Maytag MVW6200KW manual

Maytag MVW6200KW
9.1 · 14
PDF manual
 · 132 pages
English
manualMaytag MVW6200KW

PARA SER USADO ÚNICAMENTE POR TÉCNICOS DE SERVICIO

NO QUITAR NI DESTRUIR100

PRUEBA DE ACTIVACIÓN DE BOTÓN Y PRUEBA

DEL CODIFICADOR

NOTA: El modo de diagnóstico de servicio se debe activar antes de ingresar a la
prueba de activación de botón y prueba del codificador; consulte el procedimiento
en la página 98.
Procedimiento de ingreso
Presione y suelte el la tecla 1 que se usó para activar el modo de diagnóstico
de servicio.
La siguiente prueba estará disponible:
DIAGNÓSTICO: Prueba de activación de botón y prueba del codificador
La prueba del codificador se activará de inmediato, después de que ingrese con
éxito en la Prueba de activación de botón y prueba del codificador.
Cuando comience la prueba del codificador, se encenderá uno de los
LED del grupo de indicador de estado.
Gire la perilla hacia la derecha o hacia la izquierda, a partir de la posición
actual, hasta que la perilla complete una rotación total. Observe que los
LED del grupo de indicador de estado se encenderá o apagarán mientras
gira la perilla. Después de que se complete la prueba del codificador,
se encenderán todos los LED y se activará la prueba de activación de
botón.
Prueba de activación de botón
Si presiona cada botón, alternará entre encendido y apagado de su LED
correspondiente:
El grupo 1 de LED alternará entre encendido y apagado con la tecla 1.
El grupo 2 de LED alternará entre encendido y apagado con la tecla 2.
El grupo 3 de LED alternará entre encendido y apagado con la tecla 3.
El grupo 4 de LED alternará entre encendido y apagado con la tecla 4.
El grupo 5 de LED alternará entre encendido y apagado con la tecla 5/
START (Inicio).
El grupo 6 de LED alternará entre encendido y apagado con la tecla 6/
POWER (Encendido).
Si los LED no alternan entre encendido y apagado después de presionar
los botones y girar la perilla del selector de ciclo, vaya a la PRUEBA:
N.º 4 HMI.
Procedimiento de salida
Para salir de la prueba de activación de botón y la prueba del codificador,
mantenga presionada la tecla 1 que usó para activar el modo de diagnóstico
de servicio.

MODO DE PRUEBA DE SERVICIO

NOTA: El modo de diagnóstico de servicio se debe activar antes de ingresar
al modo de prueba de servicio; consulte el procedimiento en la página 98.
NOTA: Si, en algún momento, el usuario presiona el botón POWER (Encendido)
o abre la puerta cuando no lo solicita la secuencia de prueba durante el modo
de prueba de servicio, la lavadora sale del modo de espera.
NOTA: La tapa debe estar cerrada para realizar la prueba.
Visualización de código de falla activa en el modo de prueba de servicio
Si la pantalla comienza a parpadear mientras está en el modo de prueba de
servicio, indica un código de falla activo. Los códigos de falla activos son
códigos que se detectan actualmente. Solo puede mostrarse un código de
falla activo a la vez.
Procedimiento de ingreso
Para ingresar en el modo de prueba de servicio, presione y suelte la tecla 2
que se usa para activar el modo de diagnóstico de servicio y, a continuación,
presione y suelte el botón START (Inicio). Se encenderán todos los LED para
indicar que el ingreso al modo de prueba de servicio fue exitoso.
Realización de todas las pruebas: Después de presionar el botón START
(Inicio), comenzará la secuencia de prueba de la página 101.
Procedimiento de salida
Cuando se complete la prueba, presione el botón POWER (Encendido) para
salir del modo de prueba de servicio y volver al modo de espera.

View the manual for the Maytag MVW6200KW here, for free. This manual comes under the category washing machines and has been rated by 14 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Maytag MVW6200KW or do you need help? Ask your question here

Need help?

Do you have a question about the Maytag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 216
A
Annetta SmallJune 10, 2024

how many gallons of water for one load? What is the range of gallons of water for the different cycles?

P
Patrick Mahoney June 2, 2024

My Maytag washer mvw6200kw2 starts preliminary spin doesn’t fill than goes to drain in done cycle

B
Beverly MasoveroJuly 21, 2021

If washer load not level how can I shift load without starting cycle all over again? Model mvw6200kw1

If washer load not level how can I shift load without starting cycle all over again? Model mvw6200kw1
zoom-in
View photo
N
Nancy KeysonOctober 10, 2021

I will be having this washer delivered in a week. I see that reviews are stating problems with draining. I had this problem with a Midea that was only 2 weeks old. Is there a pump filter that the consumer can clean?

