Maytag MVW5035MW manual

Maytag MVW5035MW
9.2 · 3
PDF manual
 · 20 pages
English
manualMaytag MVW5035MW
4
For non-removable dispensers:
To remove residue from the dispensers, wipe them with an
affresh
®
Machine Cleaning Wipe or a damp cloth and towel dry.
Do not attempt to remove the dispensers or trim for cleaning. The
dispensers and trim are not removable.
For removable dispensers:
If your model has a dispenser drawer, press tab(s) to remove the
drawer and clean it with an affresh
®
Machine Cleaning Wipe or a
damp cloth and towel dry before or after you run the Clean
Washer cycle. Use an all-purpose surface cleaner, if needed.

Cleaning the outside of the washer

IMPORTANT: To avoid damaging the washer’s finish, do not use
abrasive products.
Use an affresh
®
Machine Cleaning Wipe, a soft, damp cloth, or
sponge to wipe away any spills. Use an affresh
®
Machine
Cleaning Wipe or only mild soaps or cleaners when cleaning
external washer surfaces.

Nonuse and Vacation Care

Operate your washer only when you are home. If moving, or not
using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer to avoid flooding due to water
pressure surge.

Winter Storage Care

IMPORTANT: To avoid damage, install and store washer where it
will not freeze. Because some water may stay in hoses, freezing
can damage washer. If storing or moving during freezing weather,
winterize your washer.

To winterize washer:

1. Shut off both water faucets; disconnect and drain water inlet
hoses.
2. Put 1 L (1 qt.) of R.V.-type antifreeze in basket and run washer
on Rinse & Spin cycle for about 30 seconds to mix antifreeze
and remaining water.
3. Unplug washer or disconnect power.

Transporting Your Washer

1. Shut off both water faucets. Disconnect and drain water inlet
hoses.
2. If washer will be moved during freezing weather, follow
“Winter Storage Care” directions before moving.
3. Disconnect drain hose from drain system and drain any
remaining water into a pan or bucket. Disconnect drain hose
from back of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Drape power cord over edge and into washer basket.
7. Place original shipping materials back inside washer. If you do
not have shipping materials, place heavy blankets or towels
into basket opening. Close lid and place tape over lid and
down front of washer. Keep lid taped until washer is placed in
new location. Transport washer in the upright position.

Reinstalling/Using Washer Again

WARNING

Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
To reinstall washer after nonuse, vacation, winter storage, or
moving:
1. Refer to Installation Instructions to locate, level, and connect
washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
4. Plug into a grounded 3 prong outlet or reconnect power.
5. See your online Cycle Guide for information about which
cycle(s) to run your washer through to clean washer and
remove antifreeze, if used. Use only HE High Efficiency
detergent. Use half the manufacturer’s recommended amount
for a medium-size load.

View the manual for the Maytag MVW5035MW here, for free. This manual comes under the category washing machines and has been rated by 3 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Maytag MVW5035MW or do you need help? Ask your question here

Need help?

Do you have a question about the Maytag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 18
A
Al WeinbaumDecember 5, 2023

The door lock will not unlock and the lights are flashing. How do you reset the machine and unlock the door

The door lock will not unlock and the lights are flashing. How do you reset the machine and unlock the door
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 25, 2023

To reset the Maytag MVW5035MW washing machine and unlock the door when the door lock is not unlocking and the lights are flashing, follow these steps: Press the "Power/Cancel" button to cancel the current cycle. Wait for a few minutes to allow the machine to reset. Once the machine has reset, press the "Start" button to start a new cycle. The door lock should now unlock, and you can open the door.

This answer is automatically generated
C
Cristina ArreguinFebruary 26, 2024

Temperature settings. I have changed the settings to cold and have turned off the hot water supply first. My washer won't run unless it has warm/hot water, how can I set it to work with cold water only?

