Melitta Passione One Touch manual

Melitta Passione One Touch
5.3 · 1
PDF manual
 · 232 pages
English
manualMelitta Passione One Touch
Pege und Wartung
41
DEUTSCH
ACHTUNG
Die Verwendung nicht geeigneter Entkalker kann zu Schäden am Gerät
führen.
Verwenden Sie ausschließlich den Flüssigentkalker Melitta® ANTI CALC
Espresso Machines.
ACHTUNG
Ein eingeschraubter Wasserlter kann während des Entkalkungspro-
gramms beschädigt werden.
Entfernen Sie den Wasserlter, wenn das Gerät Sie dazu auordert.
Legen Sie den Wasserlter während des Entkalkungsprogramms in ein
Gefäß mit Leitungswasser.
Nach Beendigung des Entkalkungsprogramms können Sie den Wasser-
lter wieder einsetzen und weiter verwenden.
Voraussetzung: Das Display zeigt die Bereitschaftsanzeige.
1. Drücken Sie die Taste „menu/ok“ länger als 2 Sekunden.
» Das Menü erscheint im Display.
2. Navigieren Sie zum Menü Pege > Entkalkung.
3. Wählen Sie mit den Pfeiltasten Start, und bestätigen Sie mit „menu/ok“.
4. Folgen Sie den weiteren Anweisungen im Display bis zum Ende des
Entkalkungsprogramms.
» Im Display erscheint die Bereitschaftsanzeige.

8.8 Wasserhärte einstellen

Mit der Einstellung der Wasserhärte wird reguliert, wie häug das Gerät Sie
auordert, es zu entkalken. Je härter das Wasser ist, desto häuger muss das
Gerät entkalkt werden.
Information
Wenn Sie einen Wasserlter verwenden, können Sie keine Wasserhärte
einstellen. Die Wasserhärte ist automatisch auf 1 = Weich eingestellt (siehe
Kapitel8.9 Wasserlter verwenden auf Seite42).
Bestimmen Sie die Wasserhärte mit dem beiliegenden Teststreifen. Beach-
ten Sie die Anweisungen auf der Verpackung des Teststreifens und die
Tabelle Wasserhärtebereich auf Seite47.

View the manual for the Melitta Passione One Touch here, for free. This manual comes under the category coffee makers and has been rated by 1 people with an average of a 5.3. This manual is available in the following languages: English. Do you have a question about the Melitta Passione One Touch or do you need help? Ask your question here

Need help?

Do you have a question about the Melitta and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Melitta Passione One Touch is a coffee maker that offers convenience and versatility. It is designed to provide a seamless coffee brewing experience with just a touch of a button. The machine is equipped with advanced technology that allows it to produce a wide range of coffee beverages, including espresso, cappuccino, and latte macchiato. The Passione One Touch features a user-friendly interface, making it easy for anyone to operate. It also has adjustable settings for coffee strength and temperature to suit individual preferences. With its compact and sleek design, this coffee maker can fit seamlessly into any kitchen or office space. Built with high-quality materials, the Passione One Touch ensures durability and long-lasting performance. It boasts a sturdy construction that can withstand constant use. The machine also has a removable brewing unit, making it easy to clean and maintain. Additionally, the Passione One Touch has a generous water tank capacity, reducing the need for frequent refills. It also has a built-in milk frother, enabling users to create delicious milk-based coffee beverages effortlessly. In conclusion, the Melitta Passione One Touch offers a convenient and versatile coffee brewing experience. With its user-friendly interface and adjustable settings, it allows users to customize their coffee to their liking. Its durable construction and easy maintenance make it a reliable choice for coffee enthusiasts.

General
BrandMelitta
ModelPassione One Touch
Productcoffee maker
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Melitta Passione One Touch below.

How often should I descale my coffee maker?

How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.

What is the best way to descale my coffee maker?

To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.

What is espresso?

Espresso is a small amount of concentrated coffee.

How long can I keep coffee beans?

The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.

What is the best way to store coffee?

It is recommended to store coffee in an airtight and clean container.

What does the grind say about the taste of the coffee?

How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.

How do I turn on the Melitta Passione One Touch coffee maker?

To turn on the Melitta Passione One Touch coffee maker, follow these steps: 1. Make sure the coffee maker is plugged into a power outlet. 2. Press the power button located on the control panel of the coffee maker. The power button is usually indicated by a symbol or the word "Power." 3. Wait for the coffee maker to initialize. This may take a few seconds. 4. Once the coffee maker is turned on, the display or indicator lights will illuminate, indicating that the machine is ready for use. Please note that the specific location and appearance of the power button may vary slightly depending on the model of the Melitta Passione One Touch coffee maker. Refer to the control panel or the user manual for the exact location of the power button if you are having trouble finding it. Remember to always follow the safety instructions provided in the manual to ensure safe and proper operation of the coffee maker.

