Mean Well HLG-240H-24B manual

Mean Well HLG-240H-24B
7.5 · 1
PDF manual
 · 7 pages
English
manualMean Well HLG-240H-24B
Installation Manual
TypeLED Power Supply
FamiliesAP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP

Introduction

The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plastic case, and PCB types.

Installation

1Before commencing any installation or maintenance work, please disconnect the power supply from the utility.
Ensure that it cannot be re-connected inadvertently!
2Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
3Mounting orientations other than standard orientation or operate under high ambient temperature may
increase the internal component temperature and will require a de-rating in output current. Please refer to
the specification sheet to receive the optimum mounting position and information about the de-rating curve.
4Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specification.
5For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting
fixture is tight so that water cannot intrude into the system.
6For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “Ptype, require 40mA each unit; for those with “3 in 1” dimming
function, e.g. HLG and LPF series, require 0.15mA each unit.
7Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
aConnect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this
step can be skipped when the unit is marked class II, ungrounded.
bConnect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
cConnect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).
s

View the manual for the Mean Well HLG-240H-24B here, for free. This manual comes under the category Not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Mean Well HLG-240H-24B or do you need help? Ask your question here

Need help?

Do you have a question about the Mean Well and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Mean Well owners to provide you with a good answer.

Number of questions: 0

General
Mean Well
HLG-240H-24B | HLG-240H-24B
Not categorized
English
User manual (PDF)
Weight & dimensions
Weight1318.3 g
Height38.8 mm
Width68 mm
Depth244.2 mm
Power
Output voltage24 V
Output current10 A
AC input voltage90 - 305 V
Features
Output power240 W
International Protection (IP) codeIP20
Technical details
Sustainability certificatesRoHS
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Mean Well HLG-240H-24B below.

Is your question not listed? Ask your question here

No results