Maytag MVW6200KW manual

Maytag MVW6200KW
9.1 · 14
PDF manual
 · 132 pages
English
manualMaytag MVW6200KW

À L’USAGE EXCLUSIF DU TECHNICIEN DE MAINTENANCE

NE PAS ENLEVER OU DÉTRUIRE56

TEST D’ACTIVATION DES BOUTONS ET ENCODEURS

REMARQUE : Le mode diagnostic d’entretien doit être activé avant d’accéder au
test d’activation des boutons et encodeurs; consulter la procédure à la page 54.
Procédure d’entrée
Appuyer brièvement sur la touche 1, utilisée pour l’activation du mode de
diagnostic d’entretien.
Les tests suivants seront accessibles :
DIAGNOSTIC : Test d’activation des boutons et encodeurs
Le test de l’encodeur sera actif immédiatement après avoir réussi le test
d’activation des boutons et d’encodeur :
Lorsque le test de l’encodeur démarre, l’une des DEL du groupe
d’indicateurs d’état sera allumée.
Tourner le bouton dans le sens horaire/antihoraire à partir de la position
actuelle jusqu’à ce qu’une rotation complète du bouton soit terminée.
Noter que les DEL du groupe d’indicateurs d’état s’allument/s’éteignent
lorsque le bouton est tourné. Une fois le test de l’encodeur terminé,
toutes les DEL seront allumées et le test d’activation des boutons sera
actif.
Test d’activation des boutons
Appuyer sur chaque bouton pour activer/désactiver les DEL correspondantes :
La DEL groupe 1 bascule sur marche/arrêt avec la touche 1.
La DEL groupe 2 bascule sur marche/arrêt avec la touche 2.
La DEL groupe 3 bascule sur marche/arrêt avec la touche 3.
La DEL groupe 4 bascule sur marche/arrêt avec la touche 4.
La DEL groupe 5 bascule sur marche/arrêt avec la touche 5/MISE EN
MARCHE.
La DEL groupe 6 bascule sur marche/arrêt avec la touche 6/ALIMENTATION.
Si les DEL ne basculent pas sur MARCHE/ARRÊT après avoir appuyé sur
les boutons et tourner le bouton de sélection de programme, accéder au
TEST : N° 4 IHM.
Procédure de sortie
Pour quitter l’activation des boutons et le test de l’encodeur, appuyer longuement
sur la touche 1, utilisée pour activer le mode de diagnostic d’entretien.

MODE TEST D’ENTRETIEN

REMARQUE : Le mode diagnostic d’entretien doit être activé avant d’accéder
au mode de test d’entretien; consulter la procédure à la page 54.
REMARQUE : Si, à n’importe quel moment, l’utilisateur appuie le bouton POWER
(alimentation) ou ouvre la porte sans que ce soit demandé par la séquence de
test durant le mode de diagnostic d’entretien, la laveuse quitte le mode d’attente.
REMARQUE : La porte doit être fermée pour effectuer le test.
Affichage du code d’anomalie dans le mode de test de dépannage
Si l’afficheur se met à clignoter en mode Test d’entretien, il affiche un code
d’anomalie actif. Les codes d’anomalie actifs sont des codes qui sont
présentement détectés. Un seul code d’anomalie actif peut être affiché à la fois.
Procédure d’entrée
Pour entrer en mode de test d’entretien, appuyer brièvement sur la touche 2,
utilisée pour activer le mode de diagnostic d’entretien, puis appuyer brièvement
sur le bouton START (mise en marche). Toutes les DEL s’allumeront pour
indiquer que l’entrée en mode de test d’entretien est réussie.
Effectuer tous les tests : Après avoir appuyé sur le bouton START (mise en
marche), la séquence de test à partir de la page 57 démarre.
Procédure de sortie
Lorsque le test est terminé, appuyer sur le bouton POWER (alimentation) pour
quitter le mode de test d’entretien et revenir au mode attente.

View the manual for the Maytag MVW6200KW here, for free. This manual comes under the category washing machines and has been rated by 14 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Maytag MVW6200KW or do you need help? Ask your question here

Need help?

Do you have a question about the Maytag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 216
A
Annetta SmallJune 10, 2024

how many gallons of water for one load? What is the range of gallons of water for the different cycles?

P
Patrick Mahoney June 2, 2024

My Maytag washer mvw6200kw2 starts preliminary spin doesn’t fill than goes to drain in done cycle

B
Beverly MasoveroJuly 21, 2021

If washer load not level how can I shift load without starting cycle all over again? Model mvw6200kw1

If washer load not level how can I shift load without starting cycle all over again? Model mvw6200kw1
zoom-in
View photo
N
Nancy KeysonOctober 10, 2021

I will be having this washer delivered in a week. I see that reviews are stating problems with draining. I had this problem with a Midea that was only 2 weeks old. Is there a pump filter that the consumer can clean?

