Maytag MVW7230HW manual

Maytag MVW7230HW
7.8 · 4
PDF manual
 · 32 pages
English
manualMaytag MVW7230HW

WASHER INSTALLATION & CARE INSTRUCTION MANUAL

MANUEL D’INSTRUCTION D’INSTALLATION

ETD’ENTRETIENDE LA LAVEUSE

MANUAL DE INSTRUCCIONES PARA LA INSTALACIÓN

YELCUIDADO DE LA LAVADORA

W11197727A

Table of Contents

WASHER SAFETY .........................................................2
INSTALLATION REQUIREMENTS ................................3
Tools and parts ......................................................... 3
Location Requirement .............................................4
Drain System ............................................................4
Electrical Requirements ..........................................5
INSTALLATION INSTRUCTIONS ..................................5
Connect Drain Hose .................................................6
Connect Inlet Hoses ................................................7
Level Washer ............................................................8
Complete Installation Checklist ..............................9
WASHER MAINTENANCE AND CARE ........................9
Water Inlet Hoses .....................................................9
Washer Care .............................................................9
Non-Use And Vacation Care ................................10
Cleaning Your Dispenser .......................................10
Winter Storage Care ..............................................11
Transporting Your Washer .....................................11
Reinstalling/Using Washer Again .........................11

Table des matières

SÉCURITÉ DE LA LAVEUSE ......................................12
EXIGENCES D’INSTALLATION ..................................13
Outils et pièces .......................................................13
Exigences d’emplacement ....................................14
Système de vidange ...............................................14
Spécications électriques ..................................... 15
INSTRUCTIONS D’INSTALLATION ............................15
Raccordement du tuyau devidange ....................16
Raccordement des tuyaux d’alimentation ...........17
Mise à niveau de la laveuse ..................................18
Liste de vérication pour installation terminée ...19
ENTRETIEN ET RÉPARATION DELA LAVEUSE .......19
Tuyaux d’arrivée d’eau ........................................... 19
Entretien de la laveuse ..........................................19
Non utilisation et entretien enpériode
de vacances ............................................................20
Nettoyage du distributeur .....................................20
Entretien pour entreposage hivernal ....................21
Transport de la laveuse .........................................21
Réinstallation/réutilisation delalaveuse .............21

Índice

SEGURIDAD DE LA LAVADORA ................................ 22
REQUISITOS DE INSTALACIÓN ................................23
Herramientas y piezas ...........................................23
Requisitos de ubicación ........................................24
Sistema de desagote .............................................24
Requisitos eléctricos .............................................25
INSTRUCCIONES DE INSTALACIÓN ........................26
Conecte la manguera de desagote ......................27
Conexión de las mangueras deentrada ..............27
Nivelación de la lavadora ......................................28
Lista de control de la instalación terminada .......29
MANTENIMIENTO Y CUIDADO DELA LAVADORA .30
Mangueras de entrada de agua ............................ 30
Cuidado de la lavadora .......................................... 30
Cuidado durante períodos sin uso yen
lasvacaciones ........................................................ 31
Limpieza del depósito ............................................31
Cuidado para el almacenamiento durante
elinvierno................................................................31
Transporte de la lavadora ......................................31
Cómo reinstalar o usar la lavadoranuevamente ...32

View the manual for the Maytag MVW7230HW here, for free. This manual comes under the category washing machines and has been rated by 4 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Maytag MVW7230HW or do you need help? Ask your question here

Need help?

Do you have a question about the Maytag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 117
P
Pammy August 29, 2022

Agitator broke apart into 3 pieces during wash cycle. (Nothing heavy and it wasn’t off balance). We ordered another agitator from Maytag, but we need suggestions on how to remove bottom bolt so we can put the new one on

Agitator broke apart into 3 pieces during wash cycle. (Nothing heavy and it wasn’t off balance).  We ordered another agitator...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 21, 2023

To remove the bottom bolt of the agitator from the Maytag MVW7230HW washing machine, please follow these steps: 1. Remove the packing tray from the tub. Open the lid and remove the cardboard packing tray from the tub. Make sure to remove all other packaging materials from the washer tub. 2. Free the power cord. Firmly grasp the power cord plug and pull it to free it from the rear panel. Gently place the power cord over the control panel to allow free access to the back of the washer. 3. Attach the drain hose to the drain port. Remove the red plastic plug from the black drain port on the back of the washer. If the clamp is not already in place on the elbow end of the drain hose, slide it over the end. Squeeze the clamp with pliers and slide the black elbow end of the drain hose onto the black drain port. Secure it with the clamp. 4. Place the drain hose in the standpipe. Place the hose into the standpipe or over the side of the laundry tub. Make sure that 4.5 inches (114 mm) of the drain hose is inside the standpipe. Do not force excess hose into the standpipe or lay it on the bottom of the laundry tub. Use the provided drain hose form.

This answer is automatically generated
B
BettyAugust 9, 2020

When I try to wash on heavy duty why won’t the washer add any water? It goes straight into washing with no water. I wanted to use warm water and extra power.

