Metabo website. In the accessories section, you will find a list of compatible accessories specifically designed for the Metabo KHE 2860 Quick drill machine. These accessories are recommended by Metabo to ensure optimal performance and safety while using the drill machine. To access the accessories section, locate the corresponding page in the manual. The page number may vary depending on the language of the manual. Look for headings such as "Accessories" or "Recommended Accessories" to find the relevant information. Alternatively, you can visit the Metabo website and search for the accessories section for the Metabo KHE 2860 Quick drill machine. The website will provide a comprehensive list of genuine Metabo accessories compatible with the drill machine. By referring to the manual or the Metabo website, you can easily find the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine.

How do I securely attach accessories to the drill machine?

To securely attach accessories to the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Ensure that the drill machine is turned off and unplugged from the power source for safety. 2. Identify the accessory attachment point on the drill machine. This is usually located at the front of the drill, near the chuck. 3. Select the appropriate accessory for your desired application, such as a drill bit or screwdriver bit. 4. Align the accessory with the attachment point, ensuring that the shank of the accessory matches the size and type of the chuck. 5. Insert the accessory into the chuck, making sure it is fully seated and secure. 6. Tighten the chuck by rotating it in a clockwise direction. Use the chuck key or the built-in chuck tightening mechanism, depending on the design of your drill machine. 7. Continue tightening until the accessory is firmly held in place and cannot be easily rotated or removed. 8. Double-check the tightness of the accessory by giving it a gentle tug to ensure it is securely attached. By following these steps, you can securely attach accessories to the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What should I do if the drill machine requires repairs?

If the Metabo KHE 2860 Quick drill machine requires repairs, follow these steps: 1. Ensure the drill machine is turned off and unplugged from the power source for safety. 2. Identify the issue or problem with the drill machine. This could be a malfunctioning component, a broken part, or any other repairable issue. 3. Check the warranty information provided with the drill machine. If the drill machine is still under warranty, contact the authorized service center or Metabo customer support for assistance. 4. If the drill machine is not under warranty or the issue is not covered by the warranty, locate the nearest authorized Metabo service center or a qualified repair technician. 5. Contact the service center or repair technician to explain the issue and schedule a repair appointment. 6. Bring the drill machine to the authorized service center or arrange for the repair technician to visit your location, depending on the service options available. 7. Provide the necessary information, such as the model number (Metabo KHE 2860 Quick) and a description of the issue, to the service center or repair technician. 8. Follow the instructions provided by the service center or repair technician regarding the repair process, estimated timeline, and any associated costs. By following these steps, you can address any repair needs for the Metabo KHE 2860 Quick drill machine.

Is the manual of the Metabo KHE 2860 Quick available in English?

Yes, the manual of the Metabo KHE 2860 Quick is available in English .

Is your question not listed? Ask your question here

No results