Melitta Linea Unica manual

Melitta Linea Unica
8 · 3
PDF manual
 · 9 pages
English
manualMelitta Linea Unica

Vor der ersten Benutzung

x Unbedingt Gebrauchsanweisung und Sicher-

heitshinweise vollständig lesen.

x Überprüfen Sie, ob die Netzspannung mit der

Spannungsangabe auf der Geräteunterseite

übereinstimmt.

x Reinigen Sie das Gerät durch zwei komplette

Brühvorgänge mit klarem, kaltem Wasser

(ohne Kaffeemehl).

x Das Kabel in gewünschter Länge aus dem

Kabelfach ziehen und in einer der hinteren

Aussparungen im Geräteboden fixieren. Durch

Hineinschieben in das Kabelfach kann das

Kabel auch entsprechend verkürzt werden.

Die Kaffeezubereitung

1. Gerät ans Stromnetz anschließen.

2. Gewünschte Menge frisches, kaltes

Wasser

aus der Glaskanne in den geöffneten Wasser-

tank füllen. (Abb. 1)

Tassenzahl ist an den Skalierungen auf

der Glaskanne und am Wassertank ablesbar.

(Abb. 2)

3. Filterdeckel öffnen (Abb. 3). Dazu den Hebel

(A) nach vorne ziehen, die Deckelverrastung

löst sich, der Deckel kann jetzt geöffnet

werden.

4. Filtertüte

®

102 am seitlichen und unteren

Tütenrand umknicken und in den Schwenkfilter

einlegen. (Abb. 4)

5. Filterfein gemahlenen Kaffee in die Filtertüte

geben. Empfehlung: pro Tasse einen ge-

strichen vollen Messlöffel = ca. 6 g.

6. Filterdeckel schließen – der Verschluss rastet

ein! Glaskanne mit Deckel auf die Warmhalte-

platte unter den Filter stellen.

7. Gerät einschalten – der Ein-/Ausschalter

leuchtet auf (Abb. 5) – der Kaffee wird auto-

matisch zubereitet.

8. Der Tropf-Stopp verhindert Nachtropfen, wenn

die Kanne nach Beendigung des Brühvor-

ganges entnommen wird. (Abb. 6).

9. Nur solange das Gerät eingeschaltet ist, hält

die Warmhalteplatte den Kaffee heiß.

Zusätzliche Hinweise:

Ö Brühvorgang nur mit aufgesetztem Glas-

kannendeckel starten – nur so ist der Filterver-

schluss geöffnet.

Ö Zwischen zwei Brühvorgängen das Gerät aus-

schalten und ca. 5 Min. abkühlen lassen.

Ö Achten Sie darauf, dass während des Brüh-

vorgangs der Filterdeckel immer eingerastet ist.

Ö Öffnen Sie den Filterdeckel während des

Brühvorgangs nicht.

Reinigung und Pflege

Vor dem Reinigen immer den Netzstecker ziehen.

Abnehmbare Teile:

Filter, Glaskanne und -deckel können mit heißem

Wasser und Spülmittel oder in der Geschirrspül-

maschine gereinigt werden.

Basis-Gerät:

Verwenden Sie ein weiches feuchtes Tuch und

etwas Spülmittel für die äußere Reinigung.

Gerät und Gerätezuleitung niemals unter fließen-

dem Wasser reinigen oder in Wasser eintauchen.

Keine scharfen oder scheuernden Reinigungs-

mittel verwenden.

Entkalken

Kalkablagerungen im Gerät sind unvermeidlich.

Regelmäßiges Entkalken (nach 40 Filtervorgän-

gen) sichert die einwandfreie Funktion. Verwen-

den Sie zum Entkalken Swirl Bio-Kalklöser oder

Swirl Schnellentkalker.

Wichtig:

Nach dem Entkalken unbedingt 2 bis 3 Brühvor-

gänge mit klarem, kaltem Wasser (ohne Kaffee-

mehl) durchführen.

Ersatzglaskannen sind im Handel oder beim

Melitta-Zentralkundendienst erhältlich.

Sicherheitshinweise:

x Beim Betrieb werden Teile des Gerätes (z. B.

die Warmhalteplatte) heiß: Vermeiden

Sie eine Berührung.

x Benutzen Sie das Gerät nur außerhalb der

Reichweite von Kindern.

x Sorgen Sie dafür, daß die Zuleitung nicht die

heiße Warmhalteplatte berührt.

x Vor jeder Reinigung und bei längerer Ab-

wesenheit den Netzstecker ziehen.

x Das Gerät niemals in Wasser tauchen.
x Glaskanne und Deckel sind nicht mikro-

wellengeeignet.

x Kein heißes Wasser einfüllen, sondern nur

frisches, kaltes Wasser.

x Während des Brühvorganges nie den

Filterdeckel öffnen.

x Das Auswechseln des Netzkabels und alle

sonstigen Reparaturen dürfen nur vom Melitta

Kundendienst oder einer ähnlich qualifizierten

Person durchgeführt werden.

