Maytag MVW5035MW manual

Maytag MVW5035MW
9.2 · 3
PDF manual
 · 20 pages
English
manualMaytag MVW5035MW
13
2. Méthode avec agent de blanchiment au chlore (autre
option) :
a. Ouvrir la porte de la laveuse et retirer tout vêtement ou
article.
b. Verser 1 tasse (236 mL) d’agent de blanchiment liquide au
chlore dans le distributeur d’agent de blanchiment.
REMARQUE: L’emploi d’une quantité d’eau de Javel
supérieure à ce qui est recommandé ci-dessus pourrait
endommager la laveuse avec le temps.
c. Rabattre le couvercle de la laveuse.
d. Ne pas ajouter de détergent ou autre composé chimique
dans la laveuse lors de l’exécution de cette procédure.
e. Sélectionner le programme recommandé pour nettoyer
l’intérieur de la laveuse.
f. Appuyer sur le bouton Start (mise en marche/reprise) pour
démarrer le programme.
REMARQUE: Pour obtenir des résultats optimaux, ne pas arrêter
un programme. Si un programme doit être interrompu, appuyer
sur le bouton Power/Cancel (alimentation/annulation). (Pour les
modèles qui n’ont pas ce bouton, maintenir enfoncé le bouton
Start/Pause [mise en marche/pause] pendant 3 secondes.) Une
fois le programme arrêté, lancer un programme de rinçage et
d’essorage pour évacuer le nettoyant de la laveuse.

Nettoyage des distributeurs

Après avoir utilisé la laveuse pendant longtemps, on peut parfois
constater une accumulation de résidus dans les distributeurs de la
laveuse.
IMPORTANT: Les distributeurs ne sont pas lavables au lave-
vaisselle.
Pour les distributeurs fixes :
Pour éliminer les résidus des distributeurs, les essuyer avec une
lingette de nettoyage de machine
®
affresh ou un chiffon humide et
sécher avec une serviette. Ne pas tenter de retirer les
distributeurs ou la garniture pour le nettoyage. Les distributeurs et
la garniture ne peuvent pas être retirés.
Pour les distributeurs amovibles :
Si votre modèle est muni d’un tiroir de distribution, appuyer sur les
onglets pour retirer le tiroir et le nettoyer avec une lingette
®
de
nettoyage de machine affresh ou un chiffon humide et sécher
avec une serviette avant ou avoir effectué un programme
de nettoyage de la laveuse. Si nécessaire, utiliser un nettoyant
tout usage.

Nettoyage de l’extérieur de la laveuse

IMPORTANT: Afin d’éviter d’endommager le revêtement de la
laveuse, ne pas utiliser de produits abrasifs.
Utiliser une lingette
®
affresh pour nettoyer la machine, une
éponge ou un chiffon doux et humide pour essuyer tout
renversement. Utiliser une lingette Utiliser uniquement une
lingette de nettoyage ou des savons et nettoyants doux pour
nettoyer la surface externe de la laveuse.

Non utilisation et entretien avant les

vacances

Faire fonctionner la laveuse seulement lorsqu’on est présent. Lors
d’un déménagement ou lorsque la laveuse n’est pas utilisée
pendant longtemps, suivre les étapes suivantes :
1. Débrancher la laveuse ou déconnecter la source de courant
électrique.
2. Fermer l’alimentation en eau à la laveuse pour éviter toute
inondation due à une surpression.

Entretien pour entreposage hivernal

IMPORTANT: Pour éviter tout dommage, installer et remiser la
laveuse à l'abri du gel. L'eau qui peut rester dans les tuyaux
risque d’abîmer la laveuse en temps de gel. Si la laveuse doit faire
l'objet d'un déménagement ou d’entreposage au cours d'une
période de gel, hivériser la laveuse.

Hivérisation de la laveuse :

1. Fermer les deux robinets d’eau; déconnecter et vidanger les
tuyaux d’arrivée d’eau.
2. Placer 1 pte (1 L) d’antigel pour véhicule récréatif dans le
panier et faire fonctionner la laveuse sur un programme Rinse
& Spin (rinçage et essorage) pendant environ 30 secondes
pour mélanger l’antigel et l’eau restante.
3. Débrancher la laveuse ou déconnecter la source de courant
électrique.

Transport de la laveuse

1. Fermer les deux robinets d’eau. Débrancher et vidanger les
tuyaux d’arrivée d’eau.
2. Pour déplacer la laveuse pendant une période de gel, suivre
les instructions de la section « Entretien pour entreposage
hivernal » avant de le déplacer.
3. Déconnecter le tuyau d’évacuation du système de vidange et
vider l’eau qui reste dans un bac ou un seau. Déconnecter le
tuyau d’évacuation de l’arrière de la laveuse.
4. Débrancher le cordon d’alimentation.
5. Placer les tuyaux d’arrivée d’eau et le tuyau d’évacuation
dans le panier de la laveuse.
6. Faire passer le cordon d’alimentation par dessus le bord et le
mettre dans le panier de la laveuse.
7. Replacer le matériel d’emballage d’origine de l’appareil à
l’intérieur de la laveuse. Si vous n’avez plus l’emballage
d’expédition, placer des couvertures lourdes ou des serviettes
dans l’ouverture du panier. Fermer le couvercle et placer du
ruban adhésif sur le couvercle et jusqu’à la partie inférieure
avant de la laveuse. Laisser le couvercle fermé par l’adhésif
jusqu’à ce que la laveuse soit installée à son nouvel
emplacement. Déplacer la laveuse en position verticale.

