View the manual for the Maytronics Dolphin Supreme M3 here, for free. This manual comes under the category not categorized and has been rated by 3 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Maytronics Dolphin Supreme M3 or do you need help? Ask your question here
The Maytronics Dolphin Supreme M3 is a robot pool cleaner designed for efficiently cleaning all types of residential swimming pools. It is equipped with intelligent scanning technology that allows it to navigate the pool and clean both the floor and walls effectively. The robot is powered by a low-voltage transformer for safety and energy efficiency. The Maytronics Dolphin Supreme M3 features a top-loading filter cartridge system for easy maintenance and cleaning. It has a tangle-free swivel cable that ensures the robot can move freely around the pool without getting stuck. The robot is equipped with advanced software that enables it to optimize its cleaning path and coverage, resulting in a thorough cleaning performance. Additionally, the Maytronics Dolphin Supreme M3 is designed with a sleek and compact design that allows it to easily maneuver through the pool. It is equipped with durable brushes that help scrub away dirt and debris. The robot is equipped with various cleaning programs and timers that allow users to schedule cleaning sessions according to their preferences. Overall, the Maytronics Dolphin Supreme M3 offers a convenient and effective solution for maintaining a clean swimming pool.
| Brand | Maytronics |
| Model | Dolphin Supreme M3 |
| Product | not categorized |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytronics Dolphin Supreme M3 below.
Simply press and hold the power button located on the control unit until the device turns on. The LED indicator will light up once it is powered on.
To program a cleaning cycle, press the "Program" button on the control unit. Use the arrow buttons to set the desired cleaning time and then press "Program" again to confirm.
If the device gets stuck, check if any debris or objects are blocking the impeller or brushes. Remove any obstructions and restart the cleaning cycle. Additionally, ensure that the power cord is not tangled or twisted, as this can affect the unit's movement.
To clean the filter cartridges, remove them from the unit by lifting the lid on top of the robot. Rinse the cartridges thoroughly with clean water to remove any dirt or debris. Once clean, replace them back into the unit and securely close the lid.
If the cleaning performance seems inadequate, first check if the filter cartridges are clean and properly installed. Additionally, ensure that the nozzles, brushes, and impeller are not clogged or damaged. Cleaning these components and restarting the cleaning cycle should help improve the performance.
Yes, the manual of the Maytronics Dolphin Supreme M3 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Maytronics and is the answer not in the manual?
Question and answer
Number of questions: 5I have a Dolphin M3 pool vacuum. I plugged it in the other day and all three lights just blink constantly and the unit won’t turn on.
1 comment
To turn on the Dolphin Supreme M3 pool vacuum, follow these steps: 1. Plug the floating cable from the robot pool cleaner into the power supply unit. 2. Plug the electrical cable from the power supply unit into the mains. 3. Press the ON/OFF switch. 4. The robot pool cleaner will now start to work. If all three lights on the Dolphin M3 pool vacuum are blinking constantly and the unit won't turn on, please make sure to check the following: 1. Ensure that the power supply unit is properly connected to the floating cable and the mains. 2. Verify that the power supply unit is not immersed in water and is splash-proof. 3. Unplug the power supply unit before any servicing activity. 4. Make sure the pool cleaner is placed in the water before plugging in the power supply unit. 5. Check if the mains outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI). Please note that it is important not to enter the swimming pool while the pool cleaner is working.
This answer is automatically generatedGood afternoon, I must replace the polyurethane rings that the traction rollers have, these are worn out, should the plastic roller that contains them be disassembled? In other words, should the ends of the plastic axis through which the toothed belt passes be removed? Indicated in the photo with a yellow arrow.
Why doesn’t my dolphin keep working
After cleaning, it won’t go.
Wheels are occasionally coming off. Could it be the rubber belts stretching or is their an adjustment ? It’s an older model M-3 and where can I get parts ?