Before preparing your first cup

of coffee . . .

x read all operating and safety instructions

carefully.

x make sure that the voltage in your home

corresponds with the voltage indicated on the

bottom of the appliance.

x clean the appliance by filling the water tank

with clear cold

water and allow the water to run

through (without coffee).

x Pull the mains lead out to the required length

and fix it to the bottom of the appliance by

pressing it into one of the gaps provided. You

can shorten it by pushing it back into the

compartment.

Coffee Preparation

1. Insert plug of the appliance into socket.

2. Raise lid of water tank and pour the required

amount of fresh cold

water out of the glass jug

into the water tank. (Fig. 1) The number of cups

of coffee is determined by referring to the scale

on the glass jug and the water level indicator.

(Fig. 2)

3. Open the lid of the filter unit (Fig. 3); first you

have to release the lid, which is clicked into

place by pulling the lever (A), then you can

raise it.

4. Fold over the seamed edges of the filter bag

(size 102) and place it in the filter. (Fig. 4)

5. Scoop the filter-fine ground coffee into the filter

bag. Recommendation: use one level coffee

measure (approx. 6g) per cup or vary

according to taste.

6. Shut the lid of the filter unit and click it into

place. Place the glass jug, covered with the lid

,

on to the hot plate under the filter unit.

7. Switch the appliance on – the on/off switch

lights up. (Fig. 5) showing the machine is

operating.

8. The “drip-stop” prevents dripping, when the jug

is taken away after filtration. (Fig. 6)

9. As long as the machine is switched on, the hot

plate keeps the coffee hot. For best result, it is

advisable not to keep filtered coffee warm for

more than

1
/
2

an hour.

Additional Instructions:

Ö Before starting the brewing cycle, the lid must

be on the glass jug to ensure that the filter

outlet is open.

Ö Switch the machine off between two brewing

cycles and leave it to cool down for approx. 5

minutes.

Ö Make sure that the lid of the filter unit always

remains shut, when the coffee is being brewed.

Ö Do not raise the lid of the filter unit whilst

brewing coffee.

Cleaning and maintenance

Always pull the plug out of the socket before

cleaning.

Detachable parts:

Filter insert, glass jug and lid may be cleaned with

hot water and washing-up liquid or may be

washed in the dishwasher.

Basic appliance:

Use a soft damp cloth and washing-up liquid for

cleaning the exterior. Appliance and cord should

never be cleaned under running water or immerse

in water. Do not use scouring pads or harsh

abrasives.

Descaling:

In hard water areas scale will eventually build up

in your machine which unfortunately cannot be

avoided.

You should descale your machine regularly

(at the latest after every 40 filtrations) to ensure

perfect operation, Use Swirl

®

Bio-Descaler or

Swirl

®

Quick-Descaler for efficient descaling.

Important:

After descaling repeat brewing process with clear

cold

water (without coffee) at least 2 to 3 times.

Replacement glass jugs are available from your

retailer.

Safety instructions:

x When the appliance is switched on, some parts

(e.g. hot plate) of the appliance become hot. Do

not touch – risk of burning!

x Always keep the appliance out of the reach of

children.

x Never allow the cord to come into contact with

the plate.

x Always pull the plug out of the socket before

cleaning or in case of absence for a long time.

x Never immerse the appliance in water.
x Glass jug and lid are not microwave-proof.
x Do not use hot water. Only fresh, cold water

should be used to fill in the water tank.

x Do not remove the glass jug from the hot plate

until all the water has run through, otherwise

the “drip-stop” might cause the filter to

overflow.

x Do not open the filter lid during brewing

process – risk of burning!

x The replacement of the cord and all other

repairs must be carried out by authorized

Melitta Customer Service Centres only or by a

person of similar qualifications.

D GB

View the manual for the Melitta Linea Unica here, for free. This manual comes under the category coffee makers and has been rated by 3 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Melitta Linea Unica or do you need help? Ask your question here

Need help?

