Metabo KHE 2860 Quick manual

Metabo KHE 2860 Quick
8.9 · 3
PDF manual
 · 100 pages
English
manualMetabo KHE 2860 Quick

ESPAÑOLes

24
Declaramos bajo nuestra exclusiva
responsabilidad que estas estos martillos
perforadores y cinceladores, identificados por tipo y
número de serie *1), cumplen todas las
disposiciones pertinentes de las directivas *2) y
normas *3). Documentación técnica en *4) - véase
página 3.
Estos martillos perforadores y cinceladores junto
con sus accesorios correspondientes son
apropiados para trabajar con brocas de martillos
perforadores y cincelar en hormigón, piedra y
materiales similares, así como perforar sin
percusión en metal, madera etc. y atornillar.
Los posibles daños derivados de un uso
inadecuado son responsabilidad exclusiva del
usuario.
Se deberán respetar las normas sobre prevención
de accidentes generalmente aceptadas y las
indicaciones de seguridad aquí incluidas.
Por favor, por su propia protección y la de
su herramienta eléctrica, preste especial
atención a las partes marcadas con este
símbolo.
ADVERTENCIA: lea el manual de
instrucciones para reducir el riesgo de
accidentes.
ADVERTENCIA: lea íntegramente las
indicaciones de seguridad e
instrucciones de manejo. El incumplimiento de
las indicaciones de seguridad e instrucciones de
manejo siguientes puede dar lugar a descargas
eléctricas, incendios y/o lesiones graves.
Guarde estas indicaciones de seguridad e
instrucciones de manejo en un lugar seguro.
Si entrega su herramienta eléctrica a otra persona,
es imprescindible acompañarla de este
documento.
Use protectores auditivos. El efecto del ruido
puede provocar pérdida auditiva.
Utilice las empuñaduras complementarias
suministradas con la herramienta. El usuario
puede resultar herido por la pérdida del control de
la herramienta.
Sujete la herramienta por las superficies de la
empuñadura aisladas cuando realice trabajos
en los que la herramienta de inserción pudiera
entrar en contacto con cables eléctricos
ocultos o con el propio cable de alimentación.
El contacto con un cable eléctrico puede conducir
la tensión a través de las partes metálicas de la
herramienta y provocar una descarga eléctrica.
Trabaje solo con una empuñadura complementaria
correctamente montada.
Sujete siempre la herramienta por sus
empuñaduras con ambas manos, adopte una
postura segura y trabaje concentrado.
Lleve siempre puestas gafas protectoras, guantes
de trabajo y calzado firme cuando trabaje con su
herramienta eléctrica.
Asegúrese de que en el lugar de trabajo no existan
cables, tuberías de agua o gas (por ejemplo, con
ayuda de un detector de metales).
Si se activa el acoplamiento de encastre de
seguridad, desconecte inmediatamente la
máquina.
¡No toque la herramienta de inserción en rotación!
Fije la pieza de trabajo para que no pueda
deslizarse ni girarse (p.ej. utilizando para la fijación
tornillos de apriete).
La máquina debe estar siempre detenida para
eliminar virutas y otros residuos similares.
Atención en caso de un roscado duro (atornillado
de tornillos con rosca métrica o rosca inglesa en
acero). La cabeza del tornillo puede desprenderse
o pueden producirse momentos de retroceso en la
empuñadura.
Extraiga el enchufe de la toma de corriente antes de
realizar cualquier trabajo de ajuste, reparación,
reequipamiento o limpieza en la herramienta.
Evite que la herramienta se ponga en
funcionamiento accidentalmente: apague el
interruptor siempre que el enchufe esté fuera de la
toma de corriente o cuando se haya producido un
corte de corriente.
Las empuñaduras complementarias dañadas o
agrietadas deben cambiarse. No utilice una
herramienta cuya empuñadura complementaria
esté defectuosa.
Acoplamiento de encastre de seguridad: si la
herramienta de inserción se atasca o se engancha,
el flujo de potencia hacia el motor decrece. Las
fuerzas resultantes son muy altas, por ello, sujete
siempre la herramienta por sus empuñaduras con
ambas manos, adopte una postura segura y trabaje
concentrado.
Reducir la exposición al polvo:
ADVERTENCIA - Algunos polvos generados
por el lijado, aserrado, amolado o taladrado
con herramientas eléctricas y otras actividades de
construcción contienen sustancias químicas que se
sabe que causan cáncer, defectos de nacimiento y
otros daños sobre la reproducción. Algunos
ejemplos de estas sustancias químicas son:
- Plomo procedente de pinturas a base de plomo,

