Melitta Look Therm manual

Melitta Look Therm
5.2 · 1
PDF manual
 · 37 pages
English
manualMelitta Look Therm
LOOK
®

THERM

LOOK
®

THERM STEEL

1100136-03 1100136-03
2

DE Gebrauchsanleitung

GB Operating Instructions

FR Mode d`emploi

NL Gebruiksaanwijzing

IT Istruzioni d’uso

ES Instruciones de Uso

DK Brugsanvisning

SE Bruksanvisning

NO Bruksanvisning

FI Käyttöohje

RU Руководство

по эксплуатации

 D E
 G B
 F R
 N L
 I T
 E S
 D K
 S E
 N O
 F I
 R U
Ein-/Ausschalter | On/O-Switch | Bouton On/O | Aan/uit-schakelaar | Tasto ON/OFF | Interruptor
Encender/Apagar | Forsænket greb til fjernelse af vandtank | handtag för att ta bort vattenbehållaren |
på/av-knapp | On/O -kytkin | кнопка выключения
Wassertankdeckel | water tank lid | couvercle du réservoir à eau | deksel van het waterreservoir |
il coperchio del serbatoio dell'acqua | Tapa del depósito de agua | vandtankens låg | locket till vattentanken |
lokk til vanntank | vesisäiliön kansi | крышкa резервуарa для воды
Wassertankskala | water level display | Indicateur du niveau d'eau | waterpeilindicator op de watertank |
la scala graduata del serbatoio | Indicador nivel del agua | vandstands skala | nivågraderingen på tanken |
skalering på vanntank | vesisäiliön mitta-asteikko | индикатор уровня воды
Tropfstopp | drip stop | système anti-gouttes | druppelstop | la protezione antigocciolamento |
dispositivo antigoteo | drypstoppet | droppstopp | dryppestopp | tippalukko |
противокапельный клапан
Gri zum Önen des Schwenkfilters | handle to open the swivel filter | porte-filtre amovible avec
poignée | Manivela para abrir el filtro giratorio | Greep om de zwenkfilter te openen. | Maniglia per aprire il filtro
oscillante | håndtag til at åbne svingfilter | handtag att öppna filterbehållaren | håndtak til å åpne filterbeholderen |
Suodatinsuppilon aukaisukahva | ручка для открывания поворотного держателя фильтра
AromaSelector
®
| Selecteur d'arôme | aromavelger
A
B
C
D
E
F
A
B
C
DE
F

View the manual for the Melitta Look Therm here, for free. This manual comes under the category coffee makers and has been rated by 1 people with an average of a 5.2. This manual is available in the following languages: English. Do you have a question about the Melitta Look Therm or do you need help? Ask your question here

Need help?

Do you have a question about the Melitta and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandMelitta
ModelLook Therm | LOOKLUXETH
Productcoffee maker
LanguageEnglish
FiletypeUser manual (PDF)
Other features
TypeCoffee
Performance
Capacity in cups8 cups
Water tank capacity1 L
Product typeDrip coffee maker
Ergonomics
Water level indicatorYes
Illuminated on/off switchYes
Visible water levelYes
Product colorBlack, Silver
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Melitta Look Therm below.

How often should I descale my coffee maker?

How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.

What is the best way to descale my coffee maker?

To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.

What is espresso?

Espresso is a small amount of concentrated coffee.

How long can I keep coffee beans?

The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.

What is the best way to store coffee?

It is recommended to store coffee in an airtight and clean container.

What does the grind say about the taste of the coffee?

How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.

Does the Melitta Look Therm have a water level indicator?

Yes, the Melitta Look Therm has a water level indicator, allowing users to easily monitor the amount of water in the coffee maker. This feature enables precise measurements for brewing coffee.

Is the on/off switch of the Melitta Look Therm illuminated?

Yes, the on/off switch of the Melitta Look Therm is illuminated, providing a clear indication of the coffee maker's operational status. This makes it convenient to operate the machine, especially in low-light conditions.

Can users see the water level in the Melitta Look Therm?

Yes, the Melitta Look Therm has a visible water level, allowing users to easily check the amount of water present. This feature provides added convenience and avoids any potential overflow or underfill issues.

What is the capacity of the Melitta Look Therm in terms of cups?