Do you have a question about the Melitta and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Melitta Linea Unica is a drip coffee maker that is designed to provide a convenient and efficient brewing experience. With a water tank capacity of 1 liter, it allows for a decent amount of coffee to be brewed at once. This coffee maker also features a water level indicator, enabling users to easily monitor the amount of water in the tank. Equipped with an illuminated on/off switch, the Linea Unica offers a user-friendly interface, ensuring effortless operation. It also includes an anti-drip function, preventing any mess or spills during and after the brewing process. The Linea Unica utilizes the Melitta 102 filter, known for its quality and compatibility with the machine. This ensures that the brewed coffee is smooth and flavorsome. Included with the coffee maker is a jug, allowing for easy pouring and serving of the brewed coffee. The jug is designed to seamlessly fit with the Linea Unica, providing a convenient and practical addition to the coffee brewing process. As a countertop appliance, this coffee maker is suitable for placement in any kitchen or workspace. Its compact and sleek design adds a touch of elegance to the overall aesthetic. In summary, the Melitta Linea Unica is a drip coffee maker that offers a capacity of 1 liter, a water level indicator, an illuminated on/off switch, an anti-drip function, and a Melitta 102 filter. With its included jug and countertop placement, it provides a convenient and stylish solution for brewing delicious coffee.

General
BrandMelitta
ModelLinea Unica | 5658084
Productcoffee maker
EAN4006508166862, 4006508169689
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Water tank capacity1 L
Capacity in cups8-12 cups
Anti-drip functionYes
Coffee input type-
Coffee maker type-
Built-in grinder-
Product typeDrip coffee maker
Appliance placementCountertop
CertificationVDE, GS, CE
Keep warm functionYes
Ergonomics
Water level indicatorYes
Illuminated on/off switchYes
Product colorStainless steel
Housing material-
Built-in display-
Other features
FilterMelitta 102
JugYes
Power
AC input voltage230 V
Power800 W
Packaging data
Package width178 mm
Package depth257 mm
Package height395 mm
Package weight2950 g
Cooking functions & programs
Coffee makingYes
Multi beverageNo
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Melitta Linea Unica below.

What certifications does the Melitta Linea Unica have?

The Melitta Linea Unica has the following certifications: VDE, GS, CE.

How often should I descale my coffee maker?

How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.

What is the best way to descale my coffee maker?

To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.

What is espresso?

Espresso is a small amount of concentrated coffee.

How long can I keep coffee beans?

The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.

What is the best way to store coffee?

It is recommended to store coffee in an airtight and clean container.

What does the grind say about the taste of the coffee?

How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.

How do I troubleshoot if the coffee maker is not brewing coffee?

To troubleshoot if the Melitta Linea Unica coffee maker is not brewing coffee, you can follow these steps: 1. Check the power supply: Ensure that the coffee maker is properly plugged into a functioning power outlet. If the power indicator light is not illuminated, try plugging the coffee maker into a different outlet. 2. Check the water level: Make sure that the water tank is filled with enough water to brew coffee. Refer to the water level indicator on the glass jug and add fresh cold water accordingly. 3. Check the filter unit: Open the lid of the filter unit and ensure that the filter bag is properly placed inside. If necessary, fold over the seamed edges of the filter bag and scoop the appropriate amount of coffee grounds into it. 4. Close the filter unit: Shut the lid of the filter unit and make sure it clicks into place. Place the glass jug, covered with the lid, onto the hot plate under the filter unit. 5. Turn on the coffee maker: Switch on the coffee maker using the on/off switch. The indicator light should illuminate, indicating that the machine is operating. 6. Allow the brewing process: Let the coffee maker complete the brewing process. The "drip-stop" feature will prevent dripping when the jug is taken away after filtration. 7. Check for blockages: If the coffee maker is still not brewing coffee, check for any blockages in the water tank, filter unit, or the coffee outlet. Clean any blockages that you find. By following these troubleshooting steps, you should be able to resolve the issue of the coffee maker not brewing coffee.

What should I do if the coffee maker is not turning on?

To troubleshoot if the Melitta Linea Unica coffee maker is not turning on, you can follow these steps: 1. Check the power supply: Ensure that the coffee maker is properly plugged into a functioning power outlet. If the power indicator light is not illuminated, try plugging the coffee maker into a different outlet. 2. Check the power cord: Make sure that the power cord is securely connected to the coffee maker and the power outlet. Check for any visible damage or fraying on the cord. If there is any damage, do not use the coffee maker and contact customer service for assistance. 3. Reset the machine: If the coffee maker has a reset button or switch, press or flip it to reset the machine. This can help resolve any temporary electrical issues. 4. Check the water tank: Ensure that the water tank is properly filled with water. Some coffee makers have a safety feature that prevents the machine from turning on if the water level is too low. Fill the water tank to the appropriate level indicated in the manual. 5. Contact customer service: If the coffee maker still does not turn on after following these steps, it may indicate a more significant issue. Contact the Melitta customer service for further assistance and troubleshooting. By following these troubleshooting steps, you should be able to determine the cause of the coffee maker not turning on and resolve the issue.

How can I troubleshoot if the coffee maker is leaking water?

