View the manual for the Melitta Look V Therm Perfection here, for free. This manual comes under the category coffee makers and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Melitta Look V Therm Perfection or do you need help? Ask your question here
| Brand | Melitta |
| Model | Look V Therm Perfection |
| Product | coffee maker |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Melitta Look V Therm Perfection below.
How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.
To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.
Espresso is a small amount of concentrated coffee.
The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.
It is recommended to store coffee in an airtight and clean container.
How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.
To adjust the water hardness setting on the Melitta Look V Therm Perfection coffee maker, follow these steps: 1. Determine the hardness of the water in your area using water hardness measuring strips or by consulting your local water provider. 2. Press and hold down the CALC button for more than 2 seconds until it starts flashing. The factory setting flashes briefly four times. 3. Press the CALC button briefly to set the water hardness at three different levels, indicated by the number of flashes on the display. 4. Refer to Table 1 in the manual for the settings and display indications. 5. Once you have selected the desired hardness level, hold down the CALC button for more than two seconds to save your settings. 6. Note that water hardness cannot be adjusted while brewing, and the last chosen hardness level remains even after disconnecting the power cable.
To properly connect the Melitta Look V Therm Perfection coffee maker to the power source before making coffee, follow these steps: 1. Ensure that the power supply in your home matches the information on the model plate at the base of the appliance. 2. Place the coffee maker on a dry, level, and stable surface. 3. Connect the appliance to a power source, making sure to store any unused cable in the base of the appliance. 4. Rinse the appliance twice with the maximum amount of water without a filter bag or ground coffee to clean it thoroughly. 5. Check the water hardness level and adjust if necessary to prevent lime scale buildup and ensure efficient water heating. 6. Pay attention to safety instructions and always disconnect the appliance from the power supply when not in use.
To clean and maintain the Melitta Look V Therm Perfection coffee maker, follow these steps: 1. Switch off the machine and disconnect the power cable before cleaning. Allow the appliance to cool completely. 2. Clean the parts that come into contact with coffee after each use, such as the jug and filter holder. 3. Use a soft damp cloth to clean the housing. The jug lid, filter insert, and swing filter can be washed in the dishwasher. 4. Avoid using harsh or abrasive cleaning agents to prevent damage. 5. Do not immerse the appliance in water. 6. For external cleaning, ensure the appliance is cool, and clean with care. 7. Remember to clean the appliance thoroughly to ensure optimal performance and longevity.
Yes, the manual of the Melitta Look V Therm Perfection is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Melitta and is the answer not in the manual?
Question and answer
Number of questions: 0