Réinstallation/réutilisation de la

laveuse

A VERTISSEMENT

Risque de choc électrique
Brancher sur une prise à 3 alvéoles reliée à la terre.
Ne pas enlever la broche de liaison à la terre.
Ne pas utiliser un adaptateur.
Ne pas utiliser un câble de rallonge.
Le non-respect de ces instructions peut causer un
décès, un incendie ou un choc électrique.
Pour réinstaller la laveuse après une période de non-
utilisation, de vacances, de remisage pour l’hiver ou après un
déménagement :
après

View the manual for the Maytag MVW5035MW here, for free. This manual comes under the category washing machines and has been rated by 3 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Maytag MVW5035MW or do you need help? Ask your question here

Need help?

Do you have a question about the Maytag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 18
A
Al WeinbaumDecember 5, 2023

The door lock will not unlock and the lights are flashing. How do you reset the machine and unlock the door

The door lock will not unlock and the lights are flashing. How do you reset the machine and unlock the door
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 25, 2023

To reset the Maytag MVW5035MW washing machine and unlock the door when the door lock is not unlocking and the lights are flashing, follow these steps: Press the "Power/Cancel" button to cancel the current cycle. Wait for a few minutes to allow the machine to reset. Once the machine has reset, press the "Start" button to start a new cycle. The door lock should now unlock, and you can open the door.

This answer is automatically generated
C
Cristina ArreguinFebruary 26, 2024

Temperature settings. I have changed the settings to cold and have turned off the hot water supply first. My washer won't run unless it has warm/hot water, how can I set it to work with cold water only?

Temperature settings. I have changed the settings to cold and have turned off the hot water supply first. My washer won't run...
zoom-in
View photo
1 comment
E
Emma of manua.lsMarch 5, 2024

To set the Maytag MVW5035MW washing machine to work with cold water only, follow these steps: 1. Make sure the hot water supply is turned off. 2. Press the Power button to turn on the washing machine. 3. Select the desired wash cycle and options. 4. Press the Temperature button to access the temperature settings. 5. Use the arrow buttons to scroll through the available temperature options. 6. Select the "Cold" temperature setting. 7. Press the Start button to begin the wash cycle. By following these steps, the washing machine will operate using cold water only.

This answer is automatically generated
C
C VokeyMay 15, 2024

Clothes did not spin out water today and I tried the drain/spin function but it did not work. What is this used for? What do you do in this situation

M
Maryke PotJuly 4, 2023

how do i get this machine to soak?? the loads take so long to wash whats up with that thinking it will take way to my hydro

V
Vilma GonzalezJanuary 7, 2024

We live in an area where the water goes out. It is customary to fill the washing machine as another method of having water available. You stop this machine; it throws the water away. How do you make sure this doesn't happen?

R
RosalieMarch 24, 2024

I talked to Maytag to make sure I got a washer that would allow me to soak. I was told this model allows for soaking. How is this done??? The door locks so I can't open it when the machine loads the water.

R
Robert F PalumboJuly 16, 2023

I have a new Maytag washer MVW5035MW. The machine turns on but will not move past "Sense". The Sense light flashes for a few minutes but never moves to the Fill/Soak stage. My dials are set to: Extra Power-Warm-Towels-Medium and Auto.

1 comment
E
EdJune 3, 2024

@Robert F Palumbo Having same issue, no idea, 18 month old and does not work, not impressed with this machine

M
Margaret Duval December 22, 2023

I just got this machine hooked and did a trial run and now it won't finish the cycle and the lid is locked!

D
Dena LannenJanuary 28, 2024

How do I get top off, lid lock tab broke. Took 2 screws off back, but it won't budge.

N
Norma SchmitzMarch 16, 2024

Why do my clothes come out of the washing machine with dry spots?

General
BrandMaytag
ModelMVW5035MW
Productwashing machine
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Warranty information (PDF), Datasheet (PDF), Safety instructions (PDF), Energy label (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytag MVW5035MW below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

Why isn't the washing machine turning on when I press the power button?

Make sure the machine is properly plugged in and the power cord is securely connected to the outlet. Check the circuit breaker to ensure it hasn't tripped. If these are all in order, there might be an issue with the power supply or internal components, in which case you should contact a professional technician for assistance.

Why is water leaking from underneath the washer?

Check that the water supply hoses are securely connected and not damaged. Make sure the drain hose is properly inserted into the standpipe or drain opening. If the issue persists, there could be a problem with the water inlet valve or pump, requiring professional attention.

How can I resolve excessive vibration or shaking during the wash cycle?

Confirm that the machine is level by adjusting the leveling feet as necessary. Ensure that the load is distributed evenly inside the drum and not overloaded. Examine the floor beneath the washer to make sure it is stable and not causing the vibration. If the problem persists, there might be an issue with the suspension system or drum, and it's advisable to seek professional assistance.

Why are my clothes coming out wrinkled after washing?

Ensure that you are following the recommended load size and not overstuffing the washer. Select the appropriate wash cycle for the fabric type to avoid excessive agitation. If wrinkles persist, promptly remove the clothes from the machine after the cycle ends to prevent them from sitting too long. Additionally, adjusting the spin speed or using a different temperature setting may help reduce wrinkles.

How can I troubleshoot a spinning or agitating issue during a cycle?

Check whether the lid or door is completely closed and securely latched. Ensure that the cycle has been properly selected and initiated. If the issue persists, there might be a problem with the motor, drive belt, or transmission, which would require professional diagnosis and repair.

Is the manual of the Maytag MVW5035MW available in English?

Yes, the manual of the Maytag MVW5035MW is available in English .

Is your question not listed? Ask your question here

No results