To troubleshoot if the Melitta Linea Unica coffee maker is leaking water, you can follow these steps: 1. Check the water tank: Ensure that the water tank is properly filled with water up to the indicated level. Overfilling the tank can cause water to overflow and leak. 2. Check the filter unit: Open the lid of the filter unit and make sure that the filter bag is properly placed inside. Ensure that the filter bag is not torn or damaged, as this can cause water to leak during the brewing process. 3. Check the glass jug: Ensure that the glass jug is properly positioned on the hot plate under the filter unit. Make sure that the lid of the glass jug is securely closed to prevent any leakage. 4. Clean the appliance: Regularly clean the coffee maker to remove any residue or debris that may be causing the leakage. Use hot water and dishwashing liquid to clean the detachable parts like the filter insert, glass jug, and lid. Avoid using abrasive materials that can damage the surfaces. 5. Descaling: If the coffee maker continues to leak after cleaning, it may be due to mineral buildup. Regularly descale the coffee maker using a suitable descaling solution to remove any scale deposits that can affect the performance of the machine. By following these troubleshooting steps, you should be able to identify and resolve the issue of the coffee maker leaking water.

What should I do if the coffee maker is not maintaining the correct brewing temperature?

To troubleshoot if the Melitta Linea Unica coffee maker is not maintaining the correct brewing temperature, you can follow these steps: 1. Check the power supply: Ensure that the coffee maker is properly plugged into a functioning power outlet. If the power is not reaching the machine, it may affect the brewing temperature. 2. Check the water temperature: Make sure that you are using cold, fresh water to fill the water tank. Using hot water can affect the brewing temperature and result in inconsistent coffee quality. 3. Clean the appliance: Regularly clean the coffee maker to remove any residue or buildup that may be affecting the heating element. Use hot water and dishwashing liquid to clean the detachable parts like the filter insert, glass jug, and lid. 4. Descaling: If the coffee maker continues to have temperature issues, it may be due to mineral buildup. Regularly descale the coffee maker using a suitable descaling solution to remove any scale deposits that can affect the heating element's performance. 5. Contact customer service: If the coffee maker still does not maintain the correct brewing temperature after following these steps, it may indicate a more significant issue. Contact the Melitta customer service for further assistance and troubleshooting. By following these troubleshooting steps, you should be able to identify and resolve the issue of the coffee maker not maintaining the correct brewing temperature.

How do I troubleshoot if the coffee maker is producing weak or watery coffee?

To troubleshoot if the Melitta Linea Unica coffee maker is producing weak or watery coffee, you can follow these steps: 1. Check the coffee-to-water ratio: Ensure that you are using the correct amount of coffee grounds for the amount of water being used. Refer to the recommended coffee-to-water ratio in the manual and adjust accordingly. 2. Check the grind size: Ensure that the coffee grounds are the appropriate size for your brewing method. If the grounds are too coarse, it can result in weak coffee. If they are too fine, it can lead to over-extraction and bitterness. 3. Check the filter: Make sure that the filter is clean and properly placed in the filter unit. A clogged or improperly positioned filter can affect the flow of water through the coffee grounds, resulting in weak coffee. 4. Check the water temperature: Ensure that the water being used is at the correct temperature for brewing. If the water is too hot, it can over-extract the coffee and result in bitterness. If it is too cold, it can lead to under-extraction and weak coffee. 5. Clean the appliance: Regularly clean the coffee maker to remove any residue or buildup that may be affecting the brewing process. Use hot water and dishwashing liquid to clean the detachable parts like the filter insert, glass jug, and lid. By following these troubleshooting steps, you should be able to identify and resolve the issue of the coffee maker producing weak or watery coffee.

Does the Melitta Linea Unica have a water level indicator?

Yes, the Melitta Linea Unica has a water level indicator. This is beneficial for users as it allows them to easily see how much water is left in the tank without having to open the appliance.

Does the Melitta Linea Unica have an illuminated on/off switch?

Yes, the Melitta Linea Unica has an illuminated on/off switch. This feature makes it convenient for users to see if the coffee maker is turned on or off, especially in low light conditions.

Does the Melitta Linea Unica have an anti-drip function?

Yes, the Melitta Linea Unica has an anti-drip function. This means that users can remove the carafe during the brewing process without worrying about coffee dripping onto the countertop, making it a user-friendly feature.

What is the filter type used in the Melitta Linea Unica?

The Melitta Linea Unica uses a Melitta 102 filter. This filter ensures optimal extraction of coffee flavor and aroma, resulting in a high-quality cup of coffee for the user.

Does the Melitta Linea Unica have a keep warm function?

Yes, the Melitta Linea Unica has a keep warm function. This allows the user to keep their brewed coffee warm for a longer period of time, ensuring that they can enjoy a hot cup of coffee even if they are not able to drink it immediately.

Is the manual of the Melitta Linea Unica available in English?

Yes, the manual of the Melitta Linea Unica is available in English .

Is your question not listed? Ask your question here

No results