Temperature settings. I have changed the settings to cold and have turned off the hot water supply first. My washer won't run...
zoom-in
View photo
1 comment
E
Emma of manua.lsMarch 5, 2024

To set the Maytag MVW5035MW washing machine to work with cold water only, follow these steps: 1. Make sure the hot water supply is turned off. 2. Press the Power button to turn on the washing machine. 3. Select the desired wash cycle and options. 4. Press the Temperature button to access the temperature settings. 5. Use the arrow buttons to scroll through the available temperature options. 6. Select the "Cold" temperature setting. 7. Press the Start button to begin the wash cycle. By following these steps, the washing machine will operate using cold water only.

This answer is automatically generated
C
C VokeyMay 15, 2024

Clothes did not spin out water today and I tried the drain/spin function but it did not work. What is this used for? What do you do in this situation

M
Maryke PotJuly 4, 2023

how do i get this machine to soak?? the loads take so long to wash whats up with that thinking it will take way to my hydro

V
Vilma GonzalezJanuary 7, 2024

We live in an area where the water goes out. It is customary to fill the washing machine as another method of having water available. You stop this machine; it throws the water away. How do you make sure this doesn't happen?

R
RosalieMarch 24, 2024

I talked to Maytag to make sure I got a washer that would allow me to soak. I was told this model allows for soaking. How is this done??? The door locks so I can't open it when the machine loads the water.

R
Robert F PalumboJuly 16, 2023

I have a new Maytag washer MVW5035MW. The machine turns on but will not move past "Sense". The Sense light flashes for a few minutes but never moves to the Fill/Soak stage. My dials are set to: Extra Power-Warm-Towels-Medium and Auto.

1 comment
E
EdJune 3, 2024

@Robert F Palumbo Having same issue, no idea, 18 month old and does not work, not impressed with this machine

M
Margaret Duval December 22, 2023

I just got this machine hooked and did a trial run and now it won't finish the cycle and the lid is locked!

D
Dena LannenJanuary 28, 2024

How do I get top off, lid lock tab broke. Took 2 screws off back, but it won't budge.

N
Norma SchmitzMarch 16, 2024

Why do my clothes come out of the washing machine with dry spots?

General
BrandMaytag
ModelMVW5035MW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Datasheet (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytag MVW5035MW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why isn't the washing machine turning on when I press the power button?

Make sure the machine is properly plugged in and the power cord is securely connected to the outlet. Check the circuit breaker to ensure it hasn't tripped. If these are all in order, there might be an issue with the power supply or internal components, in which case you should contact a professional technician for assistance.

Why is water leaking from underneath the washer?

Check that the water supply hoses are securely connected and not damaged. Make sure the drain hose is properly inserted into the standpipe or drain opening. If the issue persists, there could be a problem with the water inlet valve or pump, requiring professional attention.

How can I resolve excessive vibration or shaking during the wash cycle?

Confirm that the machine is level by adjusting the leveling feet as necessary. Ensure that the load is distributed evenly inside the drum and not overloaded. Examine the floor beneath the washer to make sure it is stable and not causing the vibration. If the problem persists, there might be an issue with the suspension system or drum, and it's advisable to seek professional assistance.

Why are my clothes coming out wrinkled after washing?

Ensure that you are following the recommended load size and not overstuffing the washer. Select the appropriate wash cycle for the fabric type to avoid excessive agitation. If wrinkles persist, promptly remove the clothes from the machine after the cycle ends to prevent them from sitting too long. Additionally, adjusting the spin speed or using a different temperature setting may help reduce wrinkles.

How can I troubleshoot a spinning or agitating issue during a cycle?

Check whether the lid or door is completely closed and securely latched. Ensure that the cycle has been properly selected and initiated. If the issue persists, there might be a problem with the motor, drive belt, or transmission, which would require professional diagnosis and repair.

Is the manual of the Maytag MVW5035MW available in English?

Yes, the manual of the Maytag MVW5035MW is available in English .

Is your question not listed? Ask your question here

No results