I will be having this washer delivered in a week. I see that reviews are stating problems with draining. I had this problem w...
zoom-in
View photo
S
SandraOctober 23, 2021

Done 2 loads. My new washer works until it gets to the rinse/spin cycle. At this point, the tub spins constantly with intermittent spurts of water, never filling to rinse the load. It then continues to spin. I eventually had to stop the cycle using the power button. Anyone? Thanks. Translation: I have completed 2 loads of laundry. My new washing machine works well until it reaches the rinse/spin cycle. At this point, the tub keeps spinning continuously with occasional bursts of water, but it never fills up to rinse the load. After that, it continues to spin without progressing. Eventually, I had to stop the cycle by using the power button. Does anyone have any solutions? Thank you.

Done 2 loads. My new washer works until it gets to the rinse/spin cycle. At this point, the tub spins constantly with intermi...
zoom-in
View photo
This message has been automatically translated
K
Kristen Seymour December 10, 2022

I would like to turn the chime on for when the washer had finished a cycle but they're are no buttons for this? Recently bought a house that came with this washer MVW6200k*

I would like to turn the chime on for when the washer had finished a cycle but they're are no buttons for this? Recently boug...
zoom-in
View photo
A
ArinJune 26, 2023

I put a refresh cleaning tablet in the washer and put the washer on clean washer setting and it ran water for a few seconds then drained and now it’s not doing anything but the lid lock light and the three lights at the top of the screen just keep flashing

I put a refresh cleaning tablet in the washer and put the washer on clean washer setting and it ran water for a few seconds t...
zoom-in
View photo
N
Nicole December 26, 2023

Is the soap tray supposed to open on its own at the end of a wash cycle? Mine does this a lot.

Is the soap tray supposed to open on its own at the end of a wash cycle? Mine does this a lot.
zoom-in
View photo
N
NatJanuary 27, 2021

6200 KW washer. Does the machine sense the amount of load of clothes to determine level of water released into the washing drum?

C
Caitlin WerthFebruary 25, 2021

How do you know when a load is complete? Right now the machine has been flashing 'sense' and 'done' alternately but the lid is still locked. Will it stay solid on 'done' when it is done? Also, how long do loads usually take? Ours seems to take hours. We ate concerned we might be doing something wrong.

1 comment
C
Charlotte ThomasApril 30, 2021

Have you solve that problem? I have same problem now and just bought this washer.

The Maytag MVW6200KW is a washing machine designed to provide efficient and reliable laundry care. It is equipped with a variety of features to enhance the washing experience. With a sizable capacity, this washing machine can accommodate large loads of laundry, making it suitable for households with heavy laundry needs. It utilizes advanced cleaning technology to effectively remove dirt and stains from clothes, ensuring thorough cleaning results. The MVW6200KW features multiple wash cycles and options, allowing users to customize their laundry settings according to their specific needs. This includes options for different fabric types and levels of soiling, enabling gentle care for delicate garments and more intensive cleaning for heavily soiled items. The washing machine is designed with an intuitive control panel that makes it easy to navigate and select the desired settings. It also offers a range of convenient features, such as a delay start option that allows users to set a specific time for the wash cycle to begin. In terms of efficiency, the MVW6200KW is built to conserve water and energy, helping to reduce utility costs and environmental impact. It operates quietly, minimizing disturbances while the machine is running. Constructed with durable materials, this washing machine is built to withstand regular use and provide long-term reliability. It is designed to function smoothly and efficiently, ensuring optimal performance over time. Overall, the Maytag MVW6200KW is a dependable and efficient washing machine that offers a range of features to simplify laundry care and deliver satisfactory cleaning results.

General
BrandMaytag
ModelMVW6200KW
Productwashing machine
EAN883049583211
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytag MVW6200KW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my washing machine not turning on?

Make sure the machine is plugged into a working electrical outlet and that the circuit breaker has not tripped. Additionally, check if the washer's door is securely closed, as the machine will not operate if the door is open or not properly latched.

Why is my laundry coming out still wet?

Ensure that the selected cycle and settings match your laundry load. If using a high-efficiency detergent, make sure it is appropriate for your type of load. Check if the drain hose is properly connected and not kinked. Adjust the spin speed if necessary, as a slower speed may leave clothes damp.

Why does my washer make excessive noise during operation?

Verify that the unit is level and stable on the floor. Ensure that the load is balanced inside the drum, as unbalanced loads can cause increased noise. Additionally, check if any foreign objects, such as coins or buttons, are trapped inside the tub or pump, as they can contribute to the noise.

How can I clean the washing machine drum?

Run a cleaning cycle with a washing machine cleaner specifically designed to remove dirt and residue. Alternatively, you can wipe the drum interior using a mixture of mild detergent and water, making sure to rinse thoroughly afterward. Avoid using abrasive cleaners or bleach, as they may damage the drum.

Why is my washer displaying error codes?

Different error codes indicate specific issues. To troubleshoot, try turning off the washer and unplugging it for a few minutes before restarting. If the error persists, consult the user manual for a list of error codes and their corresponding solutions. You can also contact customer support for further assistance.

Is the manual of the Maytag MVW6200KW available in English?

Yes, the manual of the Maytag MVW6200KW is available in English .

Is your question not listed? Ask your question here

No results