Maytag MAT20PR manual

Maytag MAT20PR
9.3 · 1
PDF manual
 · 40 pages
English
manualMaytag MAT20PR
W10837721A
W10861220A – SP
TABLE DES MATIÈRES
Page
Sécurité de la laveuse ........................................................... 20
Outillage et pièces ................................................................. 21
Dimensions ............................................................................ 22
Exigences d’emplacement ................................................... 23
Instructions d’installation ..................................................... 24
Établissement de l’aplomb de la laveuse ............................ 25
Raccordement du tuyau de vidange .................................... 26
Système de vidange .............................................................. 27
Raccordement des tuyaux d’arrivée d’eau ......................... 28
Spécications électriques .................................................... 29
Achever l’installation ............................................................. 30
Installation de la glissière et de la boîte à monnaie ........... 30
Taille typique des charges complètes ................................. 30
Entretien de la laveuse .......................................................... 31
Si vous avez besoin d’assistance ........................................ 32
Pièces supplémentaires et accessoires .............................. 32
Instructions de paramétrage des commandes
électroniques .........................................................................33
Garantie .................................................................................. 40

INSTALLATION

INSTRUCTIONS

CommerCial Washer

www.maytagcommerciallaundry.com

INSTRUCTIONS

D’INSTALLATION

laveuse CommerCiale

TABLE OF CONTENTS
Page
Washer Safety .......................................................................... 2
Tools & Parts ............................................................................ 3
Dimensions .............................................................................. 4
Location Requirements ...........................................................5
Installation instructions .......................................................... 6
Level Washer ............................................................................ 7
Connect Drain Hose ................................................................ 8
Drain System ............................................................................ 9
Connect Inlet Hoses .............................................................. 10
Electrical Requirements........................................................11
Complete Installation ............................................................ 12
Installing Coin Slide and Coin Box ....................................... 12
Typical Full Load Sizes .......................................................... 12
Washer Maintenance.............................................................13
If You Need Assistance ......................................................... 14
Alternate Parts & Accessories ............................................. 14
Electronic Controls Set-Up Instructions ............................. 15
Warranty ................................................................................. 19

View the manual for the Maytag MAT20PR here, for free. This manual comes under the category washing machines and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Maytag MAT20PR or do you need help? Ask your question here

Need help?

Do you have a question about the Maytag and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Maytag MAT20PR is a washing machine designed for commercial use. It is built to handle heavy loads and is suitable for use in laundromats, hotels, and other similar settings. This washing machine has a large capacity, allowing users to wash a high volume of laundry efficiently and effectively. It features a durable construction, ensuring it can withstand frequent use and last for a long time. The Maytag MAT20PR is equipped with a range of features to enhance its performance and convenience. It offers multiple wash and rinse temperature options, allowing users to select the appropriate settings for different types of fabrics. It also has a variety of cycle options, including quick wash and soak, giving users flexibility in their laundry routines. This washing machine is designed to be user-friendly. It has easy-to-use controls and a clear display, ensuring that operators can navigate the machine easily and efficiently. It also has a high spin speed, helping to extract as much water as possible from the laundry, reducing drying time. The Maytag MAT20PR is designed to deliver reliable and consistent results. With its advanced features and durable construction, it is a dependable choice for commercial laundry needs. Whether used in a busy laundromat or a hotel laundry room, this washing machine is built to handle the demands of heavy use and deliver clean and fresh laundry every time.

General
BrandMaytag
ModelMAT20PR
Productwashing machine
LanguageEnglish
FiletypeInstallation Guide (PDF), User manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Maytag MAT20PR below.

What temperature should I use for my laundry?

The washing label of your garment shows the recommended washing temperature.

Do I need to use an anti-scaling agent for my washing machine?

It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.

How do I prevent my washing machine from smelling?

Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.

How do I set up the electronic controls on the Maytag MAT20PR washing machine?

To set up the electronic controls on the Maytag MAT20PR washing machine, follow these steps: 1. Make sure the power to the washer is turned off before proceeding. 2. Locate the lower fabric setting key pads and the digital display on the control panel. 3. Use the POWERWASH key pad to adjust the values associated with set-up codes. Pressing the key pad will increment the value. You can also hold the key pad down for rapid adjustment. 4. Use the MIXED key pad to advance through the set-up codes. Pressing the key pad will take you to the next available set-up code. Holding the key pad down will automatically advance through the set-up codes at a rate of one per second. 5. Use the DELICATES key pad to select or deselect options. 6. Use the TEMPERATURE key pad to decrease the set-up code value. 7. If your model is a PD model, insert the access door key, turn it, and lift to remove the access door. For PR models set for free vend, refer to the instructions at the bottom of page 18 for entering operating setup. 8. If your model is a PR model, once the debit card reader is installed according to the reader manufacturer's instructions, you can enter the set-up mode by inserting a set-up card supplied by the reader manufacturer into the card slot. If a manual set-up card is not available, you can enter manual set-up mode by removing connector AA1 on the circuit board. Please note that the console must not be opened unless power is first removed from the washer. To access connector AA1, unplug the washer or disconnect power, open the console, disconnect the plug on AA1, close the console, and then plug in the washer or reconnect power. 9. The washer is now in the set-up mode, and you can proceed with programming the controls according to your preferences. Please note that despite all the options available, you can simply choose to uncrate a new commercial washer, hook it up, plug it in, and have a unit that operates without going through the set-up process.