The Melitta Look Therm has a capacity of 8 cups, which is suitable for small to medium-sized households or workplaces. This capacity ensures that users can prepare a sufficient amount of coffee for their needs.

What is the water tank capacity of the Melitta Look Therm?

The Melitta Look Therm has a water tank capacity of 1 liter, which is ideal for brewing several cups of coffee consecutively. This capacity is considered reasonable compared to other drip coffee makers in the market.

How do I clean the Melitta Look Therm coffee maker?

To clean the Melitta Look Therm coffee maker, follow these steps: 1. Safety precautions: Before cleaning the coffee maker, ensure that it is unplugged and cooled down to avoid any accidents. 2. Exterior cleaning: Use a soft damp cloth to clean the exterior of the coffee maker. Avoid using abrasive cleaners or harsh chemicals that may damage the surface. 3. Insulated pot cleaning: The insulated pot should be cleaned separately. Do not use the pot in the microwave or place it on a hot oven. Clean any tenacious staining with a special cleaner recommended for coffee makers. For regular cleaning, use a soft damp cloth to wipe the pot. 4. Glass flask care: To avoid damaging the glass flask, do not use any hard or sharp objects to stir or clean it. Also, do not use ice cubes or carbonated drinks with the insulated pot. Clean the glass flask with a soft damp cloth and avoid subjecting it to high temperature variations. 5. Regular maintenance: Regularly descale the coffee maker to remove any mineral deposits that may affect its performance. Follow the instructions provided in the manual for descaling. By following these steps, you can effectively clean and maintain your Melitta Look Therm coffee maker for optimal performance and longevity.

How often should I descale the coffee maker?

To descale the Melitta Look Therm coffee maker, follow these steps: 1. Prepare the descaler: Follow the manufacturer's instructions regarding the amount of descaler to be used. We recommend using "Melitta Anti Calc Filter Café Machines" descaler. 2. Turn on the coffee maker: Plug in the coffee maker and turn it on. 3. Add descaler solution: Pour the prepared descaler solution into the water tank of the coffee maker. 4. Start the descaling process: Follow the descaler manufacturer's instructions to initiate the descaling process. This may involve pressing specific buttons or following a specific sequence of actions. 5. Allow the descaler to run through: Let the descaler solution run through the coffee maker completely. This may take some time, so be patient and allow the process to finish. 6. Rinse the coffee maker: After the descaling process is complete, the coffee maker needs to be rinsed with fresh water. Allow the machine to cool for a short time, then fill the water tank with the maximum amount of water. Turn on the coffee maker and let all the water flow through it. Repeat this rinsing process. Regular descaling is necessary to prevent the accumulation of mineral deposits and ensure the optimal performance of your Melitta Look Therm coffee maker.

How do I properly dispose of the Melitta Look Therm coffee maker?

To properly dispose of the Melitta Look Therm coffee maker, follow these steps: 1. Unplug the coffee maker: Before disposing of the coffee maker, make sure it is unplugged from the power source. 2. Allow the coffee maker to cool down: Let the coffee maker cool down completely before handling it for disposal. This will prevent any risk of burns or injuries. 3. Separate the components: Disassemble the coffee maker by removing any detachable parts, such as the water tank, filter holder, and carafe. Refer to the user manual for specific instructions on how to disassemble the Melitta Look Therm coffee maker. 4. Recycle or dispose of the components: Check with your local recycling facilities or waste management authorities to determine the proper method of disposal for each component. Some parts, such as the plastic housing, may be recyclable, while others may need to be disposed of as electronic waste. 5. Follow local regulations: Ensure that you comply with any local regulations or guidelines regarding the disposal of electronic appliances. Some areas may have specific collection points or recycling programs for electronic devices. By following these steps, you can properly dispose of your Melitta Look Therm coffee maker in an environmentally responsible manner.

How do I use and clean the insulated pot?