Manual de instrucciones original

1. Declaración de conformidad

2. Uso conforme a su finalidad

3. Recomendaciones generales

de seguridad

4. Indicaciones especiales de

seguridad

Manual

View the manual for the Metabo KHE 2860 Quick here, for free. This manual comes under the category drill machines and has been rated by 3 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Metabo KHE 2860 Quick or do you need help? Ask your question here

Need help?

Do you have a question about the Metabo and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Metabo KHE 2860 Quick specifications

Below you will find the product specifications and the manual specifications of the Metabo KHE 2860 Quick.

General
BrandMetabo
ModelKHE 2860 Quick | 600878500
Productdrill machine
EAN4007430306609
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack, Green, Red, Silver
Chuck typeSDS Plus
DrillingYes
Hammer drillingYes
ChiselingYes
Quick release systemYes
Performance
Impact energy (max)3.2 J
Rated speed (max)870 RPM
Impact rate4400 bpm
Drilling diameter in concrete (max)28 mm
Drilling diameter in stone (max)68 mm
Drilling diameter in wood (max)32 mm
Drilling diameter in steel (max)13 mm
Idle speed (max)1150 RPM
Spindle collar diameter50 mm
Vibration level (hammer drilling)12.9 m/s²
Vibration level (chiseling)8.5 m/s²
Vibration level uncertainty (chiseling)1.5 m/s²
Sound pressure level89 dB
Sound power level99 dB
Sound level uncertainty3 dB
Power
Input power880 W
Cord length4 m
Power sourceAC
Weight & dimensions
Weight3100 g
Other features
On/off switchYes
Uncertainty coefficient (concrete)2.4 m/s²
Packaging content
Keyless chuckYes
Depth gauge includedYes
Carrying caseYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Metabo KHE 2860 Quick below.

How do I remove rust from my Metabo drill machine?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a drill machine?

The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.

What is the weight of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a weight of 3100 g.

Does the Metabo KHE 2860 Quick have a chuck type of SDS Plus?

Yes, the Metabo KHE 2860 Quick has a chuck type of SDS Plus. This allows for easy and secure bit changes, providing convenience and versatility for the user.

Can the Metabo KHE 2860 Quick be used for chiseling?

Yes, the Metabo KHE 2860 Quick can be used for chiseling. This feature expands the tool's functionality, making it suitable for various construction and renovation tasks.

What is the impact energy (max) of the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum impact energy of 3.2 J. This indicates that it is capable of delivering powerful impact forces, allowing for efficient drilling and chiseling in tough materials.

What is the drilling diameter in concrete (max) for the Metabo KHE 2860 Quick?

The Metabo KHE 2860 Quick has a maximum drilling diameter of 28 mm in concrete. This size is suitable for most common drilling applications in concrete, providing versatility for the user.

Does the Metabo KHE 2860 Quick have an on/off switch?

Yes, the Metabo KHE 2860 Quick has an on/off switch. This feature allows for easy control and operation of the tool, enhancing user safety and convenience.

How do I determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine?

To determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine, you can refer to the specifications provided in the manual. The maximum drilling diameter is denoted as "ømax" in the technical specifications. Here are the steps to find the maximum drilling diameter: 1. Locate the page in the manual that contains the technical specifications. In the English manual, this information is on page 3. 2. Look for the parameter labeled "ømax" in the specifications. This represents the maximum drill diameter that the Metabo KHE 2860 Quick drill machine can handle. 3. Note down the value mentioned next to "ømax". This value indicates the maximum drilling diameter in millimeters. By following these steps, you can easily determine the maximum drilling diameter for the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

How do I adjust the impact frequency of the drill machine?