Why is the display blank and the washing machine not working?

The display on the Maytag MAT20PR washing machine may be blank and the machine may not be working due to various reasons. Here are the possible causes and troubleshooting steps: 1. Power issue: Check if the washer is properly plugged into a working power outlet. Ensure that the power cord is not damaged or loose. Try plugging in another device to verify if the outlet is functioning correctly. 2. Control panel settings: Make sure the washer is not in a standby or sleep mode. Press the power button to wake up the machine and check if the display lights up. If not, proceed to the next step. 3. Circuit breaker or fuse: Check the circuit breaker or fuse box to ensure that the circuit supplying power to the washer is not tripped or blown. Reset the breaker or replace the fuse if necessary. 4. Faulty control board: If none of the above steps resolve the issue, there may be a problem with the control board. In this case, it is recommended to contact a qualified technician or Maytag customer support for further assistance. Please note that these troubleshooting steps are general guidelines and may vary depending on the specific model and configuration of the Maytag MAT20PR washing machine.

How do I perform a cold start or warm start on the Maytag MAT20PR washing machine?

To perform a cold start or warm start on the Maytag MAT20PR washing machine, follow these steps: 1. Press the POWERWASH or TEMPERATURE key pad to access the set-up codes. 2. Use the MIXED key pad to navigate through the set-up codes until you reach the desired temperature setting. 3. Press the DELICATES key pad three consecutive times to select the temperature upgrade price. 4. Increase or decrease the temperature upgrade price by pressing the POWERWASH or TEMPERATURE key pad. 5. Factory presets for temperature upgrade prices are as follows: - COLDCOLD: 0 quarters = $0.00 - COOLCOOL: 0 quarters = $0.00 - WARMWARM: 0 quarters = $0.00 - HOTHOT: 1 quarter = $0.25 6. Once you have set the desired temperature upgrade price, the cold start or warm start is complete. Please note that these steps may vary slightly depending on the specific model and configuration of the Maytag MAT20PR washing machine.

What are the free cycles and how do I enable debit card payment on the Maytag MAT20PR washing machine?

The Maytag MAT20PR washing machine offers free cycles and the option for debit card payment. Here are the steps to enable debit card payment and understand the free cycles: 1. To enable debit card payment, you need to install a debit card reader according to the manufacturer's instructions. Once installed, you can enter the set-up mode by inserting a set-up card provided by the reader manufacturer into the card slot. If a manual set-up card is not available, you can enter manual set-up mode by removing connector AA1 on the circuit board. Please note that the console must not be opened unless power is first removed from the washer. 2. The free cycles on the Maytag MAT20PR washing machine allow you to use the machine without the need for payment. These cycles are pre-set and can be accessed by selecting the corresponding cycle on the control panel. The specific free cycles available may vary depending on the model. Please note that these steps are general guidelines and may vary depending on the specific model and configuration of the Maytag MAT20PR washing machine.

How do I select different options, cycles, and temperature settings on the Maytag MAT20PR washing machine?

To select different options, cycles, and temperature settings on the Maytag MAT20PR washing machine, follow these steps: 1. Use the lower fabric setting key pads and the digital display on the control panel to access the set-up codes and values for programming the controls. 2. Press the POWERWASH key pad to adjust the values associated with set-up codes. Pressing the key pad will increment the value, and holding it down will allow for rapid adjustment. 3. Use the MIXED key pad to navigate through the set-up codes. Pressing the key pad will advance to the next available set-up code, and holding it down will automatically advance through the codes at a rate of one per second. 4. Press the DELICATES key pad to select or deselect options. 5. Use the TEMPERATURE key pad to decrease the set-up code value. 6. To select different cycles, refer to the set-up codes and their corresponding values. Each cycle may have a specific code and associated price. 7. To adjust the temperature settings, use the TEMPERATURE key pad to increase or decrease the temperature value. Please note that the specific set-up codes, values, and options may vary depending on the model and configuration of the Maytag MAT20PR washing machine.

Is the manual of the Maytag MAT20PR available in English?

Yes, the manual of the Maytag MAT20PR is available in English .

Is your question not listed? Ask your question here

No results