Why is the coffee maker not responding when I press the buttons?

If the Melitta Passione One Touch coffee maker is not responding when you press the buttons, you can try the following steps: 1. Check if the coffee maker is properly plugged into a power outlet. Ensure that the power cord is securely connected. 2. Make sure that the coffee maker is turned on. Press the power button located on the control panel to turn on the machine. The power button is usually indicated by a symbol or the word "Power." 3. Verify that the display or indicator lights are functioning. If the display is not showing any information or the lights are not illuminated, there may be an issue with the power supply or the control panel. 4. If the coffee maker still does not respond, try resetting the machine. Unplug the coffee maker from the power outlet, wait for a few seconds, and then plug it back in. This can help to reset any temporary glitches or errors. 5. If none of the above steps resolve the issue, refer to the troubleshooting section of the user manual for further guidance or contact Melitta customer support for assistance. Please note that the specific troubleshooting steps may vary depending on the model of the Melitta Passione One Touch coffee maker.

How do I select different coffee options on the coffee maker?

To select different coffee options on the Melitta Passione One Touch coffee maker, follow these steps: 1. Ensure that the coffee maker is turned on and the ready symbol appears on the display. 2. Place a vessel beneath the outlet where the coffee will be dispensed. 3. Press the corresponding button for the desired coffee option, such as "Espresso" or "Café Crème." 4. The grinding process and beverage dispensing will start automatically. 5. The coffee maker will end the beverage dispensing process automatically. 6. Remove the vessel from beneath the outlet. To permanently change the beverage settings, including coffee amount, milk amount, hot water amount, coffee strength, and temperature, follow these steps: 1. Ensure that the ready symbol appears on the display. 2. Press and hold the "menu/ok" button for longer than 2 seconds to access the menu. 3. Navigate to the desired beverage setting, such as coffee strength, using the arrow buttons. 4. Use the arrow buttons to select the desired setting and confirm it by pressing the "menu/ok" button. 5. Repeat the process to change other beverage settings if desired. 6. Exit the menu by selecting the "Exit" command. Please note that the specific buttons and menu options may vary slightly depending on the model of the Melitta Passione One Touch coffee maker. Refer to the control panel or the user manual for the exact location and instructions for selecting different coffee options.

How do I adjust the strength of the coffee?

To adjust the strength of the coffee on the Melitta Passione One Touch coffee maker, follow these steps: 1. Ensure that the coffee maker is turned on and the ready symbol appears on the display. 2. Press and hold the "menu/ok" button for longer than 2 seconds to access the menu. 3. Navigate to the desired coffee option, such as "Espresso," using the arrow buttons. 4. Select the "Coffee strength" menu. 5. Use the arrow buttons to choose the desired coffee strength, such as "Very mild," "Mild," "Normal," "Strong," or "Very strong." 6. Confirm the selection by pressing the "menu/ok" button. 7. Exit the menu by selecting the "Exit" command. Please note that the specific menu options and coffee strength settings may vary slightly depending on the model of the Melitta Passione One Touch coffee maker. Refer to the control panel or the user manual for the exact location and instructions for adjusting the coffee strength. Additionally, it is worth mentioning that the grinding fineness of the coffee powder can also influence the flavor of the coffee. If you want to further customize the taste, you can adjust the grinding fineness using the lever located on the housing of the coffee maker. Moving the lever to the left makes the grinding fineness finer, resulting in a stronger coffee flavor, while moving it to the right makes the grinding fineness coarser, resulting in a milder flavor.

Why is the coffee maker not brewing coffee?

There could be several reasons why the Melitta Passione One Touch coffee maker is not brewing coffee. Here are some possible causes and actions to take: 1. Grinding fineness too fine: Adjust the grinding fineness to a coarser setting. Refer to section 7.6 in the manual for instructions on how to change the grinding fineness. 2. Appliance soiled: Clean the brewing unit and run the cleaning program as described in section 8.3 and 8.6 of the manual. 3. Appliance covered inside with limescale: Descale the appliance following the instructions in section 8.7 of the manual. 4. Water tank not filled or inserted correctly: Ensure that the water tank is filled with water and properly positioned in the coffee maker. Refer to section 4.5 for instructions on filling and inserting the water tank. 5. Brewing unit clogged: Clean the brewing unit according to the instructions in section 8.3 of the manual. 6. Coffee beans not dropping into the grinder: Press a direct key, tap lightly on the bean container, or clean the bean container. If the coffee beans are too oily, try using different coffee beans. If the above actions do not resolve the issue or if you encounter other problems, it is recommended to contact the Melitta hotline for further assistance.