To use and clean the insulated pot of the Melitta Look Therm coffee maker, follow these steps: 1. Brewing coffee: After the coffee is brewed, the coffee flows through the central valve in the insulated lid of the pot. 2. Pouring coffee: To pour coffee from the insulated pot, press down on the sealing lever located on the lid. 3. Removing the lid: To remove the lid for cleaning, press the seals on the side of the lid while lifting it up. 4. Cleaning the pot: Clean the insulated pot by using a soft damp cloth to wipe the exterior. The lid, filter insert, and swivel filter can be washed in the dishwasher. 5. Descaling: Depending on the water hardness, the coffee maker may become calcified over time. Regular descaling is necessary to maintain optimal performance. Follow the descaler manufacturer's instructions and pour the descaler into the water tank. Run the descaling process as instructed, and then rinse the coffee maker with fresh water. By following these steps, you can effectively use and clean the insulated pot of the Melitta Look Therm coffee maker for a great coffee experience.

What should I do if the glass flask of the insulated pot gets damaged?

If the glass flask of the insulated pot of the Melitta Look Therm coffee maker gets damaged, follow these steps: 1. Safety precautions: Ensure that the coffee maker is unplugged and cooled down before handling the damaged glass flask to avoid any injuries. 2. Contact customer support: Reach out to Melitta customer support for assistance in obtaining a replacement glass flask. Provide them with the model number and any other necessary information to ensure you receive the correct replacement part. 3. Order a replacement: If the glass flask is not covered under warranty or customer support is unable to provide a replacement, you can order a new glass flask from authorized Melitta retailers or online stores. 4. Install the replacement: Once you have obtained the replacement glass flask, carefully remove the damaged flask from the insulated pot and insert the new flask in its place. Ensure that it is securely fitted and aligned properly. 5. Dispose of the damaged flask: Dispose of the damaged glass flask in accordance with local regulations for glass disposal. Check with your local waste management authorities for the appropriate method of disposal. By following these steps, you can address the issue of a damaged glass flask in the insulated pot of your Melitta Look Therm coffee maker and continue enjoying your coffee brewing experience.

What steps should I follow before using the coffee maker for the first time?

Before using the Melitta Look Therm coffee maker for the first time, follow these steps: 1. Check power supply: Ensure that the power supply in your home matches the specifications indicated on the model plate located on the base of the coffee maker. 2. Connect the coffee maker: Plug the coffee maker into a correctly installed socket. If the coffee maker will not be used for an extended period, unplug it from the power source. 3. Rinse the coffee maker: To remove any water deposits or residues from the manufacturing process, rinse the coffee maker twice with the maximum amount of water. Do this without using a filter bag or ground coffee. 4. Familiarize yourself with the features: Take the time to understand the various features of the coffee maker, as they contribute to the best coffee enjoyment and convenient use. These features will be explained in the user manual. By following these steps, you can ensure that your Melitta Look Therm coffee maker is properly set up and ready for use.

How do I check the power supply of the coffee maker?

To check the power supply of the Melitta Look Therm coffee maker, follow these steps: 1. Ensure compatibility: Check the model plate located on the base of the coffee maker to verify that the power supply in your home corresponds to the specifications indicated. 2. Connect the coffee maker: Plug the coffee maker into a correctly installed socket. Ensure that the power cable is securely connected to both the coffee maker and the power source. 3. Power indicator: Look for a power indicator light on the coffee maker. If the power supply is functioning properly, the indicator light should turn on when the coffee maker is plugged in. 4. Test the coffee maker: Turn on the coffee maker and check if it starts operating. Listen for any sounds indicating that the machine is functioning, such as the sound of water heating or the brewing process. If the power indicator light does not turn on or the coffee maker does not start operating, check the power source, the power cable, and the socket for any issues. If the problem persists, contact Melitta customer support for further assistance. By following these steps, you can ensure that the power supply of your Melitta Look Therm coffee maker is properly checked before use.

How do I connect the coffee maker to a power source?

To connect the Melitta Look Therm coffee maker to a power source, follow these steps: 1. Locate the power cable: Identify the power cable attached to the coffee maker. It is usually located at the back or bottom of the machine. 2. Plug in the power cable: Find a suitable power outlet near the desired location for the coffee maker. Ensure that the outlet is easily accessible and compatible with the coffee maker's power requirements. 3. Insert the power plug: Insert the power plug at the end of the cable into the power outlet. Make sure it is inserted fully and securely. 4. Check the connection: Verify that the power plug is firmly connected to the power outlet. Ensure that there are no loose connections or exposed wires. 5. Power on the coffee maker: Once the coffee maker is connected to the power source, locate the power switch or button on the machine. Turn it on to activate the coffee maker. By following these steps, you can successfully connect the Melitta Look Therm coffee maker to a power source and begin using it to brew delicious coffee.

How do I rinse the coffee maker to remove water deposits?

To rinse the Melitta Look Therm coffee maker and remove water deposits, follow these steps: 1. Prepare the coffee maker: Ensure that the coffee maker is unplugged and cooled down before starting the rinsing process. 2. Fill the water tank: Open the lid on the water tank and fill it with the desired amount of water using the therm jug. Use the water level display on the tank to choose the correct number of cups. 3. Rinse the coffee maker: Run the rinsing process twice without using a filter bag or ground coffee. This will help clean the coffee maker and remove any water deposits or residues from the manufacturing process. 4. Turn on the coffee maker: Connect the coffee maker to a power source and turn it on. Allow the water to flow through the coffee maker and into the carafe. 5. Repeat the rinsing process: After the first rinsing cycle is complete, repeat the process by filling the water tank again and running the coffee maker for a second time. By following these steps, you can effectively rinse the Melitta Look Therm coffee maker and remove any water deposits, ensuring a clean and optimal brewing experience.

How do I fill the water tank of the coffee maker?

To fill the water tank of the Melitta Look Therm coffee maker, follow these steps: 1. Open the lid: Locate the lid on top of the coffee maker and lift it up to access the water tank. 2. Check the water level display: Look at the water level display on the side of the coffee maker to determine the desired amount of water to be added. The display usually indicates the number of cups or liters. 3. Fill the water tank: Using a jug or any suitable container, pour the desired amount of cold water into the water tank. Be careful not to exceed the maximum capacity indicated on the tank. 4. Close the lid: After filling the water tank, securely close the lid to ensure a proper seal. 5. Verify the water level: Double-check the water level display to confirm that the correct amount of water has been added. By following these steps, you can easily fill the water tank of the Melitta Look Therm coffee maker and ensure that you have the right amount of water for brewing your desired number of cups of coffee.

How do I use the water level display on the coffee maker?

To use the water level display on the Melitta Look Therm coffee maker, follow these steps: 1. Fill the water tank: Open the lid of the coffee maker and fill the water tank with the desired amount of water using a jug or any suitable container. 2. Observe the water level display: Look at the water level display located on the side of the coffee maker. The display is usually marked with indicators representing the number of cups or liters. 3. Read the water level: The water level display will show the current water level in the tank. It helps you determine if you have added enough water for the desired number of cups of coffee. 4. Adjust the water level if needed: If the water level is below the desired amount, add more water to the tank. If it exceeds the desired amount, carefully pour out the excess water. 5. Close the lid: After adjusting the water level, securely close the lid of the coffee maker. By following these steps, you can effectively use the water level display on the Melitta Look Therm coffee maker to ensure that you have the right amount of water for brewing your desired number of cups of coffee.

How do I make coffee with the Melitta Look Therm coffee maker?

To make coffee with the Melitta Look Therm coffee maker, follow these steps: 1. Fill the water tank: Open the lid on the water tank and fill it with the desired amount of water using the therm jug. Use the water level display on the tank to choose the correct number of cups. 2. Prepare the filter: Open the swivel filter to the left and fold a Melitta filter bag 1x4 at the embossed seam. Place the filter bag in the filter holder and press it into place. 3. Add ground coffee: Put the desired amount of ground coffee into the filter. The amount depends on your personal taste, but a recommended guideline is 6g of ground coffee per large cup. 4. Set the coffee strength: With the Melitta AromaSelector, you can adjust the taste of your coffee from mild-aromatic to strong-intensive. 5. Start the brewing process: Turn on the coffee maker and brewing will begin automatically. The appliance will turn off automatically shortly after brewing is complete. 6. Pour and enjoy: Once the brewing process is finished, you can pour the coffee from the insulated pot by pressing down on the sealing lever. Remove the lid of the pot by pressing the seals on the side while lifting it up. By following these steps, you can easily make delicious coffee with the Melitta Look Therm coffee maker and enjoy a satisfying cup of coffee.

Is the manual of the Melitta Look Therm available in English?

Yes, the manual of the Melitta Look Therm is available in English .

Is your question not listed? Ask your question here

No results