I will be having this washer delivered in a week. I see that reviews are stating problems with draining. I had this problem w...
zoom-in
View photo
S
SandraOctober 23, 2021

Done 2 loads. My new washer works until it gets to the rinse/spin cycle. At this point, the tub spins constantly with intermittent spurts of water, never filling to rinse the load. It then continues to spin. I eventually had to stop the cycle using the power button. Anyone? Thanks. Translation: I have completed 2 loads of laundry. My new washing machine works well until it reaches the rinse/spin cycle. At this point, the tub keeps spinning continuously with occasional bursts of water, but it never fills up to rinse the load. After that, it continues to spin without progressing. Eventually, I had to stop the cycle by using the power button. Does anyone have any solutions? Thank you.

Done 2 loads. My new washer works until it gets to the rinse/spin cycle. At this point, the tub spins constantly with intermi...
zoom-in
View photo
This message has been automatically translated
K
Kristen Seymour December 10, 2022

I would like to turn the chime on for when the washer had finished a cycle but they're are no buttons for this? Recently bought a house that came with this washer MVW6200k*

I would like to turn the chime on for when the washer had finished a cycle but they're are no buttons for this? Recently boug...
zoom-in
View photo
A
ArinJune 26, 2023

I put a refresh cleaning tablet in the washer and put the washer on clean washer setting and it ran water for a few seconds then drained and now it’s not doing anything but the lid lock light and the three lights at the top of the screen just keep flashing

I put a refresh cleaning tablet in the washer and put the washer on clean washer setting and it ran water for a few seconds t...
zoom-in
View photo
N
Nicole December 26, 2023

Is the soap tray supposed to open on its own at the end of a wash cycle? Mine does this a lot.

Is the soap tray supposed to open on its own at the end of a wash cycle? Mine does this a lot.
zoom-in
View photo
N
NatJanuary 27, 2021

6200 KW washer. Does the machine sense the amount of load of clothes to determine level of water released into the washing drum?

C
Caitlin WerthFebruary 25, 2021

How do you know when a load is complete? Right now the machine has been flashing 'sense' and 'done' alternately but the lid is still locked. Will it stay solid on 'done' when it is done? Also, how long do loads usually take? Ours seems to take hours. We ate concerned we might be doing something wrong.

1 comment
C
Charlotte ThomasApril 30, 2021

Have you solve that problem? I have same problem now and just bought this washer.

The Maytag MVW6200KW is a washing machine designed to provide efficient and reliable laundry care. It is equipped with a variety of features to enhance the washing experience. With a sizable capacity, this washing machine can accommodate large loads of laundry, making it suitable for households with heavy laundry needs. It utilizes advanced cleaning technology to effectively remove dirt and stains from clothes, ensuring thorough cleaning results. The MVW6200KW features multiple wash cycles and options, allowing users to customize their laundry settings according to their specific needs. This includes options for different fabric types and levels of soiling, enabling gentle care for delicate garments and more intensive cleaning for heavily soiled items. The washing machine is designed with an intuitive control panel that makes it easy to navigate and select the desired settings. It also offers a range of convenient features, such as a delay start option that allows users to set a specific time for the wash cycle to begin. In terms of efficiency, the MVW6200KW is built to conserve water and energy, helping to reduce utility costs and environmental impact. It operates quietly, minimizing disturbances while the machine is running. Constructed with durable materials, this washing machine is built to withstand regular use and provide long-term reliability. It is designed to function smoothly and efficiently, ensuring optimal performance over time. Overall, the Maytag MVW6200KW is a dependable and efficient washing machine that offers a range of features to simplify laundry care and deliver satisfactory cleaning results.

General
BrandMaytag
ModelMVW6200KW
Productwashing machine
EAN883049583211
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytag MVW6200KW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why is my washing machine not turning on?

Make sure the machine is plugged into a working electrical outlet and that the circuit breaker has not tripped. Additionally, check if the washer's door is securely closed, as the machine will not operate if the door is open or not properly latched.

Why is my laundry coming out still wet?

Ensure that the selected cycle and settings match your laundry load. If using a high-efficiency detergent, make sure it is appropriate for your type of load. Check if the drain hose is properly connected and not kinked. Adjust the spin speed if necessary, as a slower speed may leave clothes damp.

Why does my washer make excessive noise during operation?

Verify that the unit is level and stable on the floor. Ensure that the load is balanced inside the drum, as unbalanced loads can cause increased noise. Additionally, check if any foreign objects, such as coins or buttons, are trapped inside the tub or pump, as they can contribute to the noise.

How can I clean the washing machine drum?

Run a cleaning cycle with a washing machine cleaner specifically designed to remove dirt and residue. Alternatively, you can wipe the drum interior using a mixture of mild detergent and water, making sure to rinse thoroughly afterward. Avoid using abrasive cleaners or bleach, as they may damage the drum.

Why is my washer displaying error codes?

Different error codes indicate specific issues. To troubleshoot, try turning off the washer and unplugging it for a few minutes before restarting. If the error persists, consult the user manual for a list of error codes and their corresponding solutions. You can also contact customer support for further assistance.

Is the manual of the Maytag MVW6200KW available in English?

Yes, the manual of the Maytag MVW6200KW is available in English .

Is your question not listed? Ask your question here

No results