Melitta Latticia OT manual

Melitta Latticia OT
7.5 · 5
PDF manual
 · 188 pages
English
manualMelitta Latticia OT
Basisinstellingen
55
NL
U kunt de hoeveelheid drank veranderen
door aan de instelknop "Hoeveelheid
koe" te draaien.

5.3 Maalgraad instellen

Met welke maalgraad de koebonen wor-
den gemalen, is van invloed op de smaak
van de koe. Hoe jner de maalgraad is
ingesteld, des te sterker wordt de koe.
De maalgraad is optimaal ingesteld in de
fabriek. Verander de instelling voor de
maalgraad pas na ca. 100koebereidin-
gen (na ongeveer 1 maand, afhankelijk van
de koeconsumptie).
Met de hefboom "Maalgraadinstelling"
kunt u de maalgraad optimaal instellen.
Stel de maalgraad alleen in tijdens het
maalproces.
Informatie! Stel de maalgraad niet
te jn in. De maalgraad is optimaal
ingesteld als de koe gelijkmatig uit
de uitloop stroomt en er een jne, vaste
crema ontstaat.

6 Basisinstellingen

U vindt de basisinstellingen in de Service-
modus1. Het aantal verlichte koebonen
symboliseert de ingestelde waarde.

6.1 O time instellen

Wanneer u het apparaat gedurende
langere tijd niet bedient, wordt het eerst
in de energiebespaarmodus gezet. Later
schakelt het apparaat volledig uit.
Wanneer het apparaat in de energiebespa-
rende modus staat, kunt u het activeren
door kort te drukken op een willekeurige
bedieningstoets.
1.

Druk langer dan 2seconden op de
bedieningstoets "Water/service".
2.

Druk zo vaak op de bedie-
ningstoets "Water/service" tot de
weergave 2x brandt.
3.

Druk zo vaak op de bedie-
ningstoets "Koesterkte" tot de
gewenste tijd is ingesteld.
4.

Houd de bedieningstoets "Water/
service" langer dan 2seconden inge-
drukt om de instelling op te slaan en de
servicemodus te verlaten.
Druk op een gewenste bereidingstoets
om de servicemodus te verlaten zonder
de instelling op te slaan.
Display Energiebesparende
modus na:
Uitschakelen na:
3 minuten 30 minuten

10 minuten 1 uur
 
20 minuten 4 uur
 
knipperen
30 minuten 8 uur

6.2 Waterhardheid instellen

De waterhardheid van het leidingwater is
van invloed op hoe vaak u het apparaat
moet ontkalken. Hoe harder het leiding-
water is, des te vaker moet u het apparaat
ontkalken.
Bepaal de waterhardheid met de meegele-
verde teststroken. Neem de aanwijzingen
op de teststroken en in de volgende tabel
in acht.
Waterhardheid °d °e °f
zacht 0tot10 0tot13 0tot18
gemiddeld 10tot15 13tot19 18tot27
hard 15tot20 19tot25 27tot36
zeer hard > 20 > 25 > 36

View the manual for the Melitta Latticia OT here, for free. This manual comes under the category coffee makers and has been rated by 5 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Melitta Latticia OT or do you need help? Ask your question here

Need help?

Do you have a question about the Melitta and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
P
Pedro de LachiondoDecember 6, 2023

In my coffee maker, it suddenly doesn't make coffee. The steam button intermittently releases water vapor. I have tried everything and it's still not working.

In my coffee maker, it suddenly doesn't make coffee. The steam button intermittently releases water vapor. I have tried every...
zoom-in
View photo
This message has been automatically translated
A
AvremiJuly 31, 2023

the clean indicator will not turn off after going through the clean cycle.

the clean indicator will not turn off after going through the clean cycle.
zoom-in
View photo
A
AvremiJuly 31, 2023

technical

The Melitta Latticia OT is a coffee maker that is capable of brewing and frothing milk for lattes, cappuccinos, and other espresso-based drinks. Featuring a sleek and modern design, this coffee maker is equipped with an intuitive touch screen display that allows users to easily select their desired drink and adjust the settings to their preferences. With a powerful 15-bar pressure pump, the Melitta Latticia OT is capable of extracting rich, full-bodied espresso with a thick and creamy crema. The machine also features an integrated milk frother that can be adjusted to produce milk foam that is hot or cold, dense or airy, depending on the user's preference. Equipped with a removable 1.2-liter water tank and a 0.5-liter milk container, the Melitta Latticia OT is easy to clean and maintain. It also includes a removable drip tray and a descaling program that helps to keep the machine in optimal condition. The Melitta Latticia OT is designed to be user-friendly and efficient, with a range of features that make it ideal for home use. Whether you are a coffee aficionado or simply looking for an easy and convenient way to enjoy your favorite espresso-based drinks, the Melitta Latticia OT is a top-of-the-line coffee maker that is sure to impress.

General
BrandMelitta
ModelLatticia OT
Productcoffee maker
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Melitta Latticia OT below.

How often should I descale my coffee maker?

How often a coffee machine needs to be descaled depends on how often it is used and the hardness of the water. If hard water is used it is recommended to descale once a month, if soft water is used once a quarter is sufficient.

What is the best way to descale my coffee maker?

To descale the coffee maker, it is recommended to use a liquid descaling agent which is labelled as suitable for coffee machines.

What is espresso?

Espresso is a small amount of concentrated coffee.

How long can I keep coffee beans?

The best-before date can be found on the packaging of the coffee beans. This best-before date applies as long as the bag is closed.

What is the best way to store coffee?

It is recommended to store coffee in an airtight and clean container.

What does the grind say about the taste of the coffee?

How the coffee beans are ground strongly influences the taste of the coffee. If the coffee beans are very finely ground you will have a stronger taste and if the grind is coarser you will have a milder taste.

Why is the coffee not brewing at the right temperature?

Ensure that you have properly set the water temperature control knob on the coffee maker to the desired temperature. Adjust it accordingly if you prefer hotter or cooler coffee.

Why is the coffee coming out too weak?

It is possible that you are not using the correct coffee-to-water ratio. Make sure to use the recommended amount of coffee grounds for the desired number of cups. Also, check the grind size of your coffee as a finer grind may result in a weaker brew.

Why is the milk frother not producing enough foam?

Ensure that the milk you are using is the right temperature for frothing, typically cold milk works best. Make sure to use milk with a higher fat content as it produces better foam. Additionally, check that the steam wand is properly cleaned and free from any blockages.

Why is the coffee maker not turning on?

Double-check that the coffee maker is securely plugged into a power outlet and that the outlet is functioning. If the power supply is okay, make sure the switch or button used to turn on the coffee maker is properly activated.

Why is water leaking from the coffee maker?

First, make sure that the water tank is properly inserted and seated into its designated position. Inspect the water tank and surrounding area for any visible cracks or damages that may be causing leakage. Additionally, ensure that the water reservoir is properly filled within its capacity limits to avoid overflow.

Is the manual of the Melitta Latticia OT available in English?

Yes, the manual of the Melitta Latticia OT is available in English .

Is your question not listed? Ask your question here

No results