To adjust the impact frequency of the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Locate the control button or switch that allows you to adjust the impact frequency. This button is usually labeled with symbols or text indicating the impact mode. 2. Depending on the model of the drill machine, the control button may be located on the side or the top of the drill body. Look for a button that is easily accessible and within reach of your fingers. 3. Press or slide the control button to switch between different impact frequencies. Some drill machines may have multiple impact modes, such as a high impact frequency for drilling into hard materials and a lower impact frequency for softer materials. 4. As you press or slide the control button, you will feel or hear a click indicating the change in impact frequency. Pay attention to the feedback from the drill machine to ensure that the desired impact frequency is selected. 5. Once you have adjusted the impact frequency, you can proceed with your drilling task. Remember to use appropriate drill bits and accessories suitable for the selected impact frequency. By following these steps, you can easily adjust the impact frequency of the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What are the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine?

The recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine are mentioned in the manual. However, I cannot directly access the manual. To find the recommended accessories, you can refer to the accessories section of the manual or the Metabo website. In the accessories section, you will find a list of compatible accessories specifically designed for the Metabo KHE 2860 Quick drill machine. These accessories are recommended by Metabo to ensure optimal performance and safety while using the drill machine. To access the accessories section, locate the corresponding page in the manual. The page number may vary depending on the language of the manual. Look for headings such as "Accessories" or "Recommended Accessories" to find the relevant information. Alternatively, you can visit the Metabo website and search for the accessories section for the Metabo KHE 2860 Quick drill machine. The website will provide a comprehensive list of genuine Metabo accessories compatible with the drill machine. By referring to the manual or the Metabo website, you can easily find the recommended genuine Metabo accessories for the Metabo KHE 2860 Quick drill machine.

How do I securely attach accessories to the drill machine?

To securely attach accessories to the Metabo KHE 2860 Quick drill machine, follow these steps: 1. Ensure that the drill machine is turned off and unplugged from the power source for safety. 2. Identify the accessory attachment point on the drill machine. This is usually located at the front of the drill, near the chuck. 3. Select the appropriate accessory for your desired application, such as a drill bit or screwdriver bit. 4. Align the accessory with the attachment point, ensuring that the shank of the accessory matches the size and type of the chuck. 5. Insert the accessory into the chuck, making sure it is fully seated and secure. 6. Tighten the chuck by rotating it in a clockwise direction. Use the chuck key or the built-in chuck tightening mechanism, depending on the design of your drill machine. 7. Continue tightening until the accessory is firmly held in place and cannot be easily rotated or removed. 8. Double-check the tightness of the accessory by giving it a gentle tug to ensure it is securely attached. By following these steps, you can securely attach accessories to the Metabo KHE 2860 Quick drill machine without referring to the manual directly.

What should I do if the drill machine requires repairs?

If the Metabo KHE 2860 Quick drill machine requires repairs, follow these steps: 1. Ensure the drill machine is turned off and unplugged from the power source for safety. 2. Identify the issue or problem with the drill machine. This could be a malfunctioning component, a broken part, or any other repairable issue. 3. Check the warranty information provided with the drill machine. If the drill machine is still under warranty, contact the authorized service center or Metabo customer support for assistance. 4. If the drill machine is not under warranty or the issue is not covered by the warranty, locate the nearest authorized Metabo service center or a qualified repair technician. 5. Contact the service center or repair technician to explain the issue and schedule a repair appointment. 6. Bring the drill machine to the authorized service center or arrange for the repair technician to visit your location, depending on the service options available. 7. Provide the necessary information, such as the model number (Metabo KHE 2860 Quick) and a description of the issue, to the service center or repair technician. 8. Follow the instructions provided by the service center or repair technician regarding the repair process, estimated timeline, and any associated costs. By following these steps, you can address any repair needs for the Metabo KHE 2860 Quick drill machine.

Is the manual of the Metabo KHE 2860 Quick available in English?

Yes, the manual of the Metabo KHE 2860 Quick is available in English .

Is your question not listed? Ask your question here

No results