4 comments
E
Emma of manua.lsDecember 17, 2023

When washing on the heavy-duty cycle, if the washer does not add any water and goes straight into washing, there may be a few possible reasons for this issue. First, ensure that the water supply is properly connected and turned on. Check the water inlet hoses for any kinks or blockages that may be restricting the water flow. If the water supply is fine, it is possible that the load size or type is not suitable for the heavy-duty cycle. The heavy-duty cycle is designed for large, heavily soiled loads. If the load is small or lightly soiled, the washer may not add as much water. Additionally, the washer may have a water level sensor that detects the load size and adjusts the water level accordingly. If the sensor is malfunctioning, it may not detect the need for additional water. To address this issue, try the following steps: 1. Check the water supply - ensure it is properly connected and turned on, and check for any kinks or blockages in the water inlet hoses. 2. Adjust the load size - consider adding more items to increase the load size if it is small or lightly soiled. 3. Check the water level sensor - if the problem persists, there may be an issue with the sensor. For further assistance, please contact Maytag support.

This answer is automatically generated
K
KarenAugust 20, 2020

When I try to wash a heavy load washing machine did not fill with water, started agitating with no water. I wanted the washer to fill with water first then agigate.

T
Tonya Todd December 14, 2022

Mine does too! Please HELP!!!! THANK YOU!!!!

A
AshleyAugust 7, 2021

My washer will say sensing when started but never locked the lid and then says washing complete without ever doing anything after about a minute. It is 8 months old - how can I reset the control panel? I have unplugged over night and its still doing the same thing this morning

3 comments
E
Emma of manua.lsOctober 25, 2023

To reset the control panel of your Maytag MVW7230HW washing machine, follow these steps: 1. Disconnect the washing machine from the power source. 2. Wait for at least 1 minute. 3. Reconnect the washing machine. 4. Press and hold the "Control Lock" button for 3 seconds to unlock the control panel. 5. Choose the desired cycle and settings. 6. Press the "Start" button to begin the wash cycle.

This answer is automatically generated
M
MARY BLACKFebruary 7, 2022

My washer will say sensing when started but never locked the lid and then says washing complete without ever doing anything after about a minute. It is 8 months old - how can I reset the control panel? I have unplugged over night and its still doing the same thing this morning

J
JenniferFebruary 20, 2023

Did you get an answer to this? My washer is doing this!

L
LindaJune 9, 2024

When I want to halt the cycle to add an item, what do I do?

J
Janie April 27, 2024

How to clean the filter in washer if there is an oder in my top load washer it is only 8 months old

W
Willie AndersonFebruary 10, 2021

How do we reduce the soaking time- on normal it is set for 2 hours

1 comment
A
Ann MacDonaldApril 25, 2021

What does the message E07 mean

P
Patt JacobsSeptember 28, 2021

Where do you add bleach? I see where the detergent and fabric softener is added, but don't see where to add bleach

C
CynthiaOctober 4, 2021

How do I add Oxyclean granules to my washer Model MVW7230HW? i want to use this in addition to liquid detergent which I put in the pull out drawer.

S
Sharon LintonFebruary 4, 2022

Can I load the clothes first to the washer instead of last? Quick ref says to load them after setting cycle and power and start.

The Maytag MVW7230HW is a washing machine designed for residential use. With its sleek and modern design, it blends seamlessly with contemporary home interiors. This washing machine offers a variety of features and functions to meet the needs of households of all sizes. Equipped with a spacious drum capacity, the Maytag MVW7230HW can accommodate large loads of laundry, allowing for more efficient and time-saving laundry cycles. Its powerful motor ensures thorough cleaning and effective stain removal. The machine also offers multiple cycle options, including delicate, heavy-duty, and quick wash cycles, allowing users to customize the washing process to suit their specific needs. The Maytag MVW7230HW is designed to be user-friendly and intuitive. It features a user-friendly control panel with clear and easy-to-understand icons, making it simple for users of all ages to operate. Additionally, it has a large display screen that provides real-time updates on the progress of the wash cycle, as well as options for adjusting settings such as water temperature and spin speed. In terms of efficiency, the Maytag MVW7230HW is designed to conserve both water and energy. With its advanced sensors, the machine optimizes water usage based on the load size, ensuring that no excess water is wasted. It also features a high-efficiency motor and advanced insulation, reducing energy consumption and minimizing noise during operation. Overall, the Maytag MVW7230HW is a reliable and durable washing machine, offering a range of features designed to simplify the laundry process while delivering optimal cleaning performance.

General
BrandMaytag
ModelMVW7230HW
Productwashing machine
EAN883049462257
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Instructions / Assembly (PDF), Warranty information (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytag MVW7230HW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my washing machine not turning on?

Check if the power cord is properly connected to a functional power outlet. Additionally, ensure that the circuit breaker has not tripped.

What should I do if the water is not filling up in the machine?

Verify that the water supply valves are fully turned on. Make sure the inlet hoses are securely connected to both the machine and the water supply.

How can I resolve excessive vibration during the spin cycle?

Confirm that the machine is level by adjusting the leveling legs. Ensure that the load is balanced by redistributing the clothes evenly in the drum.

Why is my washing machine not draining properly?

Check the drain hose for kinks or blockages. Ensure that the height of the drain hose is between 39-96 inches (99-244 cm) to ensure proper drainage.

What can I do if the machine displays an error code?

Take note of the error code displayed on the control panel and refer to the troubleshooting section of the manual for specific instructions on resolving the issue.

Is the manual of the Maytag MVW7230HW available in English?

Yes, the manual of the Maytag MVW7230HW is available in English .

Is your question not listed? Ask your question here

No results