How do I turn on the Melitta Passione One Touch coffee maker?

To turn on the Melitta Passione One Touch coffee maker, follow these steps: 1. Make sure the coffee maker is plugged into a power outlet. 2. Locate the power button on the coffee maker. It is usually located on the control panel or near the display. 3. Press the power button to turn on the coffee maker. You may need to hold the button for a few seconds until the machine powers on. 4. Once the coffee maker is turned on, the display or indicator lights should activate, indicating that the machine is ready for use. 5. You can now proceed to select your desired brewing options and prepare your coffee. Please note that the specific location and design of the power button may vary slightly depending on the model of the Melitta Passione One Touch coffee maker. Refer to the control panel or user interface of your specific machine for the exact location of the power button.

Why is the coffee maker not responding when I press the power button?

If the Melitta Passione One Touch coffee maker is not responding when you press the power button, you can try the following steps: 1. Check if the power cord is properly plugged into a power outlet. 2. Ensure that the power outlet is functioning by testing it with another device. 3. Make sure that the coffee maker is properly connected to the power source and that there are no loose connections. 4. Check if there is any visible damage to the power cord or the power button. 5. If the coffee maker has a power switch or a power button with multiple functions, make sure you are pressing the correct button for turning it on. 6. Try resetting the coffee maker by unplugging it from the power source, waiting for a few minutes, and then plugging it back in. 7. If none of the above steps work, there may be an issue with the internal components of the coffee maker. In this case, it is recommended to contact the manufacturer's customer support for further assistance. Please note that these troubleshooting steps are general suggestions and may vary depending on the specific model of the Melitta Passione One Touch coffee maker.

How do I select different brewing options on the coffee maker?

To select different brewing options on the Melitta Passione One Touch coffee maker, follow these steps: 1. Ensure that the coffee maker is powered on and ready for use. 2. Place a suitable vessel beneath the outlet where the coffee will be dispensed. 3. On the control panel, locate the buttons labeled "Espresso" and "Café Crème" for standard brewing options. 4. Press the "Espresso" button to prepare an espresso or the "Café Crème" button to prepare a café crème. 5. The coffee maker will start the grinding process and begin dispensing the selected beverage. 6. The beverage dispensing will automatically stop once the desired amount has been dispensed. 7. Remove the vessel from beneath the outlet. 8. The display will show a ready symbol, indicating that the brewing process is complete. Please note that these steps are for preparing espresso and café crème, which are the standard brewing options. The manual may provide additional information on selecting and preparing other beverage specialities using recipes.

What should I do if the coffee maker is not brewing coffee?

If the Melitta Passione One Touch coffee maker is not brewing coffee, you can try the following steps: 1. Check if the water tank is filled with water and properly inserted into the coffee maker. 2. Ensure that the coffee beans are present in the bean container and not stuck or clogged. 3. Clean the brewing unit to remove any coffee residue or blockages that may be preventing the flow of coffee. 4. If the coffee is only emerging in drips from the outlet, adjust the grinding fineness to a coarser setting. 5. If the appliance is covered inside with limescale, descale the coffee maker following the instructions in the manual. 6. Make sure that the vessel placed beneath the outlet is positioned correctly to collect the brewed coffee. 7. If the "Fill beans" message appears on the display despite the bean container being full, try pressing a direct key, tapping lightly on the bean container, or using different coffee beans. 8. If none of the above steps resolve the issue, it is recommended to contact the manufacturer's hotline for further assistance. Please note that these troubleshooting steps are general suggestions and may vary depending on the specific model of the Melitta Passione One Touch coffee maker.

How can I adjust the strength of the coffee brewed by the Melitta Passione One Touch coffee maker?

To adjust the strength of the coffee brewed by the Melitta Passione One Touch coffee maker, follow these steps: 1. Ensure that the coffee maker is powered on and ready for use. 2. Press and hold the "menu/ok" button on the control panel for longer than 2 seconds. 3. The menu will appear on the display. 4. Navigate to the "Direct keys" option and select "Espresso" from the menu. 5. Within the "Espresso" menu, select the "Coffee strength" option. 6. Use the arrow buttons to choose the desired coffee strength, such as "Very mild," "Mild," "Normal," "Strong," or "Very strong." 7. Confirm the selection by pressing the "menu/ok" button. 8. Exit the menu by repeatedly selecting the "Exit" command until the ready symbol appears on the display. 9. The newly selected coffee strength will be used the next time an Espresso is prepared. Please note that these steps are specific to adjusting the coffee strength for an Espresso. The manual may provide additional information on adjusting the strength for other coffee specialties.

How do I turn on the Melitta Passione One Touch coffee maker?

To turn on the Melitta Passione One Touch coffee maker, please follow these steps: 1. Make sure the coffee maker is plugged into a power outlet. 2. Press the power button located on the control panel of the coffee maker. The power button is usually indicated by a symbol or the word "Power." 3. Wait for the coffee maker to initialize. This may take a few seconds. 4. Once the coffee maker is turned on, the display or indicator lights will illuminate, indicating that the machine is ready for use. 5. You can now proceed to select your desired coffee options and customize your brewing settings. Please note that the specific location and appearance of the power button may vary slightly depending on the model of the Melitta Passione One Touch coffee maker. Refer to the control panel or the user manual for more detailed instructions if needed.

Why is the coffee maker not responding when I press the buttons?

If the Melitta Passione One Touch coffee maker is not responding when you press the buttons, you can try the following steps: 1. Check if the coffee maker is properly plugged into a power outlet. Ensure that the power cord is securely connected. 2. Make sure that the coffee maker is turned on. Look for the power button on the control panel and press it to turn on the machine. 3. Verify that the display or indicator lights are functioning. If there is no display or the lights are not illuminated, it may indicate a power issue. 4. If the coffee maker still does not respond, try resetting the machine. Locate the reset button, usually located on the back or bottom of the coffee maker, and press it with a small object like a paperclip. 5. If none of the above steps resolve the issue, it is recommended to contact Melitta customer support for further assistance. They can provide specific troubleshooting steps or arrange for repairs if necessary. Please note that the specific location and appearance of buttons may vary slightly depending on the model of the Melitta Passione One Touch coffee maker.

How do I select different coffee options on the coffee maker?

To select different coffee options on the Melitta Passione One Touch coffee maker, follow these steps: 1. Ensure that the coffee maker is ready for use, indicated by the "ready" symbol on the display. 2. Place a suitable vessel beneath the outlet to collect the coffee. 3. Press the corresponding button for the desired coffee option, such as "Espresso" or "Café Crème." 4. The grinding process and beverage dispensing will start automatically. 5. The coffee maker will stop the beverage dispensing process when it is complete. 6. Remove the vessel from beneath the outlet. 7. The "ready" symbol will appear on the display, indicating that the coffee is ready to be enjoyed. Please note that these steps are for preparing Espresso and Café Crème, as mentioned in the manual. For other coffee options or recipes, refer to the specific sections in the manual that provide instructions for changing default settings and preparing different coffee specialities. Remember to always refer to the Melitta Passione One Touch coffee maker manual for detailed instructions and specific settings based on your preferences.

How do I adjust the strength of the coffee?

To adjust the strength of the coffee on the Melitta Passione One Touch coffee maker, follow these steps: 1. Ensure that the coffee maker is ready for use, indicated by the "ready" symbol on the display. 2. Press and hold the "menu/ok" button for more than 2 seconds. 3. The menu will appear on the display. 4. Navigate to the "Direct keys" option using the arrow buttons. 5. Select "Espresso" from the menu options. 6. Within the "Espresso" menu, select the "Coffee strength" option. 7. Use the arrow buttons to choose the desired coffee strength, such as "Very mild," "Mild," "Normal," "Strong," or "Very strong." 8. Confirm your selection by pressing the "menu/ok" button. 9. Exit the menu by repeatedly selecting the "Exit" command until the "ready" symbol appears on the display. 10. The newly selected coffee strength will be used the next time you prepare an Espresso. Please note that these steps are based on the information provided in the manual for the Melitta Passione One Touch coffee maker.

Why is the coffee maker not brewing coffee?

There could be several reasons why the Melitta Passione One Touch coffee maker is not brewing coffee. Here are some possible causes and actions to take: 1. Grinding fineness too fine: Adjust the grinding fineness to a coarser setting. 2. Appliance soiled: Clean the brewing unit and run the cleaning program. 3. Appliance covered inside with limescale: Descale the appliance. 4. Water tank not filled or inserted correctly: Ensure the water tank is filled and properly positioned. 5. Brewing unit clogged: Clean the brewing unit. 6. Coffee beans do not drop into the grinder: Press a direct key, tap lightly on the bean container, or clean the bean container. 7. Insufficient water or coffee beans: Check the water level and refill if necessary, and ensure there are enough coffee beans in the bean container. If the above actions do not resolve the issue or if you encounter other problems not listed, it is recommended to contact Melitta customer support for further assistance. Please note that these troubleshooting steps are based on the information provided in the manual for the Melitta Passione One Touch coffee maker.

Is the manual of the Melitta Passione One Touch available in English?

Yes, the manual of the Melitta Passione One Touch is available in English .

Is your question not listed